[논문]Analysis of AC losses in HTS coils by temperature variations

Kim, Yungil; Lee, Ji-Kwang; Lee, Seyeon; Kim, Woo-Seok; Lee, Siyoung; Choi, Kyeongdal

doi:10.9714/psac.2018.20.4.050

Analysis of AC losses in HTS coils by temperature variations 원문보기

Progress in superconductivity and cryogenics : PSAC, v.20 no.4, 2018년, pp.50 - 54

Kim, Yungil (SuNAM Co. Ltd.) , Lee, Ji-Kwang (Woosuk University) , Lee, Seyeon (Korea Polytechnic University) , Kim, Woo-Seok (Korea Polytechnic University) , Lee, Siyoung (Korea Polytechnic University) , Choi, Kyeongdal (Korea Polytechnic University)

Abstract ▼ AI-Helper

We analyzed the temperature dependency of the AC losses in high temperature superconducting (HTS) coils. In the case of a short sample of an HTS tape, the magnetization loss at 4.2 K could be higher than the one at 77 K for a same transport current. It happens when the perpendicular magnetic field is above a certain magnitude. The AC loss characteristics of solenoidal coils have been analyzed at the temperatures of 65 K and 77 K. They were categorized by the aspect ratios. The operating current of a solenoid was normally set about 70 % of the critical current. An HTS solenoid with the same operating current of 77 K causes larger AC losses at 65 K in the most cases of the HTS solenoids. We also analyzed the AC loss characteristics due to the temperature variations for three types of superconducting magnetic energy storages. Two of them were solenoidal types and the other was toroidal type. The results showed the tendency for the coils to have higher AC losses at lower temperature with the same operating currents and scenarios.

주제어

표/그림 (10)

그림 Fig. 1. Calculated magnetization losses of an HTS tape by magnetic flux densities of at 4.2 K and 77 K.
그림 Fig. 2. Definition of HTS coil shape. The ratio of α=a₂/a₁, β=b₁/a₁.
표 TABLE I THE OPERATING TEMPERATURE RANGES OF HTS APPLICATIONS.
그림 Fig. 3. The normalized loss (loss@65 K to loss@77 K) according to (α, β) for a1= 50 [mm]. Most solenoids except very thin ones have larger AC losses at 65 K when the operating AC currents are same at both temperatures, (a) 1.01 <α< 5, (b) 1.01 <α< 1.1.
그림 Fig. 4. B-I curves of the 4 mm width HTS tape.
표 TABLE II SPECIFICATION OF 2G HTS TAPE FOR THE ANALYSIS.
표 TABLE III SPECIFICATIONS OF THREE SMESS.
그림 Fig. 5. Bird’s eye views of three SMESs. (a) 600 kJ solenoidal type, (b) 2.5 MJ toroidal type, (c) 5 MJ solenoidal type.
표 Fig.6. Operating scenarios of SMES. Scenario 1 is full discharging condition and scenario 2 is repetition of charging and discharging.
표 TABLE IV. THE CALCULATED AC LOSSES OF THREE SMESS.

AI 본문요약
AI-Helper

* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.

가설 설정

2. Definition of HTS coil shape. The ratio of α=a₂/a₁, β=b₁/a₁.
So, we analyzed AC losses for two scenarios. The first scenario for the operation was that SMES fully discharged its energy from 100 % to zero. The other one was assumed to use only 50 % of the stored energy.

참고문헌 (10)

H. K. Yeom, "An Experimental Study of the Conduction Cooling System for the 600 kJ HTS SMES,"IEEE Trans. Appl. Supercond., vol. 18, no. 2, Jun. 2008, pp.741-744.

상세보기
P. Tixador et al., "Design and First Tests of a 800 kJ HTS SMES," in IEEE Transactions on Applied Superconductivity, vol. 17, no. 2, pp. 1967-1972, June 2007.

상세보기
M. J. Park et al., "AC Loss and Thermal Stability of HTS Model Coils for a 600 kJ SMES," in IEEE Transactions on Applied Superconductivity, vol. 17, no. 2, pp. 2418-2421, June 2007.

상세보기
M. Park, "Conceptual Design of HTS Magnet for a 5 MJ Class SMES,"IEEE Trans. Appl. Supercond., vol. 18, no. 2, Jun. 2008, pp.750-753.

상세보기
S.Y. Lee, S.Y. Kwak, J.H. Seo, S.Y. Lee, S.H. Park, W.S. Kim, J.K. Lee, J.H. Bae, S.H. Kim, K.D. Sim, K.C. Seong, H.K. Jung, K. Choi, S. Hahn, Optimal design of HTS magnets for a modular toroid-type 2.5 MJ SMES using multi-grouped particle swarm optimization, Physica C: Superconductivity, Volume 469, Issues 15-20, 15 October 2009, Pages 1789-1793.

상세보기
E. H. Brandt, "Type-II superconductor strip with current in a perpendicular magnetic field,"Physical Rev.B, Vol. 48, No. 17, 12893, 1993

상세보기
John. R. Hull, "Applications of high-temperature superconductors in power technology,"Appl. Phys 66. (2003), pp.1865-1886.
T. Masuda, "High-temperature Superconducting Cable Technology and Development Trends," SEI Tech. Review. no. 59, Jan. 2005, pp.8-13.
G. Snitchler, "The Performance of a 5 MW High Temperature Superconductor Ship Propulsion Motor," IEEE Trans. Appl. Supercond., vol. 15, no. 2, Jun. 2005, pp.2206-2209.

상세보기
G. Snitchler, "10 MW Class Superconductor Wind Turbine Generators,"IEEE Trans. Appl. Supercond., vol. 21, no. 3, Jun. 2011, pp.1089-1092

상세보기

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증