최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Ecology and resilient infrastructure, v.5 no.4, 2018년, pp.276 - 284
이지행 (상지대학교 일반대학원) , 최흥식 (상지대학교 건설시스템공학과)
In order to analyze sediment transport characteristics of knickpoint migration, sediment transport length, and sediment transport weight through the under-flow type vertical lift gate, the hydraulic model experiment and dimensional analysis were performed. The correlations between Froude number and ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
보의 설치 목적은? | 보는 하천 횡단구조물로 수위를 조절하거나 유량, 각종 용수 확보 등을 목적으로 설치한다. 그러나 하천에 설치되는 보는 대부분 고정보 또는 가동보는 흐름의 정체를 유발하여 유사를 퇴적시키며, 이로 인해 홍수위 상승, 저류량 감소 등 많은 문제를 가져온다. | |
하천에 설치되는 보의 문제점은? | 보는 하천 횡단구조물로 수위를 조절하거나 유량, 각종 용수 확보 등을 목적으로 설치한다. 그러나 하천에 설치되는 보는 대부분 고정보 또는 가동보는 흐름의 정체를 유발하여 유사를 퇴적시키며, 이로 인해 홍수위 상승, 저류량 감소 등 많은 문제를 가져온다. 특히 중, 소하천은 준설장비의 진입 및 경제성 등의 이유로 준설이 원활하게 이루어지지 않고 있는 실정이다. | |
하단 배출형 연직수문의 퇴적토 배출특성 분석을 위한 실험에서 위어 월류에 따른 흐름 저항을 감소시키기 위해 시행한 것은? | 1에서와 같이 개도높이 (openness height)의 조절이 가능한 연직수문을 대상으로 실시하였다. 연직수문은 4 mm의 steel 재질로 제작하였으며, 하단부는 예연위어 형식으로 처리하여 위어 월류에 따른 흐름 저항을 감소시켰다. 실험장치는 수로와 유량공급부로 저류조, 펌프가 있으며 실험수로는 유량조절조, 모형수로, 하류 집수정으로 구성되었다. |
Brush, L. and Wolman, M. 1960. Knickpoint behavior in noncohesive material: a laboratory study. Bulletin of the Geological Society of America, Vol. 71, pp. 59-71.
Cantelli, A., Paola, C. and Parker, G. 2004. Experiments on upstreammigrating erosional narrowing and widening of an incisional channel caused by dam removal. Water Resources Research, Vol. 40, No. 3.
Chang, H.H., Harrison, H.H., Lee, W., and Tu, S. 1996. Numerical modeling for sediment-pass-through reservoirs. Journal of Hydraulic Engineering, American Society of Civil Engineers, Vol. 122, No. 7, pp. 381-388.
Ham, H. B. 2007. Data Analysis and SAS Programming, Vol. 328. (in Korean)
Jang, C.L. 2012. 2-Dimensional numerical simulation of the behaviors of knickpoint in the channel with noncohesive materials. Journal of Korean Society of Hazard Mitigation, Vol. 12, No. 6, pp. 259-265. (in Korean)
Jang, C.L. and Kim, G.J. 2017. Numerical simulation of sediment pass-through from Gongju weir. KSCE 2017 convention, pp. 105-106. (in Korean)
Jang, C.L., Im, G.S. and Hwang, M.H. 2011. Technology of flushing sediment for sedimentation reduction in reservoir. Magazine of Korea Water Resources Association, Vol. 44. No. 11, pp. 45-49. (in Korean)
Jeong, S.I. and Lee, S.O. 2016. Experimental study for flushing of sediment bypass pipe underneath rubber weir. Journal of the Korean Society of Safety, Vol. 31, No. 5, pp. 133-140. (in Korean)
Kim, D.G. and Park, W.S. 2012. Sediment flushing analysis in a reservoir by using 3 dimensional hydrodynamic simulation. Journal of Construction and Environment Research Institute, Vol. 7, No. 7, pp. 12-22. (in Korean)
Kim, J.G. 2006. The variation of flow characteristics by installing improved movable weir in a river. Master's dissertation, University of Incheon, Incheon, Republic of Korea. (in Korean)
Kim, J.H. 2007. The study on the bed change simulation depend on moveable weir establishment, Kunsan National University, Kunsan, Republic of Korea. (in Korean)
Lee, K.S., Jang, C.L., Son, K.I. and Hwang, M.H. 2013. Numerical analysis of the sediment pass-through from the Sangju weir and the Gumi weir by using CCHE2D. Journal of Korean Society on Water Environment, Vol. 29, No, 6, pp. 813-82.4 (in Korean)
Stein, O.R. and Julien, P.Y. 1993. Criterion delineating the mode of headcut migration. Journal of hydraulic engineering, Vol. 119, No. 1, pp. 37-50.
Vasquez, J.A., Millar, R.G. and Steffler, P.M. 2005. Two-dimensional morphological simulation in transcritical flow. In Proceedings of the 4th IAHR Symposium on River, Coastal and Estuarine Morphodynamics, RCEM. pp. 253-258.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.