최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Composites research = 복합재료, v.31 no.6, 2018년, pp.429 - 434
윤상영 (Department of Mechanical System Engineering, Chonbuk National University) , 권일범 (Center for Safety Measurement, Korea Research Institute of Standard and Science) , 유효선 (Department of Mechanical System Engineering, Chonbuk National University) , 김은호 (Automotive Hi-Technology Research Center and LANL-CBNU Engineering Institute-Korea, Chonbuk National University & Department of Mechanical System Engineering, Chonbuk National University)
We investigate strain transmissions of a surface bonded distributed optical fiber sensor considering strain variation according to positions. We first derive a strain transmission ratio depending on a wavelength of a strain distribution of the host structure from an analysis model. The strain transm...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
분포형 광섬유 센서는 어떤 장점이 있는가? | 최근에는 특정 위치의 변형률만 측정하는 FBG 형태의 광섬유 센서와 달리 긴 광섬유 전체를 이용하여 광범위한 영역의 변형률을 측정하는 분포형 광섬유 센서에 대한 연구 가 많은 관심을 받고 있다[5]. 분포형 광섬유 센서는 구조물의 넓은 부분에 부착 혹은 삽입되어 넓은 영역의 변형률 분포를 한번에 파악할 수 있는 장점이 있다. 이 경우 센서를 보호하기 위해 특정 부분을 패키징하는 방법보다는 코 팅을 하는 방법이 더 용이하다. | |
광섬유 센서의 쉽게 깨지는 취약성을 보완하기 위해 어떤 방법들이 사용되는가? | 일반적인 광섬유 센서는 탄성물질인실리카 유리로 만들어 졌기 때문에 외부변형 및 온도에 선 형으로 반응하는 성질을 가지고 있다[9,10]. 하지만 이러한광섬유 센서는 쉽게 깨지는 취약성으로 인해 센서를 보호 하기 위해 패키징(packaging)을 하거나 광섬유에 보호 코팅을 하는 방법들이 사용되고 있다[11,12]. 또한, 패키징과 코팅은 센서에 전달되는 변형률을 감소시켜 구조물의 변형률 신호를 왜곡시킬 가능성이 있어 센서의 부착 위치의 변형률을 정확하게 파악하기 위해서는 패키징과 접착제에 따 른 변형률 전달률을 파악할 필요가 있다. | |
광섬유 센서의 패키징과 코팅은 어떤 문제점을 야기할 수 있는가? | 하지만 이러한광섬유 센서는 쉽게 깨지는 취약성으로 인해 센서를 보호 하기 위해 패키징(packaging)을 하거나 광섬유에 보호 코팅을 하는 방법들이 사용되고 있다[11,12]. 또한, 패키징과 코팅은 센서에 전달되는 변형률을 감소시켜 구조물의 변형률 신호를 왜곡시킬 가능성이 있어 센서의 부착 위치의 변형률을 정확하게 파악하기 위해서는 패키징과 접착제에 따 른 변형률 전달률을 파악할 필요가 있다. 이를 위해 패키징된 광섬유 센서에 전달되는 변형률 전달률에 대한 다양한 해석적/실험적 연구가 진행되어왔다[11-16]. |
Meo, M., Polimeno, U., and Zumpano, G., "Detecting Damage in Composite Material Using Nonlinear Elastic Wave Spectroscopy Methods," Journal of Composite Materials, Vol. 15, No. 3, 2008, pp. 115-126.
Ansari, F., and Yuan, L., "Mechanics of Bond and Interface Shear Transfer in Optical fiber Sensors," Journal of Engineering Mechanicss, Vol. 124, No. 4, 1998, pp. 385-394.
Lau, K.T., Yuan, L., Zhou, L.M., Wu, J., and Woo, C.H., "Strain Monitoring in FRP Laminates and Concrete Beams Using FBG Sensors," Journal of Composite Structures, Vol. 51, No. 1, 2001, pp. 9-20.
Takeda, N., and Minakuchi, S., "Optical Fiber Sensor Based Life Cycling Monitoring and Quality Assessment of Carbon Fiber Reinforced Polymer Matrix Composite Structures," Journal of SPIE : Optical Fiber Sensors Conference, Vol. 10323, 2017, pp. 1032315.1-4.
Choi, B.-H., and Kwon, I.-B., "Strain Pattern Detection of Composite Cylinders Using Optical Fibers after Low Velocity Impacts," Journal of Composites Science and Technology, Vol. 154, No. 18, 2018, pp. 64-75.
Ryu, C.Y., Park, J.W., Kwon, I.B., Hong, C.S., and Kim, C.G., "Detection of Matrix Cracking in Composite Laminates Using an Optical Fiber Sensor," Journal of the Korean Society for Composite Materials, Vol. 9, No. 1, 1996, pp. 27-40.
Bang, H.-J., Kang, H.-K., Hong, C.-S., and Kim, C.-G., "Simultaneous Sensing of Failure and Strain in Composites Using Optical Fiber Sensors," Journal of the Korean Society for Composite Materials, Vol. 14, No. 5, 2001, pp. 12-19.
Maaskant, R., Alavie, T., Measures, R.M., Tadros, G., Rizkalla, S.H., and Guhathakurta, A., "Fiber-optic Bragg Grating Sensors for Bridge Monitoring," Journal of Cement and Concrete Composites, Vol. 19, 1997, pp. 21-33.
Di Sante, R., "Fibre Optic Sensors for Structural Health Monitoring of Aircraft Composite Structures: Recent Advances and Applications," Journal of Sensors, Vol. 15, No. 8, 2015, pp. 18666-18713.
Im, J., Kim, M., Choi, K.-S., Hwang, T.-K., and Kwon, I.-B., "Aluminum-thin-film Packaged Fiber Bragg Grating Proves for Monitoring the Maximum Tensile Strain of Composite Materials," Journal of Applied Optics, Vol. 53, No. 17, 2014, pp. 3615-6320.
Kim, S.-W., Kim, E.H., Jeong, M.-S., and Lee, I., "Damage Evaluation and Strain Monitoring for Composite Cylinders Using Tin-coated FBG Sensors under Low-velocity Impacts," Composites Part B, Vol. 74, 2015, pp. 13-22.
Kim, S.W., Jeong, M.S., Lee, I., Kim, E.H., Kwon, I.B., and Hwang, T.K., "Determination of the Maximum Stresses Experienced by Composite Structures Using Metal Coated Optical Fiber Sensors," Journal of Composites Science and Technology, Vol. 78, 2013, pp. 48-55.
Cho, S.-I., Yoo, S.-J., Kim, E.H., Lee, I., Kwon, I.-B., and Yoon, D.-J., "Strain Transmission Characteristics of Packaged Fiber Bragg Grating Sensors for Structural Health Monitoring," Journal of the Korean Society for Nondestructive Testing, Vol. 30, No. 3, 2006, pp. 236-243.
Cho S.-I., Yoo, S.-J., Kim, E.H., Kim, S.-W., Lee, I., Park, K.-C., and Kwon, I.-B., "Effects of Bonding Layer Characteristics on Strain Transmission and Bond Fatigue Performance," Journal of Adhesion Science and Technology, Vol. 26, 2012, pp.1325-1339.
Her, S.C., and Huang, C.Y., "Effect of Coating on the Strain Transfer of Optical Fiber Sensors," Journal of Sensors, Vol. 11, No. 7, 2011, pp. 6926-6941.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.