최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기韓國地盤工學會論文集 = Journal of the Korean geotechnical society, v.34 no.3, 2018년, pp.43 - 56
홍영호 (고려대학교 건축사회환경공학부) , 이종섭 (고려대학교 건축사회환경공학부) , 이동수 (고려대학교 건축사회환경공학부) , 채광석 (GS건설 기술본부 인프라해양연구팀) , 유정동 (고려대학교 건축사회환경공학부)
Vertical cutoff walls such as steel pipe sheet piles (SPSPs) have been commonly applied for the construction of the offshore waste landfill site. Because the SPSPs are sequentially installed by connecting their joints to those of adjacent piles, their mechanical stability should be ensured against t...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
해상처분장의 호안구조물 및 연직차수공으로 주로 사용되는것은 무엇인가? | 해상처분장의 호안구조물 및 연직차수공으로 강관시트파일이 주로 사용되며, 강관시트파일은 이음부를 연결하여 주열식으로 설치가 되는 만큼 해상 고유의 횡방향 외력에 대한 구조적인 안정성이 확보되어야 한다. 본 연구의 목적은 새로 개발된 연직차수공 이음부의 구조적인 성능을 평가하는 것이다. | |
해상처분장 내부의 보유수가 외해로 누출될 경우 해양환경에 직접적인 영향을 줄 수있어 방지하기위한 어떤 기술이 요구되는가? | 해상처분장 내부의 보유수가 외해로 누출될 경우 해양환경에 직접적인 영향을 줄 수 있으므로 이를 방지하기 위한 고도의 차수기술이 요구된다. 해상처분장은 저면에 점토층이 깊게 위치한 지반을 기본 입지조건으로 하며, 연직방향으로는 케이슨 블록이나 강관시트파일 등의 연직차수공을 설치하여 차수기능을 갖추고 있다. | |
해상처분장의 연직차수공으로는 주로 강관시트파일이 사용되고있다. 강관시트파일이란 무엇인가? | 해상처분장의 연직차수공으로는 주로 강관시트파일(Steel Pipe Sheet Pile: SPSP)이 사용되고 있다. 강관시트파일이란 이음부가 설치된 강관파일을 주열식으로 서로 연결하고, 이음부에는 그라우트 등의 차수재를 충진하여 원형, 사각형 등의 임의의 형태의 폐쇄단면을 구축함으로써 일련의 차수벽체를 구성하는 기초 구조물이다(Kimura et al., 2007). |
Ministry of Environment (2016), Municipal Waste Generation and Treatment, Keco2016-pe10-24, 1257p (in Korean).
Abrams, D. A. (1924), "Tests of Impure Waters for Mixing Concrete", ACI Journal Proceedings, Vol.20, No.2, pp.442-486.
ACI 357R (1984), Guide for the design and construction of fixed offshore concrete structures, 23p.
ASTM Standard C 39/C 39M-12 (2012), Standard test method for compressive strength of cylindrical concrete specimens, ASTM, West Conshohocken, PA, USA, 7p.
Chae, K. S., Inazumi, S., Lim, D. S., and Seo, D. W. (2016), "Study on Structural Performance for Joints of Vertical Cutoff Walls in Offshore Waste Landfill (Part 1, Compression characteristics)", Proceedings of the 2016 Fall Conference on the Korean Society of Coastal and Ocean Engineers, Jeju, pp.1-4 (in Korean).
Endo, K. (2017), "Present Situation and Stabilization Technique of Seashore Landfills in Japan", 2017 Special Seminar on Offshore Confined Waste Disposal Facilities, Seoul, pp.27-46.
Inazumi, S., Kimura, M., Too, A.J.K., and Kamon, M. (2005), "Performance of H-jointed Steel Pipe Sheet Piles with H-H Joint in Vertical Hydraulic Cutoff Walls", Proceedings of the 16th International Conference on Soil Mechanics and Geotechnical Engineering, ISSMGE, Vol.4, pp.2269-2272.
Inazumi, S., Isobe, K., Kimura, M., and Mitsuda Y. (2009), "Evaluation of Mechanical Characteristics of Joint Section in Steel Pipe Sheet Piles and Development of 3D-frame Structural Analysis on Design of SPSP Foundations", Journal of Japan Society of Civil Engineers, Vol.65, No.2, pp.532-543 (in Japanese).
Inazumi, S., Kimura, M., Nishiyama, Y., and Kojima, K. (2010), "Leachate Control Technology Using H-jointed Steel Pipe Sheet Piles with H-H Joints at Coastal Landfills", Journal of Environmental Science and Engineering, Vol.4, No.11, pp.65-70.
Inazumi, S., Kimura, M., Kakuda, T., and Kobayashi, M. (2011), "Water Cut-off Performance of H-jointed Steel Pipe Sheet Piles with H-H Joints Attaching Water-swelling Materials", Soils and Foundations, Vol.51, No.6, pp.1019-1035.
Japanese Association for Steel Pipe Piles (1999), Steel Pipe Sheet Pile Foundations - Design and Construction, Japanese Association for Steel Pipe Piles (in Japanese).
Japan Road Association (2002), Reference for Highway Bridge Design Specifications for Highway Bridges: Part IV; Substructures, Japan Road Association (in Japanese).
Katayama, T., Morikawa, T., Yoshida, A., and Hirata, T. (1994), "Experimental Study on High Strength Joint of Steel Pipe Sheet Pile Foundation", Proceedings of the 46th JSCE Annual Meeting, pp.1018-1019 (in Japanese).
Kimura, M., Inazumi, S., Too, J. K. A., Isobe, K., Mitsuda, Y., and Nishiyama, Y. (2007), "Development and Application of H-joint Steel Pipe Sheet Piles in Construction of Foundations for Structures", Soils and Foundations, Vol.47, No.2, pp.237-251.
Kwon, O. S., Oh, M. H., and Chae, K. S. (2012), Technical manual for design, construction and maintenance of controlled type coastal wastes disposal site, CIR Publishing, 225p (in Korean).
Okubo, H., Nishizawa, S., and Mitani, Y. (2002), "Construction and Structural Characteristics of Steel Pipe Sheet Pile Composite Foundation Method for Large-scale Bridge", Kawasaki Steel Giho, Vol.34, No.4, pp.175-181 (in Japanese).
Onda, K., Yokomaku, K., and Okubo, H. (2006), "Development of New Foundation Method Using Steel Pipe Sheet Pile with High Strength Pipe-Junction Hyper-Well SP", JFE technical report, Vol.8, pp.44-50.
Yoon, E.S., Lee, T.W., and Park, S.B. (2005), "An Experimental Study on the Mechanical Properties and Seawater-resistance of Concrete as Using Cement Type", Journal of the Korean Society of Civil Engineers, Vol.25, No.5a, pp.931-937.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.