최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.17 no.2, 2018년, pp.103 - 108
배명일 (충남대학교 기계.재료공학교육과)
In interrupted cutting, the workpiece has a groove that impacts both the cutting tool and the workpiece. Therefore, cutting tool damage occurs rapidly. In this study, I performed interrupted cutting of carbon steel for machine structures (SM20C) using an uncoated carbide tool (SNMG120404, P20), and ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
절삭력의 변화는 어떤 문제점은 발생시키는가? | 하지만 단속절삭에서는 공작물의 가지고 있는 홈에 의하여 절삭 가공시 공구와 공작물은 접촉과 분리를 반복 하게 되고 이로 인하여 절삭력이 주기적으로 변화 하게 된다. 이러한 절삭력의 변화는 단속절삭 가공시 절삭공구의 파손원인을 제공하며 절삭력의 증가와 단속 절삭된 절삭 가공면의 표면 거칠기를 증가시키고 있다.[3-6] | |
단속절삭의 특징은 무엇인가? | 연속절삭에서는 공구와 공작물이 절삭가공을 위하여 접촉한 순간부터 공구와 공작물에 작용하는 힘의 변화가 발생하지 않으며 그렇기 때문에 절삭력의 변화가 발생하지 않는다. 하지만 단속절삭에서는 공작물의 가지고 있는 홈에 의하여 절삭 가공시 공구와 공작물은 접촉과 분리를 반복 하게 되고 이로 인하여 절삭력이 주기적으로 변화 하게 된다. 이러한 절삭력의 변화는 단속절삭 가공시 절삭공구의 파손원인을 제공하며 절삭력의 증가와 단속 절삭된 절삭 가공면의 표면 거칠기를 증가시키고 있다. |
Rhie, Y. S., Lee, D. S., "Determination of the Cutting Condition and Prediction of the Surface Roughness When Turning Die Steel(STD11) with Ceramic Tool" J. Korean Soc. of Material Technology., Vol. 14, No. 4, pp. 11-17, 2012.
Shin, K. H., Lee, G. J., "A Study on the Effects of Cutting Resistance and Surface Roughness of the Machine Structure Carbon Steel in Turning" J. Korean Soc. of Material Technology., Vol. 8, pp. 47-53, 1999.
Vitor Augusto A. De Godoy etc., "Turning of interrupted and continuous hardened steel surface using ceramic and CBN cutting tools", J. Material Processing Technology., Vol. 211, issue. 6, pp. 1014-1025, 2011.
Radu Pavel etc., "Effect of tool wear on surface finish for a case of continuous and interrupted hard turning", J. Material Processing Technology., 170, issues. 1-2, pp. 341-349, 2005.
Lee, B. C., I. S., etc., "Machinability Evaluation of Interrupted Cutting in SCM420 Steel by Using Coated and Uncoated Tool", Korean Soc. Manuf. Process Eng. proceeding 2004, pp. 82-87, 2004.
Kim, D. W., Cho, Y. J. etc., "Wear of Partially Coated Tool in Interrupted Cutting", Korean Soc. Manuf. Process Eng. proceeding 1995, pp. 67-72, 1995.
Bae, M. I., Rhie, Y. S., "Surface Roughness Prediction of Interrupted Cutting in SM45C Using Coated Tool" J. Korean Soc. Manuf. Process Eng., Vol. 13, No. 3, pp. 77-82, 2014.
Bae, M. I., Rhie, Y. S., "Regression Equation Deduction for Cutting Force Prediction When Interrupted Cutting of Carbon Steel for Machine Structure(SM45C)" J. Korean Soc. Manuf. Process Eng., Vol. 15, No. 4, pp. 40-45, 2016.
Rhie, Y. S., Bae, M. I., "Surface Roughness Prediction of Interrupted Cutting in SM20C" J. Korean Soc. of Material Technology., Vol. 16, No. 6, pp. 2021-2026, 2014.
Rhie, Y. S., Bae, M. I., "A Study on the Cutting Force of Carbon Steel for a Machine Structure(SM20C)" J. Korean Soc. of Material Technology., Vol. 18, No. 4, pp. 503-510, 2016.
S. H. Park., "Modern Design of Experiments", Ming Young Sa, pp. 423-496, 1996.
Bae, M. I., "Cutting Face Observation of Interrupted Cutting Workpiece" Korean Soc. Manuf. Process Eng. proceeding Spring Conference, pp. 82, 2015.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.