최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국지열에너지학회논문집 = Transactions of the Korea Society of Geothermal Energy Engineers, v.14 no.4, 2018년, pp.20 - 26
함정균 (조선대학교 대학원) , 김민준 (한국냉동공조인증센터) , 안성국 (삼일산업) , 조홍현 (조선대학교 기계공학과)
In this study, the performance characteristics of a welded plate heat exchanger was investigated experimentally. Performance tests were carried out according to the flow rate and inlet temperature of working fluid. As a result, the heat transfer capacity increased by 335.5 kW with an increasing the ...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
Shell and Tube 열교환기가 널리 사용되는 이유는 무엇인가? | 열교환기는 폐열회수, 냉각, 가열, 응축 등의 열교환을 목적으로 발전소, 석유화학산업, 선박, 건물 냉동조 등에 널리 사용되고 있다. 그 중 Shell and Tube 열교환기는 단순한 구조와 높은 사용압력, 낮은 압력강하를 가져 산업 전반에 사용되고 있다. 하지만 상대적으로 작은 전열면적을 갖기 때문에 부피가 크고, 낮은 열전달 계수와 성능을 가지는 등 단점이 있다. | |
판형열교환기의 종류는 무엇이 있는가? | 판형열교환기는 주름진 주기적 형태을 갖는 전열판을 적층시킨 열교환기로 적층방법에 따른 가스켓, 브레이링, 용접형 판형열교환기로 구분된다. 그 중 용접형 판형열교환기는 가스켓 및 브레이징 판형열교환기에 비해 높은 사용압력을 가지며 사용온도 및 작동유체의 부식성에 대해 보다 자유롭기 때문에 Shell&Tube 열교환기의 대안으로 평가받고 있다[1]. | |
판형열교환기의 성능이 유체의 채널별 유입성에 영향을 받는 이유는 무엇인가? | 또한 일반적으로 판형열교환기의 성능은 전열판의 기하학적 형상과 유체의 열용량에 의해 결정되지만 그 외 유체의 채널별 유입성에도 영향을 받는다. 전열판을 적층하여 제작되는 판형열교환기는 얇은 전열판에 의해 채널이 형성되기 때문에 유체의 유입속도, 유입각도 및 유입비에 따라 영향을 받는다. 이에 본 연구에서는 용접식 판형열교환기의 성능 특성에 대해 실험적으로 조사를 연구를 수행하였으며 열 분야 산업계에 적용할 수 있는 용접식 판형열교환기 개발을 위한 참고 자료로 제시하고자 한다. |
Luan, H. B., Kuang, J. P., Cao, Z., Wu, Z., Tao, W. Q., and Sunden, B., 2017, CFD analysis of two types of welded plate heat exchangers. Numerical Heat Transfer, Part A: Applications, Vol. 71, No. 3, pp. 250-269.
Khan, T. S., Khan, M. S., Chyu, M. C., and Ayub, Z. H,. 2010, Experimental investigation of single phase convective heat transfer coefficient in a corrugated plate heat exchanger for multiple plate configurations. Applied Thermal Engineering, Vol. 30, No. 8-9, pp. 1058-1065.
Yang, J., Jacobi, A., and Liu, W., 2017, Heat transfer correlations for single-phase flow in plate heat exchangers based on experimental data. Applied Thermal Engineering, Vol. 113, pp. 1547-1557.
Chung, H. J., Kang, H., Kim, Y. C., Lee, K. J., Lee, D. K., Lee, W. H., and Shine, W. S., 2018, An Experimental Study on the Heat Transfer and Pressure Drop Characteristics of Ethylene-Glycol Water in a Plate Heat Exchanger, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 30, No. 8, pp. 358-365.
Muley, A., and Manglik, R. M., 2000, Enhanced thermal-hydraulic performance optimization of chevron plate heat exchangers. International Journal of Heat Exchangers, Vol. 1, No. 1 pp. 3-18.
Ahn, H. J., Lee, S. H., Hur, N. K., Park, H. J., and Ryu, H. S., 2010. A numerical simulation of flow and heat transfer in a dimple-type plate heat exchanger. Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 22, No. 3, pp. 149-155.
Luan, Z. J., Zhang, G. M., Tian, M. C., and Fan, M. X., 2008. Flow resistance and heat transfer characteristics of a new-type plate heat exchanger. Journal of Hydrodynamics, Vol. 20, No. 4, pp. 524-529.
Zhang, Y., Jiang, C., Yang, Z., Zhang, Y., and Bai, B., 2016. Numerical study on heat transfer enhancement in capsule type plate heat exchangers. Applied Thermal Engineering, Vol. 108, pp. 1237-1242.
Kumar, B., and Singh, S. N., 2017, Study of pressure drop in single pass U-type plate heat exchanger. Experimental Thermal and Fluid Science, Vol. 87, pp. 40-49.
Zhicheng, Y., Lijun, W., Zhaokuo, Y., and Haowen, L., 2017. Shape optimization of welded plate heat exchangers based on grey correlation theory. Applied Thermal Engineering, Vol. 123, pp. 761-769.
ANSI/AHRI Standard 401(SI), Performance Rating of Liquid to Liquid Heat Exchanger, 2015.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.