최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of KIBIM = 한국BIM학회논문집, v.8 no.1, 2018년, pp.43 - 55
함남혁 (한양대학교 건축환경공학과) , 안병주 (전주대학교 건축공학과) , 김재준 (한양대학교, 건축공학과)
Recently, there have been increasing studies on the application of digital technology, which has its focus of the irregular building. However, most of these studies have not clarified the objective of the technology and the effectiveness of professional manpower on its performance. This study analyz...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
도착 간격시간이란? | 대기행렬시스템에서 고객의 도착과 도착 사이의 시간을 도착 간격시간(interarrival times)이라고 하며, 고객의 도착에 따른 자료가 충분히 수집될 경우 단위시간당 평균 도착고객 수를 추정할 수 있다. 이것을 평균도착률(mean arrival rate)이라고 하며,로 표시한다. | |
대기행렬 이론이란? | 대기행렬 이론(Queuing Theory)은 다양한 형태의 기다림에 대한 연구로서, 현실에 나타나는 다양한 형태의 대기행렬 시스템(Queuing systems)을 대기행렬 모형(Queuing models)을 이용하여 표현한다(Frederick and Mark, 2010). 고객(Customer)은 서비스를 받기 위해 개별적으로 랜덤하게 대기행렬 시스템에 도착한다. | |
대기행렬시스템에서 서버의 수에 따른 분류는? | 기본 대기행렬시스템에서 각 고객은 1명의 서버로부터 개별적으로 서비스를 받는다. 서버의 수에 따라 단일서버시스템과 복수서버시스템으로 나뉜다. 한 명의 고객이 서비스를 받기 시작하는 순간부터 서비스가 완료되는 순간까지의 시간을 서비스 시간(service time)이라고 한다. |
Arora, S. K., Foley, R. W., Youtie, J., Shapira, P., Wiek, A. (2014). Drivers of technology adoption d the case of nanomaterials in building construction. Technol. Forecast. Soc. Change 87, pp. 232-244.
Azhar, S., Hein, M., Sketo, B. (2008). Building Information Modeling (BIM): Benefits, Risks and Challenges, in: T. Sulbaran (Ed.), International Proceedings of the 44th Annual Conference. McWhorter School of Building Science, Auburn University, Auburn, Alabama, USA.
Bernolak, I. (1997). Effective measurement and successful elements of company product ivity : the bas is of competitiveness and world prosperity, International Journal of Production Economics. 52(1-2), pp. 203-213.
bimSCORE. (2011). bimSCORE.
Bryan, W. F., Robert, M. L., David, R. R. (2013). Project Impacts of Specialty Mechanical Contractor Design Involvement in the Health Care Industry: Comparative Case Study, Journal of Construction Engineering and Management, 139(9), pp. 1091-1097.
Buswell, R. A., Thorpe, A., Soar, R. C., Gibb, A. G. F. (2008). Design, data and process issues for mega-scale rapid manufacturing machines used for construction. Automation in Construction, 17(8), pp. 923-929.
Chen, D., Heyer, S., Ibbotson, S., Salonitis, K., Steingrimsson, J.G., Thiede, S. (2015). Direct digital manufacturing: definition, evolution, and sustainability implications. J. Clean. Prod. 107, pp. 615-625.
Dozzi, S., AbouRizk, S. (1993). Productivity in Construction, in: National Research Council (Ed.) Ottawa, Canada.
Dunn, N. (2012). Digital Fabrication in Architecture. Laurence King Publishing Ltd, London, United Kingdom.
Frederick S., Mark S. (2010). Introduction to Management Science, A Modeling and Case Studies Approach with Spreadsheets, 4th Edition, McGrawHill, Chapter 11.
Giel, B. K., Issa, R. R. A., Olbina, S. (2010). Return on Investment Analysis of Building Information Modeling in Construction, in: W. Tizani (Ed.), The International Conference on Computing in Civil and Building Engineering (ICCCBE), Nottingham University Press, Nottingham, UK, pp. 153-158.
Gil, N., Tommelein, D., Kirkendall, R. L., Ballard, G. (2001). Leveraging specialty-contractor knowledge in design-build organizations, Engineering, Construction and Architectural Management 8, 5/6, pp. 355-367.
Gramazio, F., Kohler, M. (2008). Digital materiality in architecture. Lars Muller Publishers, Baden, Switzerland.
Gramazio, F., Kohler, M., Langenberg, S. (2014). FABRICATE: Negotiating Design & Making. gta Verlag, Zurich, Switzerland.
Halligan, D., Brown, J., Demsetz, L., Pace, C. (1994). Action-response model and loss of productivity in construction, Journal of Construction Engineering and Management. 120(1), pp. 47-64.
Ham, N. H., Kim, J. J. (2015). A Case Study on BIM Operating and Performance Measurement in Construction Phase, Journal of KIBIM, 5(2), pp. 1-11.
Indiana University Architect's Office. (2009). IU BIM Proficiency Matrix, Indiana University Architect's Office.
Isolda, A. J., Florian, M., Norman, H., Timothy, W., Guillaume, H. (2017). Potential benefits of digital fabrication for complex structures: Environmental assessment of a robotically fabricated concrete wall, Journal of Cleaner Production. 154(2017), pp. 330-340.
Jang, S. J., Lee, G. (2016). Analysis of Technical Requirement for Implementation of Multi-trade Prefabrication, Conference of the Korean Institute of Building Construction, the Korean Institute of Building Construction, 16(1), pp. 113-114.
Jeong, K., Cho, H., Don, T. (2008). Integration of queueing network and IDEF3 for business process analysis, Business Process Management Journal, 14(4), pp. 471-482.
Jones, S. A. (2013). Global Industry Trends with Building Information Modeling (BIM). Construction Innovation 2013 Forum, McGraw_Hill
Jung, S. C. (2014). An Analysis of the Conceptualization, Representation and Implementation Process of Major Free-form Buildings in South Korea Since Year 2000, Master's Thesis. Yonsei University.
Kim, D. Y., Shim, C. S., Lee, B. J. (2014). Reverse engineering of facilities using laser scanning, KIBIM Annual Conference, 2014 May 23; Seoul, Korea. Seoul (Korea): Korean Institute of Building Information Modeling, 2014, pp. 23-24.
Kim, E. J., Kim, J. H., Huh, Y. K. (2016). A Case Study on Practical Uses of BIM in Building Construction, Journal of the Architectural Inst i tute of Korea Structure & Construction, 32(12), pp. 69-75.
Kim, H. J., Yoo, M. Y., Kim, J. J., Choi, C. S. (2017). Performance Analysis of BIM Labor using Case Analysis, Journal of KIBIM, 7(3), pp. 31-39.
Kim, S. J. (2017). Construction method of 3D interior and exterior panel using CNC T-BAR, Korea Intellectual Property Rights Information Service, 1017624190000 (2017.07.21).
Kim, S. J., Park, S. J., Ryu, H. G. (2015). Review of reverse design process for freeform envelope using 3D scanning, Conference of the Korean Institute of Building Construction; 2015 May 28-29; Yeosu, Korea, Seoul (Korea) : the Korean Institute of Building Construction, 2015, pp.17-18.
Kim, S., Chin, S., Han, J., Choi, C. (2017). Measurement of Construction BIM Value Based on a Case Study of a Large-Scale Building Project. Journal of Management in Engineering, 33(6), 05017005-1-05017005-10
Kloft, H. (2009). Fabricating architecture(selected readings in digital design and manufacturing). New York: Rinceton Architectural Press, p.111.
Koh, S. H., Ham, N. H., Lee, J. S., Yoon, S. W., Kim, J. J. (2017). Comparison Analysis of BIM Level in the Domestic and Overseas BIM Projects - Focused on BIM Journals and Award Winning Projects, Journal of KIBIM, 7(2), pp. 25-35.
Lawrence,P.(1997). Workflow handbook, John Wiley & Sons, Inc. New York, NY, USA ${(c)}$ 1997 table of contents ISBN:0-471-96947-8
Lee, G., Park, K., Won, J. (2012). D3 City project - Economic impact of BIM-assisted design validation. Automation in Construction, 22, pp. 577-586.
Little, J. D. C. (1961). A proof of the queuing formula: L ${\lambda}W$ . Oper. Res. 9(3), pp. 383-387.
McCuen, T, Suermann, M. P. (2007). The Interactive Capability Maturity Model and 2007 AIA TAP BIM Award Winners, 33.
Mortenson. (2014). Prefabrication: Benefits & Drivers for Successful Implementation. Prefabrication Research Study Results. M. Rosenquist and B. Gregor.
Poirier, E., Staub-French, S., Forgues, D. (2015). Measuring the impact of BIM on labor productivity in a small specialty contracting enterprise through action-research, Automation in Construction 58 (2015) pp. 74-84.
Ryu, H. G. (2013). 3D Digital Design Optimization Process Considering Constructability of Freeform Structure, Korean Journal of Construction Engineering and Management, KICEM, 14(5), pp. 35-43.
Skanska. (2011). Prefabrication Case Study, Miami Valley Hospital. 2011 NYC Healthcare Symposium
Son, J., Kim, J., Kim, M. (2005). Extracting the workflow critical path from the extended well-formed workflow schema, Journal of Computer and Systems Sciences, 70(1), pp. 86-106.
Truong, N. K. V., Choi, Y., Kim, I., Shin, S., Hwang, W. J. (2010). A Probabilistic Approach to Workflow Time Analysis for Business Process Management, International Journal of Human and Social Sciences, 5(12), pp. 811-815.
Won, J. S., Lee, J. J., Lee, G. (2008). A Case Study On BIM Collaboration and Information Management Methods, Journal of the Architectural Institute of Korea Planning & Design, 24(8), pp. 25-32.
Zhuge, H., Cheung, T., Pung, H. (2001). A timed workflow process model, The Journal of Systems and Software, 55(3), pp. 231-243.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.