최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기韓國染色加工學會誌 = Textile coloration and finishing, v.30 no.2, 2018년, pp.98 - 106
심지현 (다이텍연구원) , 유성훈 (다이텍연구원) , 이종혁 (다이텍연구원) , 김근수 ((주)티포엘) , 천진성 ((주)티포엘) , 박성민 (다이텍연구원)
In this study, graphene oxide(GO) was synthesized by using Hummer's method. Then, GO was used as a additive for epoxy resin nanocomposites that were prepared by mixing Tetraglycidyl diamino diphenyl methane(TGDDM) and hardner(MDEA+M-MIPA). Thermal and mechanical properties of epoxy resin nanocomposi...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
에폭시 수지란? | 에폭시 수지는 가장 일반적인 열경화성 수지로 발열·경화 반응에 의해 3차원의 가교결합 네트워크 구조를 갖는 형태를 가진다1,2). 에폭시 수지는 뛰어난 접착성, 내화학성, 내열성 및 기계적 특성 때문에 자동차, 우주·항공, 건설 및 전자산업과 같은 다양한 산업 분야에서 사용되고 있다3,4). | |
나노 복합재료 제조 시, GO 사이의 응집현상이 발생하지 않도록 하는 것이 중요한 이유는? | GO의 질량분율 증가에 따라 나노복합재료의 특성이 저하되게 되는 것이며, GO는 고분자 사슬에 비해 강직성이 높기 때문에 파괴나 인장응력에 안정적이지 못하고 나노복합재료의 구조자체가 파괴되는 결과를 초래하게 된다. 특히 GO의 경우 carbon nanotube(CNT)나 타입자에 비해 높은 부피비를 가지기 때문에 고분자 사슬 내에 소량의 입자만으로도 높은 부피를 보유하게 된다(0.1wt. | |
에폭시 수지의 특징은? | 에폭시 수지는 가장 일반적인 열경화성 수지로 발열·경화 반응에 의해 3차원의 가교결합 네트워크 구조를 갖는 형태를 가진다1,2). 에폭시 수지는 뛰어난 접착성, 내화학성, 내열성 및 기계적 특성 때문에 자동차, 우주·항공, 건설 및 전자산업과 같은 다양한 산업 분야에서 사용되고 있다3,4). 또한 novolac, phenoxy수지 및 고무와 비슷한 구조를 지닌 에폭시 수지 등 기능성을 위해 구조가 변환된 수지도 요구되고 있을 뿐만 아니라, 에폭시 수지의 특성을 향상시키기 위하여 탄소나노튜브 및 그래핀과 같은 필러들이 사용되고 있는 실정이다. |
N. Tian, R. Ning, and J. Kong, Self-Toughening of Epoxy Resin Through Controlling Topology of Cross-Linked Networks, Polymer, 99(2), 376(2016).
B. Demir, K. M. Beggs, B. L. Fox, and L. Servinis, A Predictive Model of Interfacial Interactions Between Functionalised Carbon Fibre Surfaces Cross-Linkedwith Epoxy Resin, Composites Science and Technology, 159(3), 127(2018).
X. Wang and Q. Zhang, Thermal Stability of Some Naphthalene- and Phenyl-Based Epoxy Resins, Polymer Degradation and Stability, 40(2), 385(2004).
S. Park, F. Jin, J. Lee, and W. F. Su, Thermal and Mechanical Properties of Tetrafunctional Epoxy Resin Toughened with Epoxidized Soybean Oil, Materials Science and Engineering: A, 374(2), 109(2004).
Y. Geng, S. J. Wang, and J. Kim, Preparation of Graphite Nanoplatelets and Graphene Sheets, J. of Colloid and Interface Science, 336(2), 592(2009).
S. Adam, E. H. Hwang, E. Rossi, and S. D. Sarma, Theory of Charged Impurity Scattering in Two-Dimensional Graphene, Solid State Communications, 149, 1072(2009).
Z. Li, J. Chu, C. Yang, S. Hao, and R. J. Young, Effect of Functional Groups on the Agglomeration of Graphene in Nanocomposites, Composites Science and Technology, 163(28), 116(2018).
S. Wang, H. Sun, H. M. Ang, andM. O. Tade, Adsorptive Remediation of Environmental Pollutants Using Novel Graphene-Based Nanomaterials, Chemical Engineering J., 226(15), 336(2013).
N. Tian, R. Ning, and J. Kong, Self-Assembly of Three-Dimensional Interconnected Graphene-Based Aerogels and Its Application in Supercapacitors, J. of Colloid and Interface Science, 407(1), 416(2013).
S. I. Abdullah and M. N. M. Ansari, Mechanical Properties of Graphene Oxide(Go)/Epoxy Composites, Hbrc. J., 11(2), 151(2015).
C. Teng, C. M. Ma, C. Lu, S. Yang, and T. Lee, Thermal Conductivity and Structure of Non-Covalent Functionalized Graphene/Epoxy Composites, Carbon, 49(15), 5107(2011).
R. Muzyka, M. Kwoka, Ł. Sm?dowski, N. Diez, and G. Gryglewicz, Oxidation of Graphite by Different Modified Hummers Methods, New CarbonMaterials, 32(1), 15(2017).
N. I. Zaaba, K. L. Foo, U. Hashim, S. J. Tan, and C. H. Voon, Synthesis of Graphene Oxide Using Modified Hummers Method: Solvent Influence, Procedia Engineering, 184, 469(2017).
Y. Chen, B. Dang, C. Jin, B. Chen, and Y. Nie, Bio-Inspired Layered Nanolignocellulose/Graphene-Oxide Composite with High Mechanical Strength Due To Borate Cross-Linking, Industrial Crops and Products, 118, 65(2018).
N. P. Hung, W. Zhou, E. T. Peh, andC. S. Chan, Fracture Toughness and Low Cycle Fatigue of 6061/A12O3P Composites, Composites Engineering, 5(5), 509(1995).
O. Li, X. Wang, H. Chen, J. Hu, and G. Gou, Influence of Heat Treatment on the Strength and Fracture Toughness of 7N01 Aluminum Alloy, J. of Alloys and Compounds, 678, 160(2016).
R. Aradhana, S. Mohanty, and S. K. Nayak, Comparison of Mechanical, Electrical and Thermal Properties in Graphene Oxide and Reduced Graphene Oxide Filled Epoxy Nanocomposite Adhesives, Polymer, 141, 109 (2018).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.