최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Elastomers and composites = 엘라스토머 및 콤포지트, v.53 no.2, 2018년, pp.80 - 85
Hwang, Young-Bea (R&D Team, Nexen Corp.) , Lee, Won-Ki (Dept. of Polymer Engineering, Pukyong National University) , Park, Chan Young (Dept. of Polymer Engineering, Pukyong National University)
Chloro isobutylene isoprene rubber (CIIR) and ethylene propylene diene monomer (EPDM) compounded with other formulation chemicals, depending on the polymer blend, were prepared by mechanical mixing. After manufacturing the rubber vulcanizate by compression molding with a hot press, the mechanical an...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
D. Stamenkovic and M. Milosevic, "Friction at rubber metal spring", Proceedings of 11th International Conference on Tribology, Belgrade, Serbia, 215 (2009).
M. S. Khan, R. Franke, U. Gohs, D. Lehmann, and G. Heinrich, "Friction and wear behaviour of electron beam modified PTFE Filled EPDM compounds", Wear, 266, 175 (2009).
N. S. M. El-Tayeb and R. Md Nasir, "Effect of soft carbon black on tribology of deproteinised and polyisoprene rubbers", Wear, 262, 350 (2007).
D. Felhos and J. Karger-Kocsis, "Tribological testing of peroxide cured EPDM rubbers with different carbon black contents under dry sliding conditions against steel", Tribol. Int., 41, 404 (2008).
S. Q. Lai, T. S. Li, X. J. Liu, and R. G. Lv, "A study on the friction and wear behavior of PTFE filled with acid treated nano-attapulgite", Macromol. Mater. Eng., 289, 916 (2004).
Y. P. Wu, Y. Ma, Y. Q. Wang, and L. Q. Zhang, "Effects of characteristics of rubber, mixing and vulcanization on the structure and properties of rubber/clay nanocomposites by melt blending", Macromol. Mater. Eng., 289, 890 (2004).
S. Kalpakjian and S. R. Schmid, "Manufacturing Processes for Engineering Materials", Pearson, New York, 250 (2007).
A. Mukhopadhyay and S. Nihar, "Performance appraisal of a rubber-metal spring", J. Technol. Plast., 39, 29 (2014).
A. Mukhopadhyay, "Flow behavior of 'EPDM' rubber during dry compression", J. Manuf. Sci. Prod., 14, 115 (2014).
A. Mukhopadhyay, "Effect of some lubricants on the flow characteristics of EPDM rubber under compressive load", J. Manuf. Sci. Prod., 13, 1 (2013).
K. Subulan, A. S. Tasan, and A. Baykasoglu, "Designing an environmentally conscious tire closed-loop supply chain net- work with multiple recovery options using interactive fuzzy goal programming", Appl. Math. Modell., 39, 2661 (2015).
J. D. Martinez, N. Puy, R. Murillo, T. Garcia, M. V. Navarro, and A. M. Mastral, "Waste tyre pyrolysis-a review", Renew. Sustain. Energy Rev., 23, 179 (2013).
T. Amari, N. J. Themelis, and I. K. Wernick, "Resource recovery from used rubber tires", Resour. Policy, 25, 179 (1999).
C. Roy, A. Chaala, and H. Darmstadt, "The vacuum pyrolysis of used tires: End uses for oil and carbon black products", J. Anal. Appl. Pyrol., 51, 201 (1999).
B. Acevedo, A. M. Fernandez, and C. Barriocanal, "Identification of polymers in waste tyre reinforcing fibre by thermal analysis and pyrolysis", J. Anal. Appl. Pyrol., 111, 224 (2015).
Technical brochure, "Introduction to Chlorobutyl", Exxon Corporation, 268 (1987).
V. Duchacek and A. J. Kuta, "Long-time sulfenamide-accelerated sulfur vulcanization of natural rubber/chlorobutyl rubber compounds", J. Appl. Polym. Sci., 32, 4849 (1986).
Technical brochure, "Halobutyl Compounding for Pharmaceutical Applications", Exxon Corporation, 167 (1987).
M. Morton, "Rubber technology", Germany: Springer; 183 (1999).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.