최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of power electronics, v.18 no.4, 2018년, pp.965 - 974
Ye, Manyuan (School of Electrical and Automation Engineering, East China Jiaotong University) , Song, Pinggang (School of Electrical and Automation Engineering, East China Jiaotong University) , Li, Song (School of Electrical and Automation Engineering, East China Jiaotong University) , Xiao, Yunhuang (School of Electrical and Automation Engineering, East China Jiaotong University)
A new zero-voltage-switching (ZVS) push-pull pulse-width modulation (PWM) converter is proposed in this paper. The wide ZVS condition for all of the switches is obtained by utilizing the energy stored in the output inductor and magnetizing inductance. As a result, the switching losses can be dramati...
J. Wang, F. Z. Peng, J. Anderson, A. Joseph, and R. Buffenbarger, "Low cost fuel cell converter system for residential power generation," IEEE Trans. Power Electron., Vol. 19, No. 5, pp. 1315-1322, Sep. 2004.
X. Pan and A. K. Rathore, "Naturally clamped zero-current commutated soft-switching current-fed push-pull DC/DC converter: analysis, design, and experimental results," IEEE Trans. Power Electron., Vol. 33, No. 3, pp. 1318-1327, Mar. 2015.
M. Dasand and V. Agarwal, "Design and analysis of a high-efficiency dc-dc converter with soft switching capability for renewable energy applications requiring high voltage gain" IEEE Trans. Ind. Electron., Vol. 63, No. 5, pp. 2936-2944, May 2016.
S. Ohtsu, T. Yamashita, K. Yamamoto, and T. Sugiura, "Stability in high-output-voltage push-pull current-fed converters," IEEE Trans. Power Electron., Vol. 8, No. 2, pp. 135-139, Apr. 1993.
M. J. Ryan, W. E. Brumsickle, D. M. Divan, and R. D. Lorenz, "A new ZVS LCL-resonant push-pull DC-DC converter topology," IEEE Trans. Ind. Appl., Vol. 34, No. 5, pp. 1164-1174, Sep. 1998.
W. Chen, Z. Y. Lu, X. F. Zhang, and S. S. Ye, "A novel ZVS step-up push-pull type isolated LLC series resonant DC-DC converter for UPS systems and its topology variations," in Proc. IEEE Appl. Power Electron. Conf. (APEC), pp. 1073-1078, 2008.
A. Bilsalam, I. Boonyaroonate, and V. Chunkag, "Highvoltage gain zero-current switching push-pull resonant converter for small energy sources," IET Power Electron., Vol. 9, No. 4, pp. 835-845, Mar. 2016.
C. l. Chu and C. h. Li, "Analysis and design of a currentfed zero-voltage-switching and zero-current-switching CL-resonant push-pull dc/dc converter," IET Power Electron., Vol. 2, No. 4, pp. 456-465, 2009.
Y. H. Kim, S. C. Shin, J. H. Lee, Y. C. Jung, and C. Y. Won, "Soft switching current-fed push-pull converter for 250-W AC module applications," IEEE Trans. Power Electron., Vol. 29, No. 2, pp. 863-872, Feb.2014.
K. R. Sree and A. K. Rathore, "Impulse commutated zerocurrent switching current-fed push-pull converter: Analysis, design, and experimental results," IEEE Trans. Ind. Electron., Vol. 62, No. 1, pp. 363-370, Jan. 2015.
J.-M. Kwon, E.-H. Kim, B.-H. Kwon, and K.-H. Nam, "High-efficient fuel cell power conditioning system with input current ripple reduction," IEEE Trans. Ind. Electron., Vol. 56, No. 3, pp. 826-834, Mar. 2009.
Q. Wu, Q. Wang, J. Xu, and L. Xiao, "Implementation of an active-clamped current-fed push-pull converter employing parallel-inductor to extend ZVS range for fuel cell application," IEEE Trans. Ind. Electron., Vol. 64, No. 10, pp. 7919-7928, Oct. 2017.
M. Mohr and F.-W. Fuchs, "Voltage fed and current fed full bridge converter for the use in three phase grid connected fuel cell systems," in Proc. IEEE Int. Power Electron. Motion Control Conf., pp. 1-7, 2006.
L. Zhu, K. Wang, F. C. Lee, and J.-S. Lai, "New start-up schemes for isolated full-bridge boost converters," IEEE Trans. Power Electron., Vol. 18, No. 4, pp. 946-951, Jul. 2003.
T. C. Lim, B. W. Williams, S. J. Finney, H. B. Zhang, and C. Croser, "Energy recovery snubber circuit for a dc-dc push-pull converter," IET Trans. Power Electron., Vol. 5, No. 6, pp. 863-872, Jul. 2012.
B. Whitaker, D. Martin, and E. Cilio, "Extending the operational limits of the push-pull converter with SiC devices and an active energy recovery clamp circuit," in Proc. IEEE Appl. Power Electron. Conf. (APEC), pp. 2023-2038, 2015.
Q. Wu, Q. Wang, J. Xu, and L. Xiao, "A wide load range ZVS push-pull DC/DC converter with active clamped," IEEE Trans. Power Electron., Vol. 32, No. 4, pp. 2865-2875, Apr. 2017.
T.-F. Wu, J.-C. Hung, J.-T. Tsai, C.-T. Tsai, and Y.-M. Chen, "An active-clamp push-pull converter for battery sourcing applications," IEEE Trans. Ind. Appl., Vol. 44, No. 1, pp. 196-204, Jan./Feb. 2008.
Z. Chen, Q. Wu, and Y Yuan, "A novel zero-voltage-switching push-pull high-frequency-link single-phase inverter," IEEE J. Emerg. Sel. Topics Power Electron., Vol. 4, No. 2, pp. 421-434, Jun. 2016.
Y. Yuan and Q. Wu, "One zero-voltage-switching three-transistor push-pull converter," IET Power Electron., Vol. 6, No. 7, pp. 1270-1278, Aug. 2013.
Z. Wang and H. Li, "A soft switching three-phase currentfed bidirectional DC-DC converter with high efficiency over a wide input voltage range," IEEE Trans. Power Electron., Vol. 27, No. 2, pp. 669-684, Feb. 2012.
W. G. Hurley and W. H. Wolfle, Transformers and Inductors for Power Electronics Theory, Design and Applications, John Wiley & Sons Ltd. Publication, 2013.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
저자가 APC(Article Processing Charge)를 지불한 논문에 한하여 자유로운 이용이 가능한, hybrid 저널에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.