최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국압력기기공학회 논문집 = Transactions of the Korean Society of Pressure Vessels and Piping, v.14 no.1, 2018년, pp.15 - 23
사인진 (한국원자력연구원 고온가스로개발부) , 황종배 (충남대학교 신소재공학과) , 김응선 (한국원자력연구원 고온가스로개발부)
A compact heat exchanger is one of critical components in a very high temperature gas-cooled reactor (VHTR). Alloy 617 (Ni-Cr-Co-Mo) is considered as one of leading candidates for this application due to its excellent thermal stability and strengths in anticipated operating conditions. On the basis ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
모재 Alloy 617에서 온도에 따른 여유도의 차이가 생기는 이유는 무엇인가? | 모재 Alloy 617의 경우, 저온영역에서 여유도가 크나, 고온영역에서는 여유도가 줄어든다고 보고된바있다.(21,22) 이러한 차이는 인장결과가 최대 1223 K(950 oC)의 데이터를 이용하여 피팅을 수행하였기 때문으로 보이며, 보다 높은 온도 범위의 인장실험결과를 통해 개선이 요구된다. 유사하게, 모재Alloy 617의 평균인장강도도 저온영역에서 여유도가 크나, 고온영역에서 여유도가 줄어든다고 보고된바 있으나,(21,22) 확산용접재는 취약한 접합계면미세조직으로 인하여 모든 실험 온도 범위에서 여유도가 크지 않은 것을 볼 수 있다. | |
초고온가스로 대량 생산을 목표로 하는 것은 무엇인가? | 차세대원자로 노형 중 하나인 초고온가스로(VHTR; very high temperature gas-cooled reactor)는 850 oC/70 기압 이상의 조건에서 생산된 고온의 열을 이용하여 일차 에너지원인 전기의 효율적인 생산과 이차 에너지원인 수소의 대량 생산을 목표로 한다.(1-3) 원자로 노심에서 생산된 고온의 열은 냉각재인 헬륨 기체(helium gas)를 이용하여 2차 계통으로 전달된다. | |
원자로 노심에서 생산된 고온의 열은 어디로 전달되는가? | 차세대원자로 노형 중 하나인 초고온가스로(VHTR; very high temperature gas-cooled reactor)는 850 oC/70 기압 이상의 조건에서 생산된 고온의 열을 이용하여 일차 에너지원인 전기의 효율적인 생산과 이차 에너지원인 수소의 대량 생산을 목표로 한다.(1-3) 원자로 노심에서 생산된 고온의 열은 냉각재인 헬륨 기체(helium gas)를 이용하여 2차 계통으로 전달된다. 이때, 기체 냉각재의 효율적인 열전달을 위해 우수한 건전성이 확보된 중간열교환기 (IHX; intermediate heat exchanger)의 설계 및 제작 기술 개발이 요구된다. |
Locatelli, G., Mancini, M., and Todeschini, N., 2013, "Generation IV Nuclear Reactors: Current Status and Future Prospects," Energ. Policy, Vol. 61, pp. 1503-1520.
Song, K.-N., Hong, S.-D., and Park, H.-Y., 2012, "High-Temperature Structural Analysis on the Small-Scale PHE Prototype under the Test Condition of Small-Scale Gas Loop," Transactions of the Korean Society of Pressure Vessel and Piping, Vol. 8, No.1, pp. 1-7 (in Korean).
Song, K.-N., Hong, S.-D., and Park, H.-Y., 2012, "High-Temperature Structural Analysis on the Medium-Scale PHE Prototype under the Test Condition of Small-Scale Gas Loop," Transactions of the Korean Society of Pressure Vessel and Piping, Vol. 8, No.1, pp. 33-38 (in Korean).
Takeda, T., Kunitomi, K., Horie, T., and Iwata, K., 1997, "Feasibility Study on the Applicability of a Diffusion-Welded Compact Intermediate Heat Exchanger to Next-Generation High Temperature Gas-Cooled Reactor," Nucl. Eng. Des., Vol. 168, pp. 11-21.
Clark, D. E., Mizia, R. E., Glazoff, M. V., Sabharwall, P., and McKellar, M. G., 2012, "Diffusion Welding of Alloys for Molten Salt Service-Status Report," INL/EXT-12-24589 Rev. 1, Idaho National Laboratory.
Nestell, J., and Sham, T.-L., 2015, "ASME Code Consideration for the Compact Heat Exchanger," ORNL/TM-2015/401, Oak Ridge National Laboratory.
Miwa, Y., Noishiki, K., Suzuki, T., and Takatsuki, K., 2013, "Manufacturing Technology of Diffusion-Bonded Compact Heat Exchanger (DCHE)," Kobelco Technology Review, No. 32, pp. 51-56.
Sah, I., Hwang, J.-B, Hong, S.-I., Kim, E.-S., and Kim, M.-H., 2017, "Effect of Heat Treatment on the Diffusion-Bonded Ni-Base Alloy Hastelloy X," Korean J. Met. Mater., Vol. 55, No. 2, pp. 114-123 (in Korean).
Sah, I., Kim, D., Lee, H. J., and Jang, C., 2013, "The Recovery of Tensile Ductility in Diffusion-Bonded Ni-Base Alloys by Post-Bond Heat Treatments," Mater. Design, Vol. 47, pp. 581-589.
Totemeier, T. C., Tian, H., Clark, D. E., and Simpson, J. A., 2005, "Microstructure and Strength Characteristics of Alloy 617 Welds," INL/EXT-05-00488, Idaho National Laboratory.
Basuki, W. W., Kraft, O., and Aktaa, J., 2012, "Optimization of Solid-State Diffusion Bonding of Hastelloy C-22 for Micro Heat Exchanger Applications by Coupling of Experiments and Simulations," Mat. Sci. Eng. A-Struct., Vol. 538, pp. 340-348.
Mizia, R. E., Clark, D. E., Glazoff, M. V., Lister, T. E., and Trowbridge, T. L., 2013, "Optimizing the Diffusion Welding Process for Alloy 800H: Thermodynamic, Diffusion Modeling, and Experimental Work," Metall. Mater. Trans. A, Vol. 44A, pp. S154-S161.
Suzumura, A., Onzawa, T., and Tamura, H., 1983, "Solid State Diffusion Weldability of High Temperature Alloy A286 and Hastelloy X," Transactions of the Japan Welding Society, Vol. 14, No. 2, pp. 26-32.
Ravisankar, B., Krishnamoorthi, J., Ramakrishnan, S. S., and Angelo, P. C., 2009, "Diffusion Bonding of SU 263," J. Mater. Process. Tech., Vol. 209, pp. 2135-2144.
Song, C. H., Yoon, S. H., and Choi, J. S., 2015, "A Study of Diffusion Bonding Process for High Temperature and High Pressure Micro Channel Heat Exchanger using Inconel 617," Korean J. Air-Cond. Refrig. Eng., Vol. 27, No. 2, pp. 87-93 (in Korean).
Wright, J. K., 2015, "Draft ASME Boiler and Pressure Vessel Code Case for Use of Alloy 617 for Class A Elevated Temperature Service Construction," INL/EXT-15-36305, Idaho National Laboratory.
Sham, T.-L., Eno, D. R., and Jensen, K. P., 2008, "Treatment of High Temperature Tensile Data for Alloy 617 and Alloy 230," Proceedings of PVP2008, Chicago, July 27-31, PVP2008-61128.
ASME Section VIII Code Case 2621-1, 2015 Edition.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.