최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국생산제조학회지 = Journal of the Korean Society of Manufacturing Technology Engineers, v.27 no.1, 2018년, pp.1 - 6
문인용 (Department of Mechanical Engineering, Soongsil University) , 정도관 (School of Robot and Automation Engineering, Dongyang Mirae University) , 김보현 (Department of Mechanical Engineering, Soongsil University)
Moving block electrode discharge grinding (MBEDG) is one of the electrical discharge machining (EDM) processes that have been used to fabricate micro tool electrodes. Usually, wire electrode discharge grinding is preferred among the tool fabrication methods; however, it is not easy to control wire t...
Lee, E. Y., Choi, W. K., Yoo, J. H., 2017, Cutting Condition Optimization of Micro Hole for Single Crystal Silicon, J. Korean Soc. Precis. Eng. 34:8 551-555.
Kim, T. G., Shin, K., Kim, H. Y., Lee, S. W., 2017, Analysis of CFRP Routing Machined Surface Using Cutting Temperature Signal, J. Korean Soc. Precis. Eng. 34:10 671-675.
Jeong, H. J., Byun, J. H., Cheng, D. J., Oh, Y. J., Kim, S. J., 2017, The Comparison of Response Surface and Discharge Energy Methods in Predicting MRR and Roughness of Sink EDM, J. Korean Soc. Manuf. Technol. Eng. 26:5 466-471.
Rahman, M., Asad, A. B. M. A., Masaki, T., Saleh, T., Wong, Y. S., Senthil Kumar, A., 2010, A Multiprocess Machine Tool for Compound Micromachining, International Journal of Machine Tools and Manufacture 50:4 344-356.
Mohri, N., Tani, T., 2006, Micro-Pin Electrodes Formation by Micro-Scanning EDM Process, CIRP Annals - Manufacturing Technology 55:1 175-178.
Masuzawa, T., Fujino, M., Kobayashi, K., Suzuki, T., Kinoshita, N., 1985, Wire Electro-Discharge Grinding for Micro-Machining, CIRP Annals - Manufacturing Technology 34:1 431-434.
Kim, B. H., Park, B. J., Chu, C. N., 2006, Fabrication of Multiple Electrodes by Reverse EDM and Their Application in Micro ECM, Journal of Micromechanics and Microengineering 16:4 843-850.
Yamazaki, M., Suzuki, T., 2004, EDM of Micro Rods by Self-Drilled Holes, Journal of Materials Processing Technology 149:1 134-138.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.