최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국안전학회지 = Journal of the Korean Society of Safety, v.33 no.3, 2018년, pp.8 - 14
허인강 (충남대학교 기계공학과) , 김재훈 (충남대학교 기계공학과)
Ni-base superalloy has excellent resistance to extreme environments such as high temperatures and high stresses and are used as materials for large gas turbines. In this paper, the specimens were taken from the blade that were used for a long time, and their life span was studied by microstructure a...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
Ni기 초내열합금의 주요 성분과 그 특성은? | 따라서 대형 가스터빈의 블레이드 소재는 Ni 초내열 합금이 사용된다. Ni기 초내열합금은 주요 성분으로 Ni을 함유하고 있고, 많은 양의 크롬을 함유하고 있으며 이는 내산화성을 증가시킨다. 또한, 소량의 알루미늄, 티타늄, 나이오 비움, 몰디브덴이 강도와 내부식성을 증가시키기 위해 첨가된다. | |
저주기피로 손상에 의한 피로 수명을 예측하기 위해 사용한 방법에는 어떤 것이 있는가? | 특히 저주기피로에 대한 손상은 전체 손상의 약 1/3을 차지하고 있다2). 이렇게 저주기피로 손상에 의한 피로 수명을 예측하기 위해 유재환3)은 저주기피로시험의 변형률 파형을 변화에 따른 피로수명을 예측하였으며, 양호영외4)는 가스터빈 노즐부에 사용되는 Co기 초내열합금의 피로수명을 Cofffin - Manson법과변형률 에너지법을 통해 예측하였다. 그 외에도 연성소모법, Ostergren법을 이용한 피로수명예측에 대한 연구가 이루어지고 있다5). | |
대형 가스터빈의 블레이드 소재로 Ni 초내열 합금을 사용하는 이유는? | 발전용 대형 가스터빈은 고온에서 운영되고 있으며 가스터빈의 효율을 증대를 위해 가스터빈 입구의 온도를 높이고 있다. 이렇게 높은 하중과 고온 등과 같이 가혹한 조건에서 운용되는 가스터빈은 고온강도, 부식과 산화에 대한 저항성이 요구된다. 따라서 대형 가스터빈의 블레이드 소재는 Ni 초내열 합금이 사용된다. |
C. T. Sims and W. C. Hagel, John Wiley and Sons, Superalloy II. New York, 1987.
J. C. Runkle and R. M. Pellous, Fatigue Mechanisms, ASTM STP 675, 1978.
J. H. Yoo, "A Study of Strain Waveform Effect on Fatigue Life in High Temperature Low Cycle Fatigue Test", J. Korean Soc. Saf., Vol. 14, No. 1, pp. 41-48, 1999.
H. Y. Yang, J. H. Kim, J. S. Ha, K. B. Yoo and G. C. Lee, "Low Cycle Fatigue Behavior of Cobalt-Base Superalloy ECY768 at Elevated Temperature", J. Korean Soc. Saf., Vol. 28, No. 3, pp. 18-22, 2013.
S. P. Zhu, H. Z., Huang, H. Li, R. Sun and M. J. Zuo, "A New Ductility Exhaustion Model for High Temperature Low Cycle Fatigue Life Prediction of Turbine Disk Alloys", International Journal of Turbo and Jet Engines, Vol. 28, No. 2, pp. 119-131, 2011.
S. H. Yang, M.. Y. Kim, S. Y. Park and S. H. Kim, "Effect of Heat Treatment on Microstructure and Mechanical Properties of the Nickel Base Superalloy GTD111DS", Journal of the Korean Society for Precision Engineering, Vol. 26, No. 3, pp.19-24, 2009.
J. Y. Kim, D. H. Yoon, J. H., Kim, S. Y. Bae, S. Y. Chang and S, H. Chang, "Life Prediction of Low Cycle Fatigue for Ni-base Superalloy GTD 111 DS at Elevated Temperature", Transations of the Korean Society of Mechanical Engineers A, Vol. 41, No. 8, pp.765-770, 2017.
L. J. Chen, P. K. Liaw, Y. H. He, M. L. Benson, J. W. Blust, P. F. Browning and D. L. Klarstrom, "Tensile Hold low-cycle Fatigue Behavior of Cobalt-based $HAYNES^{(R)}$ 188 superalloy", Scripta materialia, Vol. 44, No. 6, pp. 859-865, 2001.
B. H. Choe, J. H. Lee, H. M. Kim and H. C. Lee, "Low Cycle Fatigue Properties of Polycrystalline and Directionally Ssolidified CM247LC Superalloy", Korean Journal of Metals and Material Vol. 29, No. 6, pp. 618-625, 1991.
J. A. Bannantine, J. J. Comer and J. L. Handrock, "Fundamentals of Metal Fatigue Analysis", Englewood Cliffs, NJ: Prentice-Hall, 1990.
D. Hollander, D. Kulawinski, A. Weidner, M. Thiele, H. Biermann and U. Gampe, "Small-scale Specimen Testing for Fatigue Life Assessment of Service-exposed Industrial Gas Turbine Blades", International Journal of Fatigue, Vol. 92, pp.262-271, 2016.
J. Reuchet and L. Remy, "High Temperature Low Cycle Fatigue of MAR-M 509 Superalloy I: The Influence of Temperature on the Low Cycle Fatigue Behaviour from 20 to $1100^{\circ}C$ ", Materials Science and Engineering A, Vol. 58 pp. 19-32, 1983.
M. Reger and L. Remy, "High Temperature, Low Cycle Fatigue of IN-100 Superalloy I: Influence of Temperature on the Low Cycle Fatigue Behaviour", Materials Science and Engineering A, Vol. 101 pp. 47-54, 1988.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.