$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

마이크로 강섬유 혼입-라텍스 개질 콘크리트의 역학성능과 내구성능 실험
Experimental Study on Mechanical and Durability Characteristics of Latex Modified Concrete with Micro Steel Fibers

콘크리트학회논문집 = Journal of the Korea Concrete Institute, v.30 no.3, 2018년, pp.325 - 332  

손민경 (숭실대학교 건축학부) ,  최경규 (숭실대학교 건축학부)

초록
AI-Helper 아이콘AI-Helper

본 연구에서는 비정질 강섬유와 일반강섬유를 혼입한 라텍스 개질 콘크리트의 역학성능과 내구성능을 규명하기 위하여 KS 및 ASTM 방법을 이용해 실험을 수행하였다. 압축강도 실험결과 높은 마이크로 강섬유의 혼입율은 압축강도의 조기 강도 발현에 기여하는 것으로 나타났고, 휨강도 실험결과 최대강도 이후 상대적으로 연성거동이 확인되었다. 마이크로 강섬유를 부피비로 0.3 % 혼입한 라텍스 개질 콘크리트의 구속 건조수축 실험결과, 최대 균열폭은 0.19 mm로 현행 콘크리트설계기준의 허용값을 만족한다. 내구성능 규명을 위해 수밀성능과 동결융해저항성 실험을 수행하였고 수밀성능 실험결과 KS F 4042에 제시된 기준값을 만족하였고 동결융해저항성능 실험 시 내구성 저하는 발견되지 않았다.

Abstract AI-Helper 아이콘AI-Helper

In this study, latex modified concrete with amorphous and conventional micro steel fibers was tested using five different test methods of KS and ASTM to investigate the mechanical and durability characteristics. Based on the test results, the mechanical characteristics of compression strength, flexu...

주제어

참고문헌 (26)

  1. ACI 224R-01 (2001) Control of Cracking in Concrete Structures (Repproved 2008). ACI Committee 224. 

  2. ASTM C 1581-04 (2004) Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and concrete under Restrained Shrinkage. ASTM International 

  3. Choi, H. (2010) Shrinkage Cracking Characteristics of Micro Steel Fiber Reinforced corcrete. Master Degree Thesis. Soongsil University. (In Korean) 

  4. Choi, K. K., Truong, G. T., and Choi, S. J. (2015) Restrained shrinkage cracking of amorphous metallic FRC. Proceedings of the Institution of Civil Engineers-Structures and Buildings 168(12), 902-914. 

  5. Choi, S. Y., Choi, Y. S., Heo, H. S., and Yang, E. I. (2014) Effect of Latex and Mineral Additive on Durablity of Remicon LMC. Journal of the Korean Society of Civil Engineers 34(6), 1743-1751. (In Korean) 

  6. Choi, S. Y., Park, J. S., and Jung, W. T. (2011) A Study on the Shrinkage Control of fibers Refinforced Concrete Pavement. The Proceedings of the Twelfth East Asia-Pacific Conference on Structural Engineering and Construction 14, 2815-2822. 

  7. Hong, C. W., Jeong, W. K., Kim, K. J., and Yun, K. K. (2006) Basic Properties of Latex-Modified Concrete Using Fly-ash. Journal of the Korean Society of Civil Engineers 26(1A), 205-211. (In Korean) 

  8. Jeong, W. K., Yun, K. K., Hong, S. H. (2005) Estimation of Air Void System and Permealbility of Latex-Modified Concretes by Image Analysis Method. Journal of the Korea Institute 17(5), 695-702. (In Korean) 

  9. Joo, M. K., Lho, B. C., Choi, J. Y., Choi, K. H., and Choi, J. G. (2009) Penetration Resistance of Ultrarapid-Hardening Polymer-Modified Concrete with fibers. In Fall Conference of the Korea Concrete Institute, 7 November 2009, Dankook University. 269-270. (In Korean) 

  10. Kang, S. H. and Hong, S. G. (2014) Performance of Fresh and Hardened Ultra High Performance Concrete without Heat Treatment. Journal of the Korea Concrete Institute 26(1), 23-24. (In Korean) 

  11. Kim, K. H., Lee, J. M., Hong, C. W., and Yun, K. K. (2001) Permeability and Freeze-Thaw Resistatnce of Latex Modified Concrete. Journal of the Korea Concrete Institute 13(5), 484-490. (In Korean) 

  12. Ku, D. O., Kim, S. D., Kim, H. S., and Choi, K. K. (2014) Flexural Performance Characteristics of Amorphous Steel fibers-Reinforced Concrete. Journal of the Korea Concrete Institute 26(4), 483-489. (In Korean) 

  13. Lee, H. H. and Lee, H. J. (2014) Characteristic strength and deformation of SFRD considering steel fiber factor and volume fraction. Journal of Korea Concrete Institute 16(6), 759-766. (In Korean) 

  14. Lee, H. J., Kim, T. K., Kim, D. H., Kim, S. H., and Yoon, K. K. (2002) Drying Shrinkage Properties of Latex Modified Concrete. Journal of the Korea Concrete Institute 14(3), 151-156. (In Korean) 

  15. Lim, W. Y. and Hong, S. G. (2016) Compressive Behavior of Hybrid Steel fibers Reinforced Ultra-High Performance Concrete. Journal of the Korea Concrete Institute 28(2), 214-221. (In Korean) 

  16. Ministry of Land, Infrastructure, and Transport (2015) Standard Specification of Road Construction. Republic of Korea, Seoul. 

  17. Ministry of Land, Infrastructure, and Transport (2016) Standard Specification of Concrete. Republic of Korea, Seoul. 

  18. Ministry of Land, Transport and Maritime Affairs (2009) Guidelines for Mix Design of Cement Concrete. Republic of Korea, Seoul. 

  19. Ministry of Land, Transport and Maritime Affairs (2012) Road design standards. Republic of Korea, Seoul. 

  20. Ohama, Y. (1995) Handbook of Polymer-Modified Concrete and Mortars Properties and Process, Technology Noyes Publications 

  21. Park, C. K., Lee, J. W., Kim, D. H., and Park, C. K. (2012a) Flexural Strength and Impact Resistance of Latex Modified fibers Reinforced Concrete. In Fall Conference of the Korea Concrete Institute, 7-9 November 2012, Muju-gun: Deogyusan Resort. 29-30. (In Korean) 

  22. Park, C. K., Lee, J. W., Kim, D. H., and Park, C. K. (2012b) Strength Properties of Latex Modified Blended Fiber Reinforced Concrete. In Fall Conference of the Korea Concrete Institute, 7-9 November 2012, Muju-gun: Deogyusan Resort. 31-32. (In Korean) 

  23. Park, J. H. and Kim, Y. G. (2015) Flexural Toughness and Material Properties of Steel fibers Reinforced Very Early Strength Latex Modified Concrete. Journal of the Korean Society of Hazard Mitigation 15(3), 45-52. (In Korean) 

  24. Seoul Transportation Authority (2010) A handbook of Urban Business. Republic of Korea, Seoul. 

  25. Shah, S. P., and Weiss, J. (2006) Quantifying shrinkage cracking in fibers reinforced concrete using the ring test, RILEM Materials and Structures 39, 887-899. 

  26. Yun, K. K., Jeong, W. K., Kim, S. H., and Lee, H. H. (2003) Dry Shrinkage Properties of Latex Modified Concrete with Ordinary Cement and Rapid-Setting Cement. Journal of the Korea Concrete Institute 15(1), 95-101. (In Korean) 

저자의 다른 논문 :

LOADING...
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로