최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국항행학회논문지 = Journal of advanced navigation technology, v.22 no.4 = no.91, 2018년, pp.271 - 278
김민규 (한국항공대학교 항공우주 및 기계공학과) , 명재욱 (한국항공대학교 항공우주 및 기계공학과) , 김정래 (한국항공대학교 항공우주 및 기계공학과)
For ionospheric correction of low earth orbiter (LEO) satellites using single frequency global navigation satellite system (GNSS) receiver, ionospheric scale factor should be applied to the ground-based ionosphere model. The ionospheric scale factor can be calculated by using a NeQuick model, which ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
NeQuick 모델에 대해 설명하시오. | 다만, IRI 모델은 4-5년 주기로 모델 갱신이 필요하다. NeQuick 모델은 사용자 및 GNSS 위성의 위치, 태양 활동, 그리고 시간에 대한 함수로서 사용자와 GNSS 사이의 경로로부터 적분 점을 계산한 후 각 적분 점의 모델 변수 및 전하 밀도를 계산하고, 전하 밀도를 수치 적분하여 전리층 지연값을 출력한다. NeQuick 모델 중에서 NeQuick G 모델은 후처리된 태양 활동 지표를 모델의 입력값으로 사용하지 않고, Galileo 항법위성에서 제공하는 전리층 변수를 사용하기 때문에 실시간으로 전리층 지연의 변환 계수를 계산할 수 있다. | |
지상에서 수신된 SBAS 보정정보를 저궤도위성에서 사용하기 위해 변환계수 계산을 위해 필요한 것은? | 지상에서 수신된 SBAS 보정정보를 저궤도위성에서도 사용하기 위해서는변환계수를 사용하는방법이있다. 변환계수는 지상 환경에서 수신된 신호의 전리층 지연과 저궤도 위성 고도에서 수신된 신호의 전리층 지연의 비율을 나타내는 것으로, 전리층 변환 계수를 계산하기 위해서는 3차원 전리층 분포를 제공하는 모델이 필요하다[3]. 3차원 전리층 분포를 제공하는 모델로 IRI (international reference ionosphere) 모델과 NeQuick 모델이있다. | |
전리층 지연에 대한 보정 방법은 무엇이 있는가? | 저궤도위성은 GNSS L1 단일주파수 수신기를 많이 사용하는데, 단일 주파수를 이용할 경우 전리층에 의한 신호 지연이 발생하기 때문에 전리층 지연 보정이 필요하다. 전리층 지연에 대한 보정 방법으로는 IGS (international GNSS services)에서 제공되는 GIM (global ionosphere map) 데이터 산출물 또는 SBAS(satellite-based augmentation system) 전리층 보정정보를 사용하는 방법이 있다. 하지만 IGS GIM과 SBAS 보정정보는 지상 기반 모델이기 때문에 저궤도위성에 곧바로 적용할 수 없다. |
J. Kim and Y. J. Lee, “Using ionospheric corrections from the space-based augmentation systems for low earth orbiting satellites,” GPS Solutions, Vol. 19, No. 3, pp. 423-431, 2015.
International GNSS Service. IGS Products [Internet]. Available: http://www.igs.org/products.
O. Montenbruck and E. Gill, “Ionospheric correction for GPS tracking of LEO satellites,” Journal of Navigation, Vol. 55, No. 2, pp. 293-304, 2002.
J. Zhong, J. Lei, X. Dou, and X. Yue, “Assessment of vertical TEC mapping functions for space-based GNSS observations,” GPS Solutions, Vol. 20, No. 3, pp. 353-362, 2016.
D. Peng and B. Wu, “The application of GIM in precise orbit determination for LEO satellites with single-frequency GPS measurements,” Chinese Astronomy and Astrophysics, Vol. 36, No. 4, pp. 366-381, 2012.
A. J. Mannucci, B. D. Wilson, D. N. Yuan, C. H. Ho, U. J. Lindqwister, and T. F. Runge, “A global mapping techniques for GPS-derived ionospheric total electron content measurements,” Radio Science, Vol. 33, No. 3, pp. 565-582, 1998.
H. Bock, A. Jaggi, R. Dach, S. Schaer, and G. Beutler, “GPS single-frequency orbit determination for low Earth orbiting satellites,” Advances in Space Research, Vol. 43, No. 5, pp. 783-791, 2009.
X. Yang, J. Li, and S. Zhang, "Ionospheric correction for spaceborne single-frequency GPS based on single layer model." Journal of Earth System Science, Vol. 123, No. 4, pp. 767-778, 2014.
B. Bidaine and R. Warnant, "Ionosphere modelling for Galileo single frequency users: Illustration of the combination of the NeQuick model and GNSS data ingestion. Advances in Space Research, Vol. 47, No. 2, pp. 312-322, 2011.
C. M. Lee, K. D. Park, and S. Lee, "Comparison of real-time ionospheric delay correction models for single-frequency GNSS receivers: Klobuchar model and NeQuick model. Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography, Vol. 28, No. 4, pp. 413-420, 2010.
S. M. Radicella, “The NeQuick model genesis, uses and evolution,” Annals of Geophysics, Vol. 52, No. 3/4, pp. 417-422, 2009.
European Union, European GNSS (Galileo) open service-Ionospheric correction algorithm for Galileo single frequency users, issue 1.2.
A. Leick, GPS Satellite Surveying, 2rd ed. New Jersey, NJ: John Wiley & Sons, 1994.
M. W. Lear, GPS navigation for low-Earth orbiting vehicles, NASA 87-FM-2, JSC-32031, rev. 1, Lyndon B. Johnson Space Center, Houston, Texas.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.