최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기韓國軍事科學技術學會誌 = Journal of the KIMST, v.21 no.4, 2018년, pp.481 - 488
함영훈 (국방기술품질원) , 김준우 (국방기술품질원) , 장호성 (국방기술품질원)
This study suggest the improvement of the CFRP adhesive mixing ratio about acoustic window to enhance SONAR performance. The CFRP of submarine is produced by allocation an acoustic window zone by the beam width of SONAR sensors. During the sea trial, SONAR system's bearing and range accuracy data is...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
소나 돔이 충족해야할 제작 조건은 무엇인가? | 소나는 소나 돔 내에 설치되어 유체 하중과 같이 운항 중 발생할 수 있는 여러가지 요인으로부터 보호된다. 소나 돔은 센서부를 보호할 수 있도록 충분한 강성을 보유하면서 음향학적으로는 음파의 송수신 신호를 저하시키지 않는 재질 및 형상으로 제작된다[1]. 수중함의 경우 함 외부를 둘러싸고 있는 복합재가 수상함의 소나 돔과 같은 역할을 하는데, 자유 충수구역에 위치한 여러 가지 탑재장비 및 센서부 손상을 보호하며 함의 유선형 구조를 만든다. | |
소나체계란 무엇인가? | 수중함에서 소나체계는 표적탐지와 선제공격, 안전한 항해를 위한 필수 장비로 음향신호 탐지센서가 전방위에 설치되어 있다. 소나는 소나 돔 내에 설치되어 유체 하중과 같이 운항 중 발생할 수 있는 여러가지 요인으로부터 보호된다. | |
CFRP 내부박리현상을 막기위해 수지접착제에 배합되어야할 적정 점도제의 비율은 무엇인가? | 반면 기존의 점도제 배합비(10 %)를 적용하였을 경우 경화지연이 발생하여 70시간 이후에도 경화가 되지 않는 것을 확인하였다. 따라서 경화시험을 통해 약 1~2 %의 점도제 배합비가 침전현상 방지 측면에서 적정함을 확인하였다. |
Woo-Jin Jung, et al., "A Study on the Measurement and Analysis Method for the Acoustic Transmission Loss of the Material for the Acoustic Window of Sonar Dome," Transaction of the Korean Society for Noise and Vibration Engineering, Vol. 16, No. 7, pp. 729-738, 2006.
Oh-Heon Kwon and Yu-Seong Yun, "The Effect of Load Orientation for Crack Propagation and Acoustic Emission Evaluation on Plain Woven CFRP," Transactions of the Korean Society of Mechanical Engineers A, Vol. 28, No. 4, pp. 443-452. 2004.
Ku-Kyun Shin, et al., "The Influence of Design Factors of Sonar Acoustic Window on Transfer Function of Self Noise due to Turbulent Boundary Layer," Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 23, No. 1, pp. 61-62, 2013.
Seok-Hwan Ahn, et al., “Strength Evaluation for Adhesive Bonds of Adhesive with FRP Ship Body Structure,” Journal of Advanced Research in Ocean Engineering, Vol. 24, No. 1, pp. 146-147, 2010.
Young-Soo Seo, et al., "A Study on the acoustic Performance Design Technique of Underwater Acoustic Material," Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 23, No. 10, pp. 920-927, 2013.
DIN EN ISO 527-4:1997 Determination of tensile properties- Part 4: Test Conditions for Isotropic and Orthotropic Fibre-Reinforced Plastic Composites.
ASTM D297/D297M-15 Standard Test Methods for Rubber Products-Chemical Analysis.
Kwang-Soo Kim, et al., “Failure Mode and Strength of Unidirectional Composite Single Lap Bonded Joints I. Experiments,” Journal of the Korean Society for Composite Materials, Vol. 17, No. 6, pp. 14-21, 2014.
Kwang-Soo Kim, et al., “Failure Mode and Strength of Unidirectional Composite Single Lap Bonded Joints II. Failure Prediction,” Journal of the Korean Society for Composite Materials, Vol. 18, No. 1, pp. 1-9, 2015.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.