본 연구에서는 국산 참오동나무재의 열처리에 의한 재질특성의 변화를 조사하였다. 비교를 위하여 은사시나무와 소나무재의 열처리 특성을 조사, 검토하였다. 세 공시수종의 목재시험편을 $160^{\circ}C$, $180^{\circ}C$, $200^{\circ}C$ 및 $220^{\circ}C$의 전기로 내에서 2시간 열처리 후, 재색변화($L^*a^*b^*$), 밀도, 중량감소율 및 셀룰로오스의 상대결정화도를 측정하였다. 재색변화 측정결과, 명도($L^*$)는 세 공시수종 목재 모두 $200^{\circ}C$ 이상에서 크게 감소하였다. 참오동나무재와 은사시나무재의 적-녹색도($a^*$)와 황-청색도($b^*$)는 열처리 온도증가에 따른 차이는 거의 없었으나, 소나무재의 $b^*$는 $200^{\circ}C$ 이후 감소하였다. 참오동나무재의 재색변화량(${\Delta}E^*$)은 $160^{\circ}C$ 열처리에서는 거의 없었고 $180^{\circ}C$ 이상에서 크게 나타났으나, 은사시나무와 소나무재는 $160^{\circ}C$에서도 재색변화가 크게 나타났다. 참오동나무재의 밀도는 $160{\sim}180^{\circ}C$ 열처리에서는 거의 변화가 없었고, 중량감소율은 참오동나무재가 가장 크게 나타났다. 열처리온도 증가에 따라 세 수종의 목재의 중량감소율과 상대결정화도는 증가하였으나 밀도는 다소 감소하였다. 결론적으로 참오동나무재는 색변화 온도, 중량감소율 및 상대결정화도 증가량이 비교수종 목재와 다른 특성을 나타났다.
본 연구에서는 국산 참오동나무재의 열처리에 의한 재질특성의 변화를 조사하였다. 비교를 위하여 은사시나무와 소나무재의 열처리 특성을 조사, 검토하였다. 세 공시수종의 목재시험편을 $160^{\circ}C$, $180^{\circ}C$, $200^{\circ}C$ 및 $220^{\circ}C$의 전기로 내에서 2시간 열처리 후, 재색변화($L^*a^*b^*$), 밀도, 중량감소율 및 셀룰로오스의 상대결정화도를 측정하였다. 재색변화 측정결과, 명도($L^*$)는 세 공시수종 목재 모두 $200^{\circ}C$ 이상에서 크게 감소하였다. 참오동나무재와 은사시나무재의 적-녹색도($a^*$)와 황-청색도($b^*$)는 열처리 온도증가에 따른 차이는 거의 없었으나, 소나무재의 $b^*$는 $200^{\circ}C$ 이후 감소하였다. 참오동나무재의 재색변화량(${\Delta}E^*$)은 $160^{\circ}C$ 열처리에서는 거의 없었고 $180^{\circ}C$ 이상에서 크게 나타났으나, 은사시나무와 소나무재는 $160^{\circ}C$에서도 재색변화가 크게 나타났다. 참오동나무재의 밀도는 $160{\sim}180^{\circ}C$ 열처리에서는 거의 변화가 없었고, 중량감소율은 참오동나무재가 가장 크게 나타났다. 열처리온도 증가에 따라 세 수종의 목재의 중량감소율과 상대결정화도는 증가하였으나 밀도는 다소 감소하였다. 결론적으로 참오동나무재는 색변화 온도, 중량감소율 및 상대결정화도 증가량이 비교수종 목재와 다른 특성을 나타났다.
Effects of heat treatment on the characteristics of Royal paulownia (Paulownia tometosa) wood were investigated. The results were compared with those of Suwon silver poplar (Populus tementiglandulosa) and Korean red pine (Pinus densiflora) woods. The wood samples of the three species were treated at...
Effects of heat treatment on the characteristics of Royal paulownia (Paulownia tometosa) wood were investigated. The results were compared with those of Suwon silver poplar (Populus tementiglandulosa) and Korean red pine (Pinus densiflora) woods. The wood samples of the three species were treated at $160^{\circ}C$, $180^{\circ}C$, $200^{\circ}C$ and $220^{\circ}C$ in an electric furnace for 2 hours. The changes of color, density, mass loss, and relative crystallinity were investigated before and after heat treatment. The lightness ($L^*$) decreased rapidly from $200^{\circ}C$ in all species. There were no change in red-green chromaticity($a^*$) and yellow-blue chromaticity($b^*$) of Royal paulownia and poplar woods with increasing temperature. Whereas, yellow-blue chromaticity($b^*$) of Korean red pine wood decreased sharply from $200^{\circ}C$. Royal paulownia wood showed appreciable color change(${\Delta}E^*$) after heat treatment above $180^{\circ}C$. Poplar and pine woods, however, presented significant color change from $160^{\circ}C$. Color change of the three wood species increased rapidly with increasing temperature. Mass loss of the three wood species by heat treatment was the highest in the Royal paulownia wood and the lowest in the pine wood. Mass loss and relative crystallinity increased and density decreased slightly with increasing temperature. Consequently, it is revealed that Royal paulownia wood showed considerable differences in the temperature of color change, weight loss and change of relative crystallinity compared to the other wood species.
Effects of heat treatment on the characteristics of Royal paulownia (Paulownia tometosa) wood were investigated. The results were compared with those of Suwon silver poplar (Populus tementiglandulosa) and Korean red pine (Pinus densiflora) woods. The wood samples of the three species were treated at $160^{\circ}C$, $180^{\circ}C$, $200^{\circ}C$ and $220^{\circ}C$ in an electric furnace for 2 hours. The changes of color, density, mass loss, and relative crystallinity were investigated before and after heat treatment. The lightness ($L^*$) decreased rapidly from $200^{\circ}C$ in all species. There were no change in red-green chromaticity($a^*$) and yellow-blue chromaticity($b^*$) of Royal paulownia and poplar woods with increasing temperature. Whereas, yellow-blue chromaticity($b^*$) of Korean red pine wood decreased sharply from $200^{\circ}C$. Royal paulownia wood showed appreciable color change(${\Delta}E^*$) after heat treatment above $180^{\circ}C$. Poplar and pine woods, however, presented significant color change from $160^{\circ}C$. Color change of the three wood species increased rapidly with increasing temperature. Mass loss of the three wood species by heat treatment was the highest in the Royal paulownia wood and the lowest in the pine wood. Mass loss and relative crystallinity increased and density decreased slightly with increasing temperature. Consequently, it is revealed that Royal paulownia wood showed considerable differences in the temperature of color change, weight loss and change of relative crystallinity compared to the other wood species.
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
제안 방법
The study measured density chance and weight reduction in the three specimens (20mm(R) × 20mm (T) × 40mm (L) by the temperature of heat treatment.
To offer key basic data for the expansion of the usage plan of Royal paulownia woods that have superior added value among tree species grown in Korea, the study examined the color, weight, and density changes as well as the relative crystallinity of cellulose caused by the heat treatment. Furthermore, the study compared and examined the heat treatment properties of Korean red pin wood, a representative Korean tree species as a needleleaf tree wood as well as Suwon silver poplar, one of the broadleaf fast-growing woods.
Using an X-ray diffractometer (D-Max 2100V, Rigaku, Japan), the study analyzed the relative crystallinity of non-treated and treated wood cellulose. Specimens in 1mm(R) × 10mm (T) × 20mm (L) were measured under 40kV, 30mA using monochromatic CuKα-ray with n filter.
이론/모형
Specimens in 1mm(R) × 10mm (T) × 20mm (L) were measured under 40kV, 30mA using monochromatic CuKα-ray with n filter. The calculation of relative crystallinity used the following Segal method (Segal et al., 1959).
The three points of the specimens were measured for color changes (Fig. 2), and the expression of the color change values was based on the CIE-L*a*b* color space measurement by Commission Internationale de I'Eclairage (Han and Cho, 2005).
성능/효과
1. The lightness(L*) of Royal paulownia wood, Suwon silver poplar wood, and Korean red pine wood decreased with the increase in the temperature of the heat treatment. While the red-green chromaticity(a*) and the yellow-blue chromaticity(b*) showed little change with the increase in the heat treatment temperature, the yellow-blue chromaticity(b*) of Korean red pine wood drastically decreased from over 200℃.
2. The density of the wood specimens decreased by about 10% due to the heat treatment at 220℃, and at 160-180℃, there was no density change in Royal paulownia wood. There was the largest weight reduction on Royal paulownia wood, and particularly, from over 180°C, the weight of Royal paulownia wood drastically decreased.
3. The relative crystallinity of all wood specimens showed some increase as the temperature of heat treatment increased, and compared to its nontreated specimen, Royal paulownia wood showed the largest increase in relative crystallinity.
To offer key basic data for the expansion of the usage plan of Royal paulownia woods that have superior added value among tree species grown in Korea, the study examined the color, weight, and density changes as well as the relative crystallinity of cellulose caused by the heat treatment. Furthermore, the study compared and examined the heat treatment properties of Korean red pin wood, a representative Korean tree species as a needleleaf tree wood as well as Suwon silver poplar, one of the broadleaf fast-growing woods.
후속연구
, 2003). And therefore, further review on temperature, duration, and types of tree species would be required.
As such, the study identified the change in color, density, and relative crystallinity on Royal paulownia, Suwon silver poplar and Korean red pine woods, and the data on such changes of the properties would be used as basic data for the application of these woods to practical usage in the wood industry.
참고문헌 (43)
Aydemir, D., Gunduz, G., Ozdenm, S. 2014. The influence of thermal treatment on color response of wood materials. Color Research and Application 37(2): 148-153.
Bekhta, P., Niemz, P. 2003. Effect of high temperature on the change in colour, dimensional stability and mechanical properties of spruce wood. Holzforschung 57(5): 539-546.
Bhuiyan, M.T.R., Hirai, N., Sobue, N. 2000. Changes of crystallinity in wood cellulose by heat treatment under dried and moist conditions. Journal of Wood Science 46(6): 431-436.
Brischke, C., Welzbacher, C.R., Brandt, K., Rapp, A.O. 2007. Quality control of thermally modified timber: Interrelationship between heat treatment intensities and CIE L*a*b* color data on homogenized wood samples. Holzforschung 61: 19-22.
Cho, B.G., Hwang, S.W., Kang, H.Y., Lee, W.H. 2015. Change of dimensional stability of thermally compressed Korean pine (Pinus koraiensis Sieb. et Zucc.) wood by heat treatment. Journal of the Korean Wood Science and Technology 43(4): 470-477.
Gunduz, G., Korkut, S., Aydemir, D., Bekar, I. 2009. The density, compression strength and surface hardness of heat treated hornbeam(Carpinus betulus) wood. Maderas. Ciencia y tecnologia 11(1): 61-70.
Han, E.J., Cho, J.Y. 2005. Color analysis of printed silk with digital textile printing method. Journal of the Korean Society of Design Culture 11(2): 126-134.
Hidayat, W., Jang, J.H., Park, S.H., Febrianto, F., Lee, S.H., Kim, N.H. 2015. Effect of temperature and clamping during heat treatment on physical and mechanical properties of okan (Cylicodiscus gabunensis [Taub.] Harms). BioResources 10(4): 6961-6974.
Hidayat, W., Qi, Y., Jang, J.H., Febrianto, F., Kim, N.H. 2017a. Effect of mechanical restraint on the properties of heat-treated Pinus koraiensis and Paulownia tomentosa woods. BioResources 12(4): 7539-7551.
Hidayat, W., Qi, Y., Jang, J.H., Febrianto, F., Lee, S.H., Kim, N.H. 2016. Effect of treatment duration and clamping on the properties of heat-treated okan wood. BioResources 11(4): 10070-10086.
Hidayat, W., Qi, Y., Jang, J.H., Park, B.H, Banuwa, I.S.B., Febrianto, F., Kim, N.H. 2017b. Color change and consumer preferences towards color of heat-treated korean white pine and royal paulownia woods. Journal of the Korean Wood Science and Technology 45(2): 213-222.
Hirai, N., Sobue, N., Asano, I. 1972. Studies on piezoelectric effect of wood IV. Effects of heat treatment on cellulose crystallilties and piezoelectric effect of wood. Mokuzai Gakkaishi 18: 535-542.
Hong, B.H. 1985. The dynamic mechanical properties of Paulownia coreana used for sounding boards. Journal of the Korean Wood Science and Technology 13(3): 34-40.
Inoue, M., Norimoto, M. 1991. Permanent fixation of compressive deformation in wood by heat treatment. Wood Research and Technical Notes 27: 31-40.
Ishiguri, F., Matsui, M., Andoh, M., Yokota, S., Yoshizawa, N. 2003. Time-course changes of chemical and physical properties in sugi (Cryptomeria japonica D. Don) logs during smoke heating. Wood and Fiber Science 35(4): 585-593.
Kang, C.W., Lim, H.M., Kang, H.Y. 2015. Investigation on the oil heat treatment of domestic utilization species I-The color change of larch and paulownia wood specimens treated at $200^{\circ}C$ . Journal of the Korea Furniture Society 26(2): 138-144.
Kim, K.M., Park, J.H., Park, B.S., Son, D.W., Park, J.S., Kim, W.S., Kim, B.N., Shim, S.R. 2009. Physical and mechanical properties of heat-treated domestic cedar. Journal of the Korean Wood Science and Technology 37(4): 330-339.
Kim, K.M., Park, J.H., Park, B.S., Son, D.W., Park, J.S., Kim, W.S., Kim, B.N., Shim, S.R. 2010. Physical and mechanical properties of heat-treated domestic yellow poplar. Journal of the Korean Wood Science and Technology 38(1): 17-26.
Kim, S.I. 1997. New landscaping tree-Paulownia wood- (Korean). Landscaping tree. 39(7): 18-20.
Kim, Y.S. 2016. Research trend of the heat-treatment of wood for improvement of dimensional stability and resistance to biological degradation. Journal of the Korean Wood Science and Technology 44(3): 457-476.
Kocaefe, D., Poncsak, S., Boluk, Y. 2008. Effect of thermal treatment on the chemical composition and mechanical properties of birch and aspen. BioResources 3(2): 517-537.
Korkut, D.S., Korkut, S., Bekar, I., Budakci, M., Dilik, T., Cakicier, N. 2008. The Effects of Heat Treatment on the Physical Properties and Surface Roughness of Turkish Hazel (Corylus colurna L.) Wood. International Journal of Molecular Science. 9(9): 1772-1783.
Kuroiwa, Y. 2010. Paulownia, The Savior of Environment. Kaiseisha Press. Japan.
Lee, W.H., Park, B.S., Chong, S.H., Kang, H.Y., Hwang, K.H., Byeon, H.S. 2008. Study on physical properties of domestic species III: sorption, thermal, electrical and acoustic properties of Lifiodendron tulipifera, Betula costata, Paulownia coreana. Journal of the Korean Wood Science and Technology 36(6): 1-12.
Liang, T., Wang, L. 2008. Thermal treatment of poplar hemicelluloses at $180^{\circ}C$ to $220^{\circ}C$ under nitrogen atmosphere. BioResources 12(1): 1128-1135.
Lim, H.M., Hong, S.H., Kang, H.Y. 2014. Investigation of the color change and physical properties of heat-treated Pinus koraiensis square lumbers. Journal of the Korean Wood Science and Technology 42(1): 13-19.
Park, Y.G., Eom, C.D., Park, J.H., Chang, Y.S., Kim, K.M., Kang, C.W., Yeo, H.M. 2012. Evaluation of physical properties of Korean pine (Pinus koraiensis Siebold & Zucc.) lumber heat-treated by superheated steam. Journal of the Korean Wood Science and Technology 40(4): 257-267.
Poncsak, S., Kocaefe, D., Bouazara, M., Pichette, A. 2005 Effect of high temperature treatment on the mechanical properties of birch (Betula papyrifera). Wood Science and Technology 66(1): 39-49.
Qi, Y., Jang, J.H., Hidayat, W., Lee, A.H., Lee, S.H., Kim, N.H. 2016a. Carbonization of reaction wood from Paulownia tomentosa and Pinus densiflora branch woods. Wood Science and Technology. 50(5): 973-987.
Qi, Y., Jang, J.H., Hidayat, W., Lee, A.H., Park, S.H., Lee, S.H., Kim, N.H. 2016b. Anatomical characteristics of Paulownia tomentosa root wood. Journal of the Korean Wood Sciences and Technology 44(2): 157-165.
Qi, Y., Jang, J.H., Park, S.H., Kim, N.H. 2014. Anatomical and physical characteristics of Korean paulownia (Paulownia coreana) branch wood. Journal of the Korean Wood Science and Technology 42(5): 510-515.
Qi, Y., Yang, C., Hidayat, Jang, J.H., Kim, N.H. 2016c. Solid bioenergy properties of Paulownia tomentosa grown in Korea. Journal of the Korean Wood Science and Technology 44(6): 890-896.
Ra, J.B., Kim, K.B., Leem, K.H. 2012. Effect of heat treatment conditions on color change and termite resistance of heat-treated wood. Journal of the Korean Wood Science and Technology 40(6): 370-377.
Segal, L., Creely, J.J., Martin, A.E., Conrad, C.M. 1959. An empirical method for estimating the degree of crystallinity of native cellulose using the X-ray diffractometer. Textile research Journal 29: 786-794.
Shebani, A.N., Van Reenen, A.J., Meincken, M. 2008. The effect of wood extractives on the termal stability of different wood species. Thermochimica Acta 471:43-50.
Shi, Q., Bao, F.C., Lu, J.X., Jiang, J.H. 2011. Effect of heat treatment temperature on the colour of Okan wood. Advanced Materials Research 214(1): 531-534.
Yildiz, S., Gezer, E.D., Yildiz, U.C. 2006. Mechanical and chemical behavior of sprucewood modified by heat. Building and Environment 41(12): 1762-1766.
Yoo, T. K., Jung, H. S. 1997. Effect of moisture contents and density of Paulownia tomentosa on acoustical properties. Journal of the Korean Wood Science and Technology 25(2): 61-66.
Yoon, K.J., Eom, C.D., Park, J.H., Kim, H.Y., Choi, I.G., Lee, J.J., Yeo, H.M. 2009. Color control and durability improvement of yellow polar (Liriodendron tulipifera) by heat treatments. Journal of the Korean Wood Science and Technology 37(6): 487-496.
Yoon, K.J., Eom, C.D., Park, J.H., Lee, Y.W., Choi, iI.G., Lee, J.J., Yeo, H.W. 2008. Control of discoloration of cedar wood (Cryptomeria japonica) by heat and UV treatment. Journal of the Korean Wood Science and Technology 36(6): 33-40.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.