참고문헌 (36)

1. D. J. Schuring and S. Futamura, "Rolling Loss of Pneumatic Highway Tires in the Eighties", Rubber Chem. Technol., 63, 315 (1990). 

   상세보기

2. G. Fontaras and Z. Samaras, "On the Way to 130 g $CO_{2}/km$ - Estimating the Future Characteristics of the Average Euro- pean Passenger Car", Energy Policy, 38, 1826 (2010). 

   상세보기

3. G. Heinrich and T. A. Vilgis, "Why Silica Technology Needs S-SBR in High Performance Tires?", Kautsch. Gummi Kunstst., 61, 368 (2008). 

4. P. Sae-oui, K. Suchiva, C. Sirisinha, W. Intiya, P. Yodjun, and U. Thepsuwan, "Effect of Blend Ratio and SBR Type on Properties of Carbon Black and Silica-Filled SBR/BR Tire Tread Compounds", Adv. Mater. Sci. Eng., 1 (2017). 

5. N. Hewitt, "Compounding Precipitated Silica in Elastormers", p. 1, William Andrew Publishing, Norwich U.S.A., 2007. 

6. W. Kaewsakul, K. Sahakaro, W. K. Dierkes, and J. W. M. Noordermeer, "Mechanistic Aspects of Silane Coupling Agents with Different Functionalities on Reinforcement of Silica-Filled Natural Rubber Compounds", Polym. Eng. Sci., DOI 10.1002/pen.23949 (2014). 

   상세보기

7. S.-M. Choi, E.-K. Lee, and S.-Y. Choi, "Effects of Silane- Treated Silica on the Cure Temperature and Mechanical Properties of Elastomeric Epoxy", Elastomer, 43, 147 (2008). 

8. B. Zhong, Z. Jia, D. Hu, Y. Luo, D. Jia, and F. Liu, "Enhancing Interfacial Interaction and Mechanical Properties of Styrene-Butadiene Rubber Composites via Silica-Supported Vulcanization Accelerator", Composites: Part A, 96, 129 (2017). 

   상세보기

9. B. Zhong, Z. Jia, D. Hu, Y. Luo, and D. Jia, "Reinforcement and Reinforcing Mechanism of Styrene-Butadiene Rubber by Antioxidant-Modified Silica", Composites: Part A, 78, 303 (2015). 

   상세보기

10. G. Seo, S. Kaang, C. K. Hong, D. S. Jung, C. S. Ryu, and D. H. Lee, "Preparation of Novel Fillers, Named Networked Silicas, and Their Effects of Reinforcement on Rubber Compounds", Polym. Int., 57, 1101 (2008). 

    상세보기

11. G. Seo, S. M. Park, K. Ha, K. T. Choi, C. K. Hong, and S. Kaang, "Effectively Reinforcing Roles of the Networked Silica Prepared Using 3,3'-Bis(Triethoxysilylpropyl)tetrasulfide in the Physical Properties of SBR Compounds", J. Mater. Sci., 45, 1897 (2010). 

    상세보기

12. C. Ryu, J.-K. Yang, W. Park, Y. Seo, S. J. Kim, D. Kim, S. Park, and G. Seo, "Reinforcement of Styrene-Butadiene/Poly-butadiene Rubber Compounds by Modified Silicas with Different Surface and Networked States", J. Appl. Polym. Sci., 134, DOI: 10.1002/app.44893 (2017). 

    상세보기

13. L. Ladouce-Stelandre, Y. Bomal, L. Flandin, and D. Labarre, "Dynamic Mechanical Properties of Precipitated Silica Filled Rubber: Influence of Morphology and Coupling Agent", Rubber Chem. Technol., 76, 145 (2003). 

    상세보기

14. C. J. Lin, T. E. Hogan, and W. L. Hergenrother, "On the Filler Flocculation in Silica and Carbon Black Filled Rubbers: Part II. Filler Flocculation and Polymer-Filler Interaction", Rubber Chem. Technol., 77, 90 (2004). 

    상세보기

15. S. Mihara, R. N. Datta, and J. W. M. Noordermeer, "Flocculation in Silica Reinforced Rubber Compounds", Rubber Chem. Technol., 82, 524 (2009). 

    상세보기

16. C. G. Robertson, C. J. Lin, R. B. Bogoslovov, M. Rackaitis, P. Sadhukhan, J. D. Quinn, and C. M. Roland, "Flocculation, Reinforcement, and Glass Transition Effects in Silica-Filled Styrene-Butadiene Rubber", Rubber Chem. Technol., 84, 507 (2011). 

    상세보기

17. N. Sombatsompop, E. Wimolmala, and T. Markpin, "Fly-Ash Particles and Precipitated Silica as Fillers in Rubbers. II. Effects of Silica Content and Si69-Treatment in Natural Rubber/Styrene-Butadiene Rubber Vulcanizates", J. Appl. Polym. Sci., 104, 3396 (2007). 

    상세보기

18. K.-J. Kim and J. VanderKooi, "Effects of Zinc Soaps on TESPT and TESPD-Silica Mixtures in Natural Rubber Compounds", ACS Rubber Division Meeting, Pittsburgh, PA, Oct. 2002. 

19. Y. W. Ngeow, A. V. Chapman, J. Y. Y. Heng, D. R. Williams, S. Mathys, and C. D. Hull, "Characterization of Silica Modified with Silanes by Using Thermogravimetric Analysis Combined with Infrared Detection", Rubber Chem. Technol., DOI:10.5254/rct.18.82626 (2018). 

    상세보기

20. A. Y. Coran, "Vulcanization: Conventional and Dynamic", Rubber Chem. Technol., 68, 351 (1995). 

    상세보기

21. J. Ramier, L. Chazeau, C. Gauthier, L. Guy, and M. N. Bouchereau, "Influence of Silica and Its Different Surface Treatments on the Vulcanization Process of Silica Filled SBR", Rubber Chem. Technol., 80, 183 (2007). 

    상세보기

22. Y. Li, M. J. Wang, T. Zhang, F. Zhang, and X. Fu, "Study on Dispersion Morphology of Silica in Rubber", Rubber Chem. Technol., 67, 693 (1994). 

    상세보기

23. H. H. Hassan, E. Ateia, N. A. Darwish, S. F. Halim, and A. K. Abd El-Aziz, "Effect of Filler Concentration on the Physico-Mechanical Properties of Super Abrasion Furnace Black and Silica Loaded Styrene Butadiene Rubber", Mater. Des., 34, 533 (2012). 

    상세보기

24. S. S. Sarkawi, W. K. Dierkes, and J. W. M. Noordermeer, "Elucidation of Filler-to-Filler and Filler-to-Rubber Interactions in Silica-Reinforced Natural Rubber by TEM Network Visualization", Eur. Polym. J., 54, 118 (2014). 

    상세보기

25. B. L. Lee, "Reinforcement of Uncured and Cured Rubber Composites and Its Relationship to Dispersive Mixing-An Interpretation of Cure Meter Rheographs of Carbon Black Loaded SBR and cis-Polybutadiene Compounds", Rubber Chem. Technol., 52, 1019 (1979). 

    상세보기

26. P. K. Pal and S. K. De, "Effect of Reinforcing Silica on Vulcanization, Network Structure, and Technical Properties of Natural Rubber", Rubber Chem. Technol., 55, 1370 (1982). 

    상세보기

27. J.-Y. Lee, B. Ahn, W. Kim, H. Moon, H.-J. Paik, and W. Kim, "The Effect of Accelerator Contents on the Vulcanizate Structures of SSBR/Silica Vulcanizates", Compos. Interfaces, 24, 563 (2017). 

    상세보기

28. C. H. Lee and B. T. Poh, "Temperature Dependence of Mooney Scorch Time of Rubber Compounds", J. Appl. Polym. Sci., 30, 71 (1985). 

    상세보기

29. G. B. Ouyang, "Modulus, Hysteresis, and the Payne Effect", Kautsch. Gummi Kunstst., 59, 332 (2006). 

    상세보기

30. M. Alimardani, M. Razzaghi-Kashani, R. Karimi, and A. Mahtabani, "Contribution of Mechanical Engagement and Energetic Interaction in Reinforcement of SBR-Silane-Treated Silica Composites", Rubber Chem. Technol., 89, 292 (2016). 

    상세보기

31. S. S. Sternstein, S. Amanuel, and M. L. Shofner, "Reinforcement Mechanisms in Nanofilled Polymer Melts and Elastomers", Rubber Chem. Technol., 83, 181 (2010). 

    상세보기

32. A. A. Ward and A. I. Khalf, "Electrical and Mechanical Properties of SBR Filled with Carbon Black-Silica Blends", Kautsch. Gummi Kunstst., 60, 623 (2007). 

33. P. Zhang, M. Morris, and D. Doshi, "Materials Development for Lowering Rolling Resistance of Tires", Rubber Chem. Technol., 89, 79 (2016). 

    상세보기

34. C. Ryu, S. J. Kim, D. Kim, S. Kaang, and G. Seo, "The Effect of Surface Area of Silica on Their Reinforcing Performance to Styrene-Butadiene Rubber Compounds", Elas. Compos., 51, 128 (2016). 

    원문보기 상세보기

35. D. E. Hall and J. Cal Moreland, "Fundamentals of Rolling Resistance", Rubber Chem. Technol., 74, 525 (2001). 

    상세보기

36. C. J. Lin, W. Michael York, and R. J. Cody, "Silanization Characterization and Compound Properties of Silica-Filled Rubber Containing a Blocked Mercapto Silane", Rubber Chem. Technol., 90, 126 (2017). 

    상세보기