다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
디지털콘텐츠학회 논문지 = Journal of Digital Contents Society, v.19 no.7, 2018년, pp.1297 - 1302
AI-Helper
Propose of this study was to compared and analyzes the cranking between the newly developed hand cycle prototype and the hign-end hand cycle that are sold on the market for the disabled athletes. For this study, 10 male subjects, who had the same type of disability, were selected from the Korea Disa...
T. Abel, T., M. Kroner, S. Rojas Vega, C. Peters, C. Klose, and P. Platen, “Energy expenditure in wheelchair racing and handbiking - a basis for prevention of cardiovascular diseases in those with disabilities,” European Journal of Cardiovascular Prevention and Rehabilitation, Vol. 10, No. 5, pp. 371-376, 2003a.
T. Abel, S. Schneider, P. Platen, and H. K. Struder, “Performance diagnostics in handbiking during competition,” Spinal Cord, Vol. 44, No. 4, pp. 211-216, 2006.
U. Arnet, T. Hinrichs, V. Lay, S. Bertschy, H. Frei, and M. W. G. Brinkhof, “Determinants of handbike use in persons with spinal cord injury: results of a community survey in Switzerland,” Disability and Rehabilitation, Vol. 38, No. 1, pp. 81-86, 2016.
A. Faupin, P. Gorce, E. Watelain, C. Meyer, and A. Thevenon, “A biomechanical analysis of handcycling: A case study,” Journal of Applied Biomechanics, Vol. 26, No. 2, pp. 240-245, 2010.
V. L. Goosey-Tolfrey, H. Alfano, and N. Fowler, "The influence of crank length and cadence on mechanical efficiency in hand cycling," European journal of Applied Physiology, Vol. 102, No. 2, pp. 189-194, 2008
C. Kramer, L. Hilker, and H. Bohm, “Influence of crank length and crank width on maximal hand cycling power and cadence,” European Journal of Applied Physiology, Vol. 106, No. 5, pp. 749-757, 2009a.
C. Kramer, G. Schneider, H. Bohm, I. Klopfer-Kramer, and V. Senner, “Effect of different handgrip angles on work distribution during hand cycling at submaximal power levels,” Ergonomics, Vol. 52, No. 10, pp. 1276-1286, 2009b.
A. Faupin, P. Gorce, and C. Meyer, “Effects of type and mode of propulsion on hand-cycling biomechanics in nondisabled subjects,” Journal of Rehabilitation Research & Development, Vol. 48, No. 9, pp. 1049-1060, 2011.
G. A. Mirka, “The quantification of EMG normalization error,” Ergonomics, Vol. 34, No. 3, pp. 343-352, 1991.
D. G. E. Robertson, G. E. Caldwell, J. Hamill, G. Kamen, and S. N. Whittlesey, Research Methods in Biomechanics. Champaign, Human kinetics, 2004.
H. E. Veeger, L. H. van der Woude, and R. H. Rozendal, “A computerized wheelchair ergometer. Results of a comparison study,” Scandinavian Journal of Rehabilitation Medicine, Vol. 24, No. 1, pp. 17-23, 1992.
H. W. Wu, L. J. Berglund, F. C. Su, B. Yu, A. Westreich, K. J. Kim, and K. N. An, “An instrumented wheel for kinetic analysis of wheelchair propulsion,” Journal of Biomechanical Engineering, Vol. 120, No. 4, pp. 533-535, 1998.
G. E. Caldwell, L. Li, S. D. McCole, and J. M. Hagberg, “Pedal and crank kinetics in uphill cycling,” Journal of Applied Biomechanics, Vol. 14, No. 3, pp. 245-259, 1998.
J. Verellen, D. Theisen, and Y. Vanlandewijck, “Influence of crank rate in hand cycling,” Medicine and science in sports and exercise, Vol. 36, No. 10, pp. 1826-1831, 2004.
H. A. Bafghi, A. de Haan, A. Horstman, and L. van der Woude, “Biophysical aspects of submaximal hand cycling,” International Journal of Sports Medicine, Vol. 29, No. 8, pp. 630-638, 2008.
A. Mader, “Glycolysis and oxidative phosphorylation as a function of cytosolic phosphorylation state and power output of the muscle cell,” European Journal of Applied Physiology, Vol. 88, No. 4-5, pp. 317-338, 2003.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.