$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

자연대류에서 유한요소법을 이용한 히트싱크의 성능비교
A performance comparison of heat sink using FEM in the natural convection 원문보기

한국금형공학회지 = Journal of the Korea Society of Die & Mold Engineering, v.12 no.1, 2018년, pp.31 - 35  

이민 (한국폴리텍대학 서울정수캠퍼스 컴퓨터응용기계설계과) ,  이춘규 (공주대학교 금형설계공학과)

Abstract AI-Helper 아이콘AI-Helper

The peltier thermoelectric module are used to cool the heat generated by electronic equipment. In order to increase the efficiency of the peltier thermoelectric module, the heat must be released to the outside. A heat sink is used to discharge such heat to the outside. in this paper, two types of he...

주제어

참고문헌 (12)

  1. Y. Pan, B. Lin, J. Chen, "Performance Analysis and Parametric Optimal Design of an Irreversible Multi-Couple Thermoelectric Refrigerator under various Operating Conditions," Appl. Energy, Vol. 84, pp. 882-892, 2007. 

  2. M. Chen, L. A. Rosendahl, T. Condra, "A Three-dimensional Numerical Model of Thermoelectric Generators in Fluid Power Systems," Int. J. Heat Mass Transfer, Vol. 54 pp. 345-355, 2011. 

  3. Luo, L. Chen, F. Sun, C. Wu, "Optimum Allocation of Heat Transfer Surface Area for Cooling Load and COP Optimization of a Thermoelectric Refrigerator," Energy Convers Manage, Vol. 44, pp. 3197-3206, 2003. 

  4. D. Champier, J. P. Bedecarrats, M. Rivaletto, F. Strub, "Thermoelectric Power Generation from Biomass Cook Stoves," Energy, Vol. 35 935-942, 2010. 

  5. D. R. Lee, "Investigation of Optimal Cooling Performance using Peltier Module and Heat Sink," Journal of the korea society for power system engineering, Vol. 10, pp. 65-70, 2006. 

  6. S. H. Yu, K. S. Lee, S. J. Yook, "Natural Convection Around a Radial Heat Sink," Int. J. Heat Mass Transfer Vol. 53, pp. 2935-2938, 2010. 

  7. R. Arularasan, R. Velraj, "Modeling and Simulation of A Parallel Plate Heat Sink using Computational Fluid Dynamics," Int. J. Adv. Manuf. Technol. Vol. 51, pp. 415-419, 2010. 

  8. B. S. Seo, K. J. Lee, J. K. Yang, Y. S. Cho, D. H. Park, "Development and Characterization of Opti mum Heat Sink for 30W Chip on Board LED Dow n-Light," Transactions on electrical and electronic materials, Vol. 13 pp. 292-296, 2012. 

  9. M. Lee, T. W. Kim, "A Study on the Heat Sink wit h Internal Structure using Peltier Module in The Na tural and Forced Convection," Journal of the Kore a Academia-Industrial cooperation Society, Vol. 15 pp. 4072-4080, 2014. 

  10. P. Teertstra, M. M. Yovanovich, J. R. Culham, "A nalytical Forced Convection Modeling Plate Fin H eat Sinks", J. Electronics Manufacturing, Vol. 10, pp. 253-261, 2000. 

  11. K. T. Chiang, C. C. Chou, N. M. Liu, "Applicatio n of Response Surface Methodology in Describing The Thermal Performances of Pin-Fin Heat Sinks," Int. Journal of Thermal Sciences Vol. 48, pp. 1196 -1205, 2009. 

  12. S. B. Park, Y. H Seo, "Die Casting Product Desi gn," Press Technology, Vol. 11, pp. 76-87, 2000. 

저자의 다른 논문 :

관련 콘텐츠

이 논문과 함께 이용한 콘텐츠

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로