최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기JKSDH : Journal of Korean Society of Dental Hygiene = 한국치위생학회지, v.19 no.6, 2019년, pp.1067 - 1075
박영대 (대구보건대학교 치기공과) , 강월 (대구보건대학교 치기공과)
Objectives: The present study aimed to compare the accuracy of removable partial denture (RPD) frameworks fabricated by selective laser sintering (SLS) before and after electropolishing. Methods: A partially edentulous mandibular model was used as the working model. Scanning of the model was perform...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
국부상의치란 무엇인가 | 국부상의치(Partial denture)는 상악 또는 하악의 치아 일부가 상실되었을 때, 상실된 치아와 그 주위 조직을 대체하는 보철물의 일종이다[1]. 국부상의치는 국소의치라고도 하는데, 남아있는 자연 치아와 치조제의 도움을 받아 기능하므로 오직 치조제의 도움으로만 기능하는 총의치와는 다른 개념이다[2]. | |
국소의치의 금속 프레임에 쓰이는 금속은 어떤 특징을 지녔는가? | 이러한 국소의치의 금속 프레임을 제작하기 위한 의료용 합금으로는 금합금과 비 귀금속인 Co-Cr계, Ni-Cr계, 티타늄 합금 등이 사용되고 있다[3]. 그 중에서 Co-Cr 합금은 비교적 우수한 생체적합성 및 적당한 기계적 성질과 내식성을 가지고 있기 때문에 주로 국소의치 금속 프레임의 재료로 사용되어 왔다[3]. 최근에는 디지털 기술이 발달함에 따라서 3D 프린터를 활용해 Co-Cr 합금으로 금속 프레임을 제작할 수 있게 되었다[4,5]. | |
국소의치의 구성요소는 무엇인가 | 국소의치의 구성요소로는 지대치와 금속 프레임 및 의치상으로 나눌 수 있다[1]. 지대치(abutment)는 하나 혹은 여러 개의 치아가 상실된 경우, 고정성 보철물로 상실된 부위를 회복한다[1]. |
Kang HW, Goo MW, Kim NS, Kim BS, Kim JD, Kim JH, et al. Removable partial denture prosthodontics. 1st ed. Seoul, Korea: Jisung Publishing House; 2012: 4.
Lee HS, Kim HS, Kim WS, Kim JJ, Park NG, Sin JW, et al. Complete denture technology. 4th ed. Seoul, Korea: Komoonsa; 2016: 1.
Hong MH. The study on inner stability of the dental SLM alloy body by conditions of the electro-polishing[Master's thesis]. Pusan: Univ. of Catholic, 2013.
Murakami I, Schulman A. Aspects of metal-ceramic bonding. Dent Clin North Am 1987;31:333-46.
Alageel O, Abdallah MN, Alsheghri A, Song J, Caron E, Tamimi F. Removable partial denture alloys processed by laser-sintering technique. J Biomed Mater Res B Appl Biomater 2018;106(3):1174-85. https://doi.org/10.1002/jbm.b.33929
Arafa KAO. Assessment of the fit of removable partial denture fabricated by computer-aided designing/computer aided manufacturing technology. Saudi Med J 2018;39:17-22. https://doi.org/10.15537/smj.2018.1.20796
Lima JM, Anami LC, Araujo RM, Pavanelli CA. Removable partial dentures: use of rapid prototyping. J Prosthodont 2014;23:588-91. https://doi.org/10.1111/jopr.12154
Alageel O, Abdallah MN, Alsheghri A, Song J, Caron E, Tamimi F. Removable partial denture alloys processed by laser-sintering technique. J Biomed Mater Res B Appl Biomater 2018;106:1174-85. https://doi.org/10.1002/jbm.b.33929
Almufleh B, Emami E, Alageel O, de Melo O, Seng F, Caron E, et al. Patient satisfaction with laser-sintered removable partial dentures: a crossover pilot clinical trial. J Prosthet Dent 2018;119:560-7. https://doi.org/10.1016/j.prosdent.2017.04.021
Ender A, Attin T, Mehl A. In vivo precision of conventional and digital methods of obtaining complete-arch dental impressions. J Prosthet Dent 2016;115: 313-20. https://doi.org/10.1016/j.prosdent.2015.09.011
Liu YF, Yu H, Wang WN, Gao B. A preliminary study on the forming quality of titanium alloy removable partial denture frameworks fabricated by selective laser melting. Zhonghua Kou Qiang Yi Xue Za Zhi 2017;52(6):351-4.
Felton DA, Kanoy BE, Bayne SC, Wirthman GP. Effect of in vivo crown margin discrepancies on periodontal health. J Prosthet Dent 1991;65:357-64. https://doi.org/10.1016/0022-3913(91)90225-l
Malekjafarian A, OBrien EJ, Micu LA. Investigation of buckling capacity of metal materials manufactured by laser 3D printing. Procedia Manuf 2017;7:696-700. https://doi.org/10.1016/j.promfg.2016.12.103
Li C, Fu CH, Guo YB, Fang FZ. Fast prediction and validation of part distortion in selective laser melting. Procedia Manuf 2015;1:355-65. https://doi.org/10.1016/j.promfg.2015.09.042
※ AI-Helper는 부적절한 답변을 할 수 있습니다.