최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기대한토목학회논문집 = Journal of the Korean Society of Civil Engineers, v.39 no.1, 2019년, pp.13 - 24
이해성 (서울대학교 건설환경공학부) , 송상원 (서울대학교 건설환경공학부) , 김지현 (서울대학교 교량설계핵심기술연구단)
This paper brings up fallacy of material factors specified for the design of concrete members in the current Korean limit state design code for highway bridges, and proposes new material factors based on a robust optimization scheme to overcome the fallacy. It is shown that the current load factors ...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
AASHTO 교량설계기준(AASHTO, 2014)와 유로코드(CEN, 2002)의 차이점은? | 국내외적으로 교량의 설계기준에 신뢰도에 기반한 한계상태설계법이 널리 적용되고 있으며, 우리나라에서는 2010년에 도입되어 현재 국내 교량설계에 적용되고 있다. 국외의 AASHTO 교량설계기준(AASHTO, 2014)와 유로코드(CEN, 2002)는 모두 한계상태설계법에 기반하고 있어 개념적으로는 상당히 유사하지만 콘크리트부재를 설계하는 방식이 서로 다르다. AASHTO 교량설계기준에서는 부재강도 전체의 불확실성을 고려하여 부재저항계수를 정의하고 있으며, 유로코드에서는 재료저항의 불확실성을 고려한 재료계수를 제시하고 있다. | |
재료계수의 정의는 무엇인가? | 부재저항계수는 재료의 공칭강도와 실제 강도의 차이, 부재의 제작 오차, 그리고 부재 강도 추정 및 구조 해석의 불확실성을 고려하기 위한 부분안전계수로 설계강도는 부재저항계수를 공칭강도에 곱한 값으로 정의된다. 반면에 재료계수는 재료의 공칭강도에 곱하여 재료의 설계 값을 설정하기 위하여 설정되는 부분안전계수이며, 이 때의 설계강도는 재료의 설계 값으로 계산되는 강도로 정의된다. | |
유로코드의 접근법의 유도과정에서 문제점은? | 유로코드에서는 신뢰도기반 부분안전계수의 기본 개념에 맞추어 재료계수를 정의하고 있지만, 유도과정에서 몇 가지 문제점을 발견하여 이에 대한 해결책을 제시하였다. 유로코드에서의 문제점으로 콘크리트와 철근의 파괴점에서 한계상태식의 단위법선벡터 성분을 동일하게 가정한 점, 하중계수를 고려하지 않은 상태에서 재료계수를 독립적으로 결정한 점, 그리고 복합재료의 부재거동에 대한 불확실성을 고려하지 않은 점을 들 수 있다. 이 논문에서는 유로코드의 접근법의 단점을 해결하기 위하여 신뢰도해석을 통하여 콘크리트와 철근의 파괴점에서 한계상태식의 단위법선벡터 성분을 계산하였으며, 그 대표값을 적용하여 재료계수를 결정하였다. |
American Association of State Highway and Transportation Officials (AASHTO) (2014). AASHTO LRFD Bridge Design Specifications, Washington, DC.
Der Kiureghian, A., Zhang, Y. and Li, C.-C. (1994). "Inverse reliability problem." Journal Eng. Mech., Vol. 120, No. 5, pp. 1154-1159.
European Committee for Standardization (CEN) (2002). Eurocode 0: Basis of Structural Design EN 1990, Brussels, Belgium.
European Concrete Platform (ECP) (2008). Eurocode 2 Commentary, European Concrete Platform ASBL, Brussels, Belgium.
Haldar, A. and Mahadevan, S. (2000). Probability, Reliability and Statistical Methods in Engineering Design, John Wiley & Sons, Inc., New York, pp. 181-224.
Kim, J. H. and Lee, J. H. (2000). "Material resistance factors for reinforced concrete flexural and compression members." Journal of the Korea Concrete Institute, KCI, Vol. 12, No. 2, pp. 21-30 (in Korean).
Korea Concrete Institute (KCI).Architectural Institute of Korea (AIK) (1999). Structural Concrete Design Code, Kimoondang (in Korean).
Lee, H. S., Bae, C. and Kim, J. H. (2018a). "Assessment of reliability levels and adjustment of load-resistance factors using optimization for gravitational loads-governed limit states of the AASHTO LRFD bridge design specifications." KSCE Journal of Civil Engineering, KSCE, Vol. 22, No. 9, pp. 3462-3472.
Lee, H. S., Song, S. W. and Kim, J. H. (2018b). "Determination of optimal load-resistance factors for gravitational loads-governed limit state of korean bridge design code." KSCE Journal of Civil Engineering, KSCE (under review).
Lee, J. H. (2015). Prestressed concrete: strength design and limit state design, Dong Myeoung publishers, pp. 180-182 (in Korean).
Lee, S. H. (2014). Calibration of the Load-Resistance Factors for the Reliability-based Design of Cable-supported Bridges, Ph. D. thesis, Seoul National University (in Korean).
Ministry of Construction and Transportation (MOCT) (2005). Korean Highway Bridge Design Code, MOCT (in Korean).
Ministry of Land, Infrastructure and Transport (MOLIT) (2016). Korean Highway Bridge Design Code (Limit State Design), MOLIT (in Korean).
Nowak, A. S. (1999). Calibration of LRFD bridge design code, NCHRP Report 368, Transportation Research Board, Washington, D.C.
Paik, I., Hwang, E. S. and Shin, S. (2009). "Reliability analysis of concrete bridges designed with material and member resistance factors." Computers and Concrete, Techno-Press, Vol. 6, No. 1, pp. 59-78.
Rackwitz, R. and Fiessler, B. (1978). "Structural reliability under combined random load sequences." Comput. Struct., Vol. 9, No. 5, pp. 489-494.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.