최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기목재공학 = Journal of the Korean wood science and technology, v.47 no.1, 2019년, pp.90 - 100
Oh, Jung-ae (Wood Products Analysis & Certification Division, Korea Forestry Promotion Institute) , Seo, Jeong-Wook (Department of Wood and Paper Science, Chungbuk National University) , Kim, Byung-Ro (Department of Wood and Paper Science, Chungbuk National University)
본 연구는 수목의 수령을 조사하는 방법으로 레지스토그래피를 활용하는데 있어서 수종별로 가장 적합한 삽입속도를 찾기 위하여 수행되었다. 회전속도는 1,500 r/min로 고정하였다. 수종은 낙엽송, 더글라스 퍼, 잣나무, 전나무, 느티나무이다. 실험결과 수종에 따른 적합한 삽입속도는 느티나무 75 cm/min, 낙엽송과 더글라스 퍼 100 cm/min, 전나무 150 cm/min, 잣나무 175 cm/min으로 나타났다. 하지만 모든 경우에서 연륜폭이 1 mm이하일 경우 연륜경계 확인이 어려운 것으로 확인되었다. 연륜폭이 1 mm이하인 경우를 제외하고는 연륜폭측정기와 레지스토그래피의 연륜폭그래프는 매우 일치하였다. 향후 연륜폭이 1mm 이하인 미세연륜 확인이 가능한 레지스토그래피가 개발된다면 레지스토그래피가 수령조사를 위해 전통적으로 활용되는 생장편의 연륜관찰방법을 대체할 수 있을 것이다. 또한 레지스토그래피의 연륜폭그래프는 생장량 조사에도 활용할 수 있을 것으로 판단된다.
This study aims to determine the ideal feed speed of a resistograph to evaluate the number of tree rings in several tree species. The needle speed was fixed at 1,500 r/min. Herein, various tree species, such as Pseudotsuga menziesii, Pinus koraiensis, Abies holophylla, and Zelkova serrata, were cons...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Bilgin, G., Adnan, G., Gokhan, K. 2012. Is Resistograph an Appropriate Tool for the Annual Ring Measurement of Pinus brutia?. NDE for safety / Defektoskopie 2012.
Ceralid, C., Mormone, V., Ermolli, E.R. 2001. Resistographic Inspection of Ancient Structures for the Evaluation of Mechanical Characteristics. Materials and structures 34(235): 59-63.
Denise, J., Gregory, M., Michael, T., Marc, N. 2010. The Measurement of Wood Decay in Landscape Trees. Arboriculture & Urban Forestry 36(3): 121-127.
Dujesiefken, D., Liese, W. 2006. Die wundrektionen von baumen- CODIT Heute. In: D. Dujesiefken, P. Kockerbeck (eds), Jahrbuch der Baumpflege 2006: 21-40. Thalacker Medien, Braunschweig.
Eckstein, D., Sass, U. 1994. Bohrwiderstandsmessungen an Laubbaumen und ihre holzanatomische Interpretation. Holz als Rohund Werkstoff 52: 279-286.
Fikret, I., Bailian, L. 2003. Rapid Assessment of Wood Density of Live Trees Using the Resistograph for Selection in Tree Improvement Programs. Canadian Journal of Forest Research 33: 2426-2435.
Frank, R. 1994. Resistographic Visualization of Treering Density Variations. International Conference on Tree Rings, Environment, and Humanity.
Frank, R. 2012. Basics of Micro-resistance Drilling for Timber Inspection. Holztechnologie 53(3): 24-29.
Frank, R. 2013. Detecting Fungal Decay in Palm Stems by Resistance Drilling. Florida arborist spring 2013.
Frankenstein, C., Eckstein, D., Schmitt, U. 2005. The Onset of Cambium Activity - A Matter of Agreement?. Dendrochronologia 23(1): 57-62.
Gruber, F. 2000. Vergleichende Messergebnisse zur Identifizierung von Schadstellen im Fichtenholz (Picea abies L. Karst.) mit den Bohrmessgeaten Teredo, Resistograph 1410 und Impulshammer-Schallmesssystem. Allgemeine Forest und Jagdzeitung 172.
Grunwald, C., Stabile, J., Waldman, J., Gross, R., Wirgin, I. 2002. Population Genetics of Shortnose Sturgeon Acipenser Brevirostrum Based on Mitochondrial DNA Control Region Sequences. Molecular Ecology 11(10): 1885-1898.
Hwang, W.J., Kanetaka, S., Sasaki, T. 2008. Possibility of Deterioration Diagnosis for Wooden Structures using Resistograph. Journal of the Korean Wood Science and Technology Conference Proceedings. pp. 71-72.
IML Australia (C). 2013. IML Resistograph Testing Standard, Procedures & Audit. IML wood testing systems.
Jung, S.Y., Seo, M.S., Hong, J.Y., Kim, S.J., Jung A,M., Kim, J.S. 2014. Study on the Discoloration Identified from the Column of Wooden house, Hyunchungsa (Shrine) - Focused on Influence of Microorganisms and Correlation with Strength. Journal of National Cultural Properties Research Institute 47(4): 58-73.
Lee, K.J. 2014. An introduction to forest science. Hyangmunsa Press, Seoul, Korea.
Lukaszkiewicz, J., Kosmala, M., Chrapka, M., Borowski, J. 2005. Determining the Age of Streetside Tilia cordata trees with a DBH-BASED Model. Journal of Arboriculture 31(6): 280-284.
Michael, S., Erin, M., Joseph M., Richard, G. 2003, Use and Calibration of the Resistograph for Analysis of Oak (Quercus sp.) Decay and Callus Formation Associated with Fire Scars. University of Missouri, Department of Forestry.
Saez, J.L., Corona, C., Berger, F. 2008. Use of Resistograph for Dendrogeomorphological Analysis of Avalanche Impacts (massif de l'Oisans, France). Geophysical Research Abstracts. Vol.10.
Seo, J.W., Jeong, H.M., Sano, M., Choi, E.B., Park, J.H., Lee, K.H., Kim, Y.J., Park, H.C. 2017b. Establishing tree ring ${\delta}$ 18O chronologies for principle tree species (T. cuspidata, P. koraiensis, A. koreana, Q. mongolica) at subalpine zone in Mt. Jiri National Park and their correlations with the corresponding climate. Journal of the Korean Wood Science and Technology 45(5): 661-670.
Shigo, A.L., Marx, H.G. 1977. Compartmentalization of decay in trees. USDA Forest Service Agriculture imformation Bulletin 405.
Son, Y.M. 2007. Age measurement of trees. National Institute of Forest Science.
Ukrainetz, N.K., O'Neill, G.A. 2010. An Analysis of Sensitivities Contributing Measurement Error to Resistograph Values. Canadian Journal of Forest Research 40: 806-811.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.