최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기International journal of naval architecture and ocean engineering, v.11 no.1, 2019년, pp.33 - 43
Jasak, Hrvoje (University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture) , Vukcevic, Vuko (University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture) , Gatin, Inno (University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture) , Lalovic, Igor (Uljanik d.d.)
A comparison between sea trial measurements and full-scale CFD results is presented for two self-propelled ships. Two ships considered in the present study are: a general cargo carrier at Froude number
Aulisa, E., Manservisi, S., Scardovelli, R., Zaleski, S., 2003. A geometrical area-preserving Volume-of-Fluid advection method. J. Comput. Phys. 192 (1) https://doi.org/10.1016/j.jcp.2003.07.003.
Batchelor, F.R., 1967. An Introduction to Fluid Dynamics. Cambridge University Press.
Beaudoin, M., Jasak, H., 2008. Development of generalized grid interface for turbomachinery simulations with OpenFOAM. In: Proceedings of the Open Source CFD International Conference.
Carrica, P., Castro, A., Stern, F., 2010. Self-propulsion computations using a speed controller and a discretized propeller with dynamic overset grids. J. Mar. Sci. Technol. 15, 316-330. https://doi.org/10.1007/s00773-010-0098-6.
Carrica, P.M., Fu, H., Stern, F., 2011. Computations of self-propulsion free to sink and trim and of motions in head waves of the KRISO Container Ship (KCS) model. Appl. Ocean Res. 33, 309-320.
Carrica, P.M., Mofidi, A., Martin, E., 2015. Progress toward Dire:t CFD simulation of Manoeuvres in waves. In: Proceedings of the MARINE 2015 Conference, pp. 327-338.
Castro, A., Carrica, P.M., Stern, F., 2011. Full scale self-propulsion computations using discretized propeller for the KRISO container ship KCS. Comput. Fluids 51, 35-47. https://doi.org/10.1016/j.compfluid.2011.07.005.
Demirdzic, I., 2015. On the discretization of the diffusion term in finite-volume continuum mechanics. Numer. Heat Transf. Part B 68, 1-10. https://doi.org/10.1080/10407790.2014.985992.
Desjardins, O., Moureau, V., Pitsch, H., 2008. An accurate conservative level set/ghost fluid method for simulating turbulent atomization. J. Comput. Phys. 227 (18), 8395-8416.
Eca, L., Hoekstra, M., 2014. A procedure for the estimation of the numerical uncertainty of cfd calculations based on grid refinement studies. J. Comput. Phys. 262, 104-130. https://doi.org/10.1016/j.jcp.2014.01.006.
Ferziger, J.H., Peric, M., 1996. Computational Methods for Fluid Dynamics. Springer.
Huang, J., Carrica, P.M., Stern, F., 2007. Coupled ghost fluid/two-phase level set method for curvilinear body-fitted grids. Int. J. Numer. Meth. Fluids 44, 867-897. https://doi.org/10.1002/fld.1499.
Issa, R.I., 1986. Solution of the implicitly discretised fluid flow equations by operator-splitting. J. Comput. Phys. 62, 40-65.
Jacobsen, N.G., Fuhrman, D.R., Fredsoe, J., 2012. A wave generation toolbox for the open-source CFD library: OpenFoam $^{(R)}$ . Int. J. Numer. Met. Fluids 70 (9), 1073-1088. https://doi.org/10.1002/fld.2726.
Jasak, H., 1996. Error Analysis and Estimation for the Finite Volume Method with Applications to Fluid Flows. Ph.D. thesis. Imperial College of Science, Technology & Medicine, London.
Jasak, H., Weller, H., Gosman, A., 1999. High resolution NVD differencing scheme for arbitrarily unstructured meshes. Int. J. Numer. Met. Fluids 31, 431-449.
Jasak, H., Vukcevic, V., Gatin, I., 2015. Numerical simulation of wave loads on static offshore structures. In: CFD for Wind and Tidal Offshore Turbines. Springer Tracts in Mechanical Engineering, pp. 95-105.
Juretic, F., 2017. cfMesh: Advanced Meshing Tool. cfMesh.com [Online; Accessed 22 February 2017].
Kim, G.-H., Jun, J.-H., 2015. Numerical simulations for predicting resistance and self-propulsion performances of JBC using OpenFOAM and star-CCM+. In: Proceedings of the Tokyo 2015: a Workshop on CFD in Ship Hydrodynamics, vol. 3, pp. 285-296.
Krasilnikov, V., 2013. Self-propulsion RANS computations with a single-screw container ship. In: Proceedings of the Third International Symposium on Marine Propulsors, pp. 430-438.
Lalanne, B., Villegas, L.R., Tanguy, S., Risso, F., 2015. On the computation of viscous terms for incompressible two-phase flows with level set/ghost fluid method. J. Comput. Phys. 301, 289-307.
Larsson, L., Stern, F., Visonneau, M., Hirata, N., Hino, T., Kim, J. (Eds.), 2015. Tokyo 2015: a Workshop on CFD in Ship Hydrodynamics, vol. 2. NMRI (National Maritime Research Institute), Tokyo, Japan.
Larsson, L., Stern, F., Visonneau, M., Hirata, N., Hino, T., Kim, J. (Eds.), 2015. Tokyo 2015: a Workshop on CFD in Ship Hydrodynamics, vol. 3. NMRI (National Maritime Research Institute), Tokyo, Japan.
Lloyd's Register, 2016. A Workshop on Ship Scale Hydrodynamic Computer Simulation. http://www.lr.org/en/news-and-insight/events/ship-scale-hydrodynamics-numerical-methods-workshop.aspx [Online; Accessed 22 February 2017].
Menter, F.R., Kuntz, M., Langtry, R., 2003. Ten years of industrial experience with the SST turbulence model. Turb. Heat Mass Transf. 4, 625-632.
Patankar, S.V., Spalding, D.B., 1972. A calculation procedure for heat, mass and momentum transfer in three-dimensional parabolic flows. Int. J. Heat Mass Transf. 15, 1787-1806.
Ponkratov, D. (Ed.), 2017. Proceedings: 2016Workshop on Ship Scale Hydrodynamic Computer Simulations. Lloyd's Register, Southampton, United Kingdom.
Ponkratov, D., Zegos, C., 2014. Ship scale CFD self-propulsion simulation and its direct comparison with sea trial results. In: Proceedings of the International Conference on Computational and Experimental Marine Hydrodynamics (MARHY'14).
Ponkratov, D., Zegos, C., 2015. Validation of ship scale CFD self-propulsion simulation by the direct comparison with sea trial results. In: Proceedings of the Fourth International Symposium on Marine Propulsors.
Queutey, P., Visonneau, M., 2007. An interface capturing method for free-surface hydrodynamic flows. Comput. Fluids 36, 1481-1510. https://doi.org/10.1002/j.compfluid.2006.11.007.
R. MPEC.245(66), 2014. Guidelines on the Method of Calculation of the Attained EEDI for New Ships, Adopted on 2 March 2012.
Roenby, J., Bredmose, H., Jasak, H., 2016. A computational method for sharp interface advection. Open Sci. 3 (11) https://doi.org/10.1098/rsos.160405.
Rusche, H., 2002. Computational Fluid Dynamics of Dispersed Two - Phase Flows at High Phase Fractions. Ph.D. thesis. Imperial College of Science, Technology & Medicine, London.
Seb, B., 2017. Numerical Characterisation of a Ship Propeller. Master's thesis. Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb.
Shen, Z., Wan, D., Carrica, P.M., 2015. Dynamic overset grids in OpenFOAM with application to KCS self-propulsion and maneuvering. Ocean Eng. 108, 287-306. https://doi.org/10.1016/j.oceaneng.2015.07.035.
Simonsen, C.D., Otzen, J.F., Joncquey, S., Stern, F., 2013. EFD and CFD for KCS heaving and pitching in regular head waves. J. Mar. Sci. Technol. 18, 435-459. https://doi.org/10.1007/s00773-013-0219-0.
Stern, F., Wilson, R.V., Coleman, H.W., Paterson, E.G., 2001. Comprehensive approach to verification and validation of CFD Simulations-Part 1: methodology and procedures. J. Fluid Eng. 123 (4), 793-802. https://doi.org/10.1115/1.1412235.
Tzabiras, G., Polyzos, S., Zarafonitis, G., 2009. Selfepropulsion simulations of passenger-Ferry ships with bow and stern propulsors. In: Proceedings of the 12th Numerical Towing Tank Symposium (NUTTS).
Ubbink, O., Issa, R.I., 1999. A method for capturing sharp fluid interfaces on arbitrary meshes. J. Comput. Phys. 153, 26-50.
van Leer, B., 1977. Towards the ultimate conservative difference scheme. IV. A new approach to numerical convection. J. Comput. Phys. 23, 276-299.
Visonneau, M., Deng, G., Guilmineau, E., Queutey, P., Wackers, J., 2016. Local and global assessment of the flow around the Japan bulk carrier with and without energy saving devices at model and full scale. In: Proceedings of the 31st Symposium on Naval Hydrodynamics.
Vukcevic, V., 2016. Numerical Modelling of Coupled Potential and Viscous Flow for Marine Applications - in Preparation. Ph.D. thesis. Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb. https://doi.org/10.13140/RG.2.2.23080.57605.
Vukcevic, V., Jasak, H., Gatin, I., 2017. Implementation of the ghost fluid method for free surface flows in polyhedral finite volume framework. Comput. Fluids 153, 1-19. https://doi.org/10.1016/j.compfluid.2017.05.003.
Weller, H.G., Tabor, G., Jasak, H., Fureby, C., 1998. A tensorial approach to computational continuum mechanics using object oriented techniques. Comput. Phys. 12, 620-631.
Xing-Kaeding, Y., Gatchell, S., 2015. Resistance and selfepropulsion predictions for Japan bulk carrier without and with duct using the FreSCo+ code. In: Proceedings of the Tokyo 2015: a Workshop on CFD in Ship Hydrodynamics, vol. 3, pp. 291-296.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.