최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국구조물진단유지관리공학회 논문집 = Journal of the Korea Institute for Structural Maintenance and Inspection, v.23 no.6, 2019년, pp.92 - 98
유성원 (가천대학교 토목환경공학과) , 최영철 (가천대학교 토목환경공학과)
In this study, we developed a repair material incorporating PVA powder resin and nylon fiber into cemented carbide used in the existing field to improve adhesion performance and water tightness with existing concrete. Flexural behavior evaluation was performed. The main experimental variables were P...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
콘크리트 구조물의 보수에 제한이 있는 이유는? | 콘크리트 구조물의 보수는 주변 환경조건에 따라 작업시간에 제한이 있다. 구조물의 신속한 재사용 및 사용자 불편의 최 소화하기 위해 보수작업 시간의 단축이 필요하기 때문에, 보수재료는 빠른 경화시간 확보가 필수적이다. 이러한 보수재료에는 급결제(accelerating agent) 또는 초속경 시멘트(rapid hardening cement)가 일반적으로 사용된다. Table 1은 이번 연구에서 사용된 초속경 시멘트의 화학성분과 기초 물성을 나타내고 있다. | |
초속경시멘트의 구성비를 말하라 | Table 1은 이번 연구에서 사용된 초속경 시멘트의 화학성분과 기초 물성을 나타내고 있다. 초속경시멘트의 밀도는 2.87g/cm2 , 분말도 5,380cm2 /g이며, 보그식(Bogue’s equation) 에 의한 광물조성은 C3S, C2S, C3A, C4AF, C4A3S의 성분이 각각 중량비로 16.0%, 16.0%, 3.0%, 6.0%, 30.0%이다.(Noor et al., 2004; mehata et al., 2006; Papadakis et al 1991) | |
최근 전국 하수관로의 노후화는 어떻게 되는가? | 최근 전국 하수관로의 노후화로 인해 전체 하수관로 중 33.9%(41,820km)가 20년 이상 경과되었으며, 그중 서울은 10,487km 중 70% 이상이 노후 하수관으로 확인되었다. 콘크리트 하수관의 대표적인 열화현상은 하수 내에 포함된 황화물과 유기물을 이용하여 증식하는 미생물의 산화⋅환원작용에 의하여 생성된 황산에 의한 생⋅화학적 부식, 강산이나 강알칼리를 함유한 폐수 유입에 의한 직접적인 화학부식, 관로부설 지점의 내⋅외부에 존재하는 비산 물질에 의한 콘크리트 자체의 탄산화에 의한 열화 등이 있다(Ministry of Environment, 2015). |
Ministry of Environment(2015), Ground subsidence sewer pipe investigation manual, Ministry of Environment, Korea, 1-6.
Allen, R. T. L., Edwards, S. C., Shaw, D. N. (1992), Repair of concrete structures 2nd Edition, Spon Press, New Delhi, 56-65.
Kosednar, J., Mailvaganam, N. P. (2005), Selection and Use of Polymer-Based Materials in the Repair of Concrete Structures, Journal of Performance of Constructed Facilities, 19(3), https://doi.org/10.1061/(ASCE)0887-3828(2005)19:3(229).
Cabrera, J. G., Hasan, A. I. (1997), Performance properties of concrete repair materials, Construction and Building Materials, 11(5-6), 283-290.
Noor, M. A., Uomoto, T. (2004), Rheology of high flowing mortar and concrete, Materials and Structures, 37(8), 513-521.
Mehta, P. Kumar and Monteiro, Paulo J. M.(2006), Concrete 3rd Edition, McGraw-Hill, New York, 207-209.
Papadakis, Vagelis G., Fardis, Michael N., and Vayenas, Costas G.(1991), Fumdamental Modeling and Experimental Investigation of Concrete Carbonation, ACI Materials Journal, 88(4), 363-373.
ASTM C305(2014), Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency, American Society for Testing and Materials.
ASTM C109/C109M(2016), Standard Test Method for Compressive Strength of Hydraulic Cement Mortars, American Society for Testing and Materials.
EN 1504-3. (2005), Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Structural and non-structural repair, European Committee for Normalization.
Monteiro, F. C. B., Trautwein, L. M., Almeida, L. C. (2017), The importance of the European standard EN 1504, on the protection and repair of concrete structures, Journal of Building Pathology and Rehabilitation, 2(3), https://doi.org/10.1007/s41024-017-0022-0.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.