최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Composites research = 복합재료, v.32 no.6, 2019년, pp.382 - 387
최순호 (Department of Mechanical Engineering, Kumoh National Institute of Technology) , 윤성호 (Department of Mechanical Engineering, Kumoh National Institute of Technology)
A single frequency strain mode test, a stress relaxation mode test, and a creep test using RH-DMA were performed to investigate the effects of relative humidity and temperature on the viscous properties of PET film. The relative humidity was 10%, 30%, 50%, 70%, and 90%. The temperature was considere...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
RH-DMA 시험은 무엇인가? | 재료의 거동은 외부에서 가해진 변형에 대해 시간적 지연 없이 반응하여 변형에너지로 저장되는 탄성 거동과 손실에너지로 방출되는 점성 거동으로 구분된다. RH-DMA는 규정된 상대습도 하에서 시간, 온도 및 진동수의 함수인 사인파 형태의 응력을 가하고 그에 대한 반응인 변형률을 수집하여 재료의 점탄성 특성을 측정하게 된다. | |
상대습도와 온도가 플라즈마 처리된 PET 필름의 노화 거동에 미치는 영향의 결과는 무엇인가? | Geyter 등[4]은 상대습도와 온도가 플라즈마 처리된 PET 필름의 노화 거동에 미치는 영향을 조사하기 위해 4~80o C의 온도와 30~90%의 상대습도에서 192시간 동안 노출시킨 PET 필름의 표면 접촉각을 측정하고 화학적 변화를 관찰하였다. 연구결과에 따르면 상대습도와 온도가 낮으면 노화가 느리게 진행되지만 습도와 온도가 높으면 수분에 의한 가소화가 유발되어 고분자 사슬 구조 사이의 공간을 크게 만드는 폴리머 사슬 변화로 인해 노화가 빠르게 진행된다고 하였다. Karnav 등[5]은 상대습도와 온도에 따른 솔라 PV 모듈 백시트용 PET 필름의 열화 거동을 조사하기 위해 3~95%의 상대습도와 65~95o C의 온도에서 2000시간 노출시킨 PET 필름의 인장 특성과 유리전이온도를 측정하였다. | |
PET의 열화 시간이 길어지면 정전 용량이 낮아지는 이유는 무엇인가? | Lee[6]는 열화 시간에 따른 PET 필름의 전기적 열화 거동을 조사하기 위해 180o C의 온도에서 2시간, 4시간, 8시간 동안 열화 시킨 PET 필름의 정전 용량과 유전 손실을 측정하고 전자현미경을 통해 표면 상태를 관찰하였다. 연구결과에 따르면 열화 시간이 길어지면 케톤기(-C=O-)와 디옥시기(-O-R-O-)의 체인을 함유한 비결정성 분자 사이의 인력이 높아지기 때문에 정전 용량은 낮아진다고 하였다. 또한 열화 시간이 길어지면 PET 필름의 표면에 열분해가 심하게 발생된다고 하였다. |
Anh, M.H., Cho, E.S., and Kwon, S.J., "Characteristics of ITO-resistive Touch Film Deposited on a PET Substrate by In-line DC Magnetron Sputtering," Vacuum, Vol. 101, 2014, pp. 221-227.
Park, S.H., and Kim, S.H., "Poly(ethylene terephthalate) Recycling for High Value Added Textiles," Fashion and Textiles, Vol. 1, No. 1, 2014.
Wiria, F.E., Tham, C.L., Subramanian, A.S., Tey, J.N., Qi, X., and S.B., "Improving Surface Quality of Polyethylene Terephthalate Film for Large Area Flexible Electronic Applications," Journal of Solid State Electrochemistry, Vol. 20, No. 7, 2016, pp. 1895-1902.
Geyter, N.D., Morent, R., and Leys, C., "Influence of Ambient Conditions on the Ageing Behavior of Plasma-treated PET Surfaces," Nuclear Instruments & Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms, Vol. 266, No. 12-13, 2008, pp. 3086-3090.
Karnav, K., "Degradation of Polyester Film Exposed to Accelerated Indoor Damp Heat Aging," Proceeding of 2011 37th IEEE Photovoltaic Specialists Conference, 2011, pp. 96-100.
Pirzadeh, E., Zadhoush, A., and Haghighat, M., "Hydrolytic and Thermal Degradation of PET Fibers and PET Granule: The Effects of Crystallization, Temperature, and Humidity," Journal of Applied Polymer Science, Vol. 106, 2007, pp. 1544-1549.
Bonnaillie, L.M., and Tomasula, P.M., "Application of Humidity-controlled Dynamic Mechanical Analysis (DMA-RH) to Moisture-sensitive Edible Casein Films for Use in Food Packaging," Polymers, Vol. 7, No. 1, 2015, pp. 91-114.
Goertzen, W.K., and Kessler, M.R., "Dynamic Mechanical Analysis of Carbon/epoxy Composites for Structural Pipeline Repair," Journal of Composites Part B: Engineering, Vol. 38, No. 1, 2007, pp. 1-9.
Sheng, X., Akinc, M., and Kessler, M.R., "Creep Behavior of Bisphenol E Cyanate Ester/alumina Nanocomposites," Materials Science and Engineering A, Vol. 527, No. 21-22, 2010, pp. 5892-5899.
Ghosh, S.K., Rajesh, P., Srikavya, B., Rathore, D.K., Prusty, R.K., and Ray, B.C., "Creep Behavior Prediction of Multi-layer Graphene Embedded Glass Fiber/epoxy Composites Using Time Temperature Superposition Principle," Composites Part A, Vol. 107, 2018, pp. 507-518.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.