최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기공업화학 = Applied chemistry for engineering, v.30 no.1, 2019년, pp.62 - 67
김영배 (고등기술연구원 플랜트엔지니어링 센터) , 김은주 (고등기술연구원 플랜트엔지니어링 센터) , 윤종혁 (고등기술연구원 플랜트엔지니어링 센터) , 송형운 (고등기술연구원 플랜트엔지니어링 센터)
This study was focused on the design and the performance analysis of integral Hot BoP for recovering waste heat from high-temperature exhaust gas in 2 kW class solid oxide fuel cell (SOFC). The hot BoP system was consisted of a catalytic combustor, air preheater and steam generator for burning the s...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
현재 SOFC의 고온 특성을 보완하기 위해 효율적인 시스템은 어떻게 구분되는가? | 이러한 SOFC의 고온 특성을 보완하기 위해 효율적인 시스템 구성을 통한 다양한 BoP (balance of plant)에 대한 공정연구의 필요성이 증가하고 있다[8]. 현재까지 보고된 BoP의 공정구성은 전력변환 및 시스템 제어를 구성하는 EBoP (electrical balance of plant)와 기계적 시스템 및 유로를 구성하는 MBoP (mechanical balance of plant)로 구분되며, 기계시스템 중 열원기기 및 열회수 기능을 담당하는 Hot BoP로 구분되고 있다[9]. | |
연료전지의 특징은 무엇인가? | 연료전지는 높은 효율로 전기를 생산할 수 있는 장점으로 인하여 종래의 화석연료를 대체할 새로운 발전시스템으로 주목되고 있다[1-3]. 이 연료전지 중, 고체산화물연료전지(solid oxide fuel cell, SOFC)는 높은 전기 생산 효율과 비귀금속계의 전극 사용 및 다양한 연료의 적용이 가능한 이점이 있다[4,5]. | |
고체산화물연료전지(solid oxide fuel cell, SOFC)의 장점은 무엇인가? | 연료전지는 높은 효율로 전기를 생산할 수 있는 장점으로 인하여 종래의 화석연료를 대체할 새로운 발전시스템으로 주목되고 있다[1-3]. 이 연료전지 중, 고체산화물연료전지(solid oxide fuel cell, SOFC)는 높은 전기 생산 효율과 비귀금속계의 전극 사용 및 다양한 연료의 적용이 가능한 이점이 있다[4,5]. 그러나 SOFC 시스템은 약 500~1,000 °C 사이에서 작동되는 고온 운전특성과 배기가스로 인한 열적 손실이 크다는 단점이 존재한다[6,7]. |
S. H. Jensen, C. Graves, M. Mogensen, C. Wendel, R. Braun, G. Hughes, Z. Gao, and S. A. Barnett, Large-scale electricity storage utilizing reversible solid oxide cells combined with underground storage of $CO_{2}$ and $CH_{4}$ , J. Energy Environ. Sci., 8, 2471-2479 (2015).
K. Lee and J. Kim, Performance enhancement and recovery method of open cathode PEMFC, J. Korean Ind. Eng. Chem., 28(1), 118-124 (2017).
K. S. Kim, M. K. Kim, D. K. Noh, Y. Tak, and S. H. Baeck, Synthesis of Pt-Bi/carbon electrodes by reduction method for direct methanol fuel cell, J. Korean Ind. Eng. Chem., 22(5), 479-485 (2011).
H. R. Ellamla, I. Staffell, P. Bujlo, B. G. Pollet, and S. Pasupathi, Current status of fuel cell-based combined heat and power systems for residential sector, J. Power Sources, 293, 312-328 (2015).
T. H. Kim, B. H. Ryu, and I. J. Lee, Ion-beam induced changes in the characteristics of Gd-doped ceria, Appl. Chem. Eng., 21(4), 401-404 (2010).
H. R. Rim, S. K. Jeong, and J. S. Lee, Characteristics of Pr1-xMxMnO3 (M Ca, Sr) as a cathode material of solid oxide fuel cell, J. Korean Ind. Eng. Chem., 7(6), 1125-1131 (1996).
S. Wongchanapai, H. Iwai, M. Saito, and H. Yoshida, Selection of suitable operating conditions for planar anode-supported direct-internal-reforming solid-oxide fuel cell, J. Power Sources, 204, 14-24 (2012).
S. S. Yu, D. J. Hong, Y. D. Lee, S. M. Lee, and K. Y. Ahn, Development of a catalytic combustor for a stationary fuel cell power generation system, Renew. Energy, 35(5), 1083-1090 (2010).
S. Wongchanapai, H. Iwai, M. Saito, and H. Yoshida, Performance evaluation of an integrated small-scale SOFC-biomass gasification power generation system, J. Power Sources, 216(15), 314-322 (2012).
H. Yoshida and H. Iwai, Thermal management in soild oxide fuel cell systems, proceedings of fifth international conference on enhanced, compact and ultra-compact heat exchangers: science, Engineering and Technology, Semtember 11-16, Hoboken, NJ, USA (2005).
R. Payne, J. Love, and M. Kah, Generating electricity at 60% electrical efficiency from 1-2 kWe SOFC products, J. Electrochem. Soc., 25(2), 231-239 (2009).
T. H. Yen, W. T. Hong, W. P. Huang, Y. C. Tsai, H. Y. Wang, C. N. Huang, and C. H. Lee, Experimental investigation of 1 kW solid oxide fuel cell system with a natural gas reformer and an exhaust gas burner, J. Power Sources, 195(5), 1454-1462 (2010).
T. G. Ghang, S. M. Lee, K. Y. Ahn, and Y. Kim, An experimental study on the reaction characteristics of a coupled reactor with a catalytic combustor and a steam reformer for SOFC systems, Int. J. Hydrogen Energy, 37(4), 3234-3241 (2012).
S. M. Lee, Y. D. Lee, K. Y. Ahn, D. J. Hong, and M. Y. Kim, A study on the design of MCFC off-gas catalytic combustor, Trans. Korean Hydrogen New Energy Soc., 18(4), 406-412 (2007).
S. M. Lee, Y. Lee, K. Y. Ahn, and S. S. Yu, Performance analysis of off-gas/syngas combustor for thermal management of high temperature fuel cell system, Trans. Korean Hydrogen New Energy Soc., 21(3), 193-200 (2010).
T. H. Lee, J. H. Choi, T. S. Park, Y. S. Yoo, and S. W. Nam, Design and self-sustainable operation of 1 kW SOFC system, Trans. Korean Hydrogen New Energy Soc., 20(5), 384-389 (2009).
T. H. Lee, Operation Results of the SOFC System Using 2 Sub-Module Stacks, Trans. Korean Hydrogen New Energy Soc., 21(5), 405-411 (2010).
J. P. Janssens, M. Dubuisson, and Y. D. Vos, Entropy considerations leading to a validated to the essence reduced model for SOFC and SOEC high temperature heat exchangers, Proceedings of 13th European SOFC & SOE Forum, July 3-6, Lucerne, Switzerland (2018).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.