최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Structural engineering and mechanics : An international journal, v.69 no.4, 2019년, pp.371 - 381
Yang, Jun-Mo (Department of Civil Engineering, Keimyung University) , Kim, Jin-Kook (Department of Civil Engineering, Seoul National University of Science and Technology)
A hybrid prestressed segmental concrete (HPSC) girder utilizing low carbon materials was developed in this paper. This paper introduces the hybrid prestressing concept of pre-tensioning the center segment and assembling all segments by post-tensioning, as well as the development process of the low c...
AASHTO (2017), AASHTO LRFD Bridge Design Specifications, American Association of State Highway and Transportation Officials, Washington, D.C., U.S.A.
ACI Committee 318 (2014), Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary, American Concrete Institute, Farmington Hills, Michigan, U.S.A.
ASTM C1609/C1609 M (2012), Standard Test Method for Flexural Performance of Fiber-reinforced Concrete (Using Beam with Third-Point Loading), ASTM International, West Conshohocken, Pennsylvania, U.S.A.
ASTM C39/39M (2014), Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, Pennsylvania, U.S.A.
ASTM C469/469M (2014), Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression, ASTM International, West Conshohocken, Pennsylvania, U.S.A.
ASTM C666/C666M (2015), Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing, ASTM International, West Conshohocken, Pennsylvania, U.S.A.
Barnett, S.J., Soutsos, M.N., Millard, S.G. and Bungey, J.H. (2006), "Strength development of mortars containing ground granulated blast-furnace slag: Effect of curing temperature and determination of apparent activation energies", Cement Concrete Res., 36(3), 434-440.
Borges, P.H.R., Costa, J.O., Milestone, N.B., Lynsdale, C.J. and Streatfield, R.E. (2010), "Carbonation of CH and CeSeH in composite cement pastes containing high amounts of BFS", Cement Concrete Res., 40, 284-292.
Briere, V., Harries, K.A., Kasanc, J. and Hagerd, C. (2013), "Dilation behavior of seven-wire prestressing strand-the Hoyer effect", Constr. Build. Mater., 40, 650-658.
British Standards Institution (2004), Eurocode 2: Design of Concrete Structures: Part 1-1: General Rules and Rules for Buildings, British Standards Institution.
CEN (2004), EN 1992-1-2 Eurocode 2: Design of Concrete Structures. Part 1-2: General Rules-Structural Fire Design Comite Europeen de Normalisation, Brussels, Belgium.
Gruyaert, E., Heede, P.V. and Belie, N.D. (2013), "Carbonation of slag concrete: Effect of the cement replacement level and curing on the carbonation coefficient effect of carbonation on the pore structure", Cement Concrete Compos., 35(1), 39-48.
Hamilton, H.R. and Brenkus, N.R. (2013), Long Spans with Transportable Precast Prestressed Girders, University of Florida (Sponsored by Florida Department of Transportation), Michigan, U.S.A.
Han, M.Y., Hwang, E.S. and Lee, C. (2003), "Prestressed concrete girder with multistage prestressing concept", ACI Struct. J., 100(6), 723-731.
KCI (2012), Korea Structural Concrete Design Code, Korea Concrete Institute, Seoul, Korea.
Kim, J.K., Seong, T.R., Jang, K.P. and Kwon, S.H. (2013), "Tensile behavior of new 2,200 MPa and 2,400 MPa strands according to various types of mono anchorage", Struct. Eng. Mech., 47(3), 383-399.
Kim, J.K., Yang, J.M. and Yim, H.J. (2016), "Experimental evaluation of transfer length in pretensioned concrete beams using 2,400-MPa prestressed strands", J. Struct. Eng., 142(11), 04016088.
KS D7002 (2018), Uncoated Stress-relieved Steel Wires and Strands for Prestressed Concrete, Korean Standards Association, Seoul, Korea.
KS F2456 (2013), Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing, Korean Standards Association, Seoul, Korea.
KS F2584 (2010), Standard Test Method for Accelerated Carbonation of Concrete, Korean Standards Association, Seoul, Korea.
KS F4042 (2012), Polymer Modified Cement Mortar for Maintenance in Concrete Structure, Korean Standards Association, Seoul, Korea.
Mahmoud, E., Ibrahim, A., El-Chabib, H. and Patibandla, V.C. (2013), "Self-consolidating concrete incorporating high volume of fly ash, slag, and recycled asphalt pavement", Int. J. Concrete Struct. Mater., 7(2), 155-163.
Marti-Vargas, J.R., Arbelaez, C.A., Serna, P., Navarro-Gregori, J. and Pallares-Rubio, L. (2007), "Anlaytical model for transfer length prediction of 13 mm prestressing strand", Struct. Eng. Mech., 26(2), 211-229.
Menendez, G.V.B.B., Bonavetti, V. and Irassar, E.F. (2003). "Strength development of ternary blended cement with limestone filler and blast-furnace slag", Cement Concrete Compos., 25(1), 61-67.
Ministry of Land, Infrastructure and Transportation (MLIT) (2005), Highway Bridge Design Specification, Ministry of Land, Infrastructure and Transportation, Korea.
Ministry of Land, Infrastructure and Transportation (MLIT) (2011), Railway Construction Specification, Ministry of Land, Infrastructure and Transportation, Korea.
Ministry of Land, Infrastructure and Transportation (MLIT) (2015), Railway Design Code, Ministry of Land, Infrastructure and Transportation, Korea.
Mitchell, D., Cook, W.D., Khan, A.A. and Tham, T. (1993), "Influence of high strength concrete on transfer and development length of pretensioning strand", PCI J., 38(3), 52-66.
Oh, B.H., Lim, S.N., Lee, M.K. and Yoo, S.W. (2014), "Analysis and prediction of transfer length in pretensioned, prestressed concrete members", ACI Struct. J., 111(3), 549-560.
Shin H.O., Yang, J.M., Yoon, Y.S. and Mitchell, D. (2016), "Mix design of concrete for prestressed concrete sleepers using blast furnace slag and steel fibers", Cement Concrete Compos., 74, 39-53.
Yang, J.M., Kim, J.K. and Yoo, D.Y. (2018), "Transfer length in full-scale pretensioned concrete beams with 1.4 m and 2.4 m section depths", Eng. Struct., 171, 433-444.
Yang, J.M., Yim, H.J. and Kim, J.K. (2016), "Transfer length of 2,400 MPa seven-wire 15.2 mm steel strands in high-strength pretensioned prestressed concrete beam", Smart Struct. Syst., 17(4), 577-591.
Yim, H.J., Yang, J.M. and Kim, J.K. (2018), "Improved prestressed concrete girder with hybrid segments system", Struct. Eng. Mech., 65(2), 183-190.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.