참고문헌 (35)

1. AASHTO (2017), AASHTO LRFD Bridge Design Specifications, American Association of State Highway and Transportation Officials, Washington, D.C., U.S.A. 

2. ACI Committee 318 (2014), Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary, American Concrete Institute, Farmington Hills, Michigan, U.S.A. 

3. ASTM C1609/C1609 M (2012), Standard Test Method for Flexural Performance of Fiber-reinforced Concrete (Using Beam with Third-Point Loading), ASTM International, West Conshohocken, Pennsylvania, U.S.A. 

4. ASTM C39/39M (2014), Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, Pennsylvania, U.S.A. 

5. ASTM C469/469M (2014), Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression, ASTM International, West Conshohocken, Pennsylvania, U.S.A. 

6. ASTM C666/C666M (2015), Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing, ASTM International, West Conshohocken, Pennsylvania, U.S.A. 

7. Barnett, S.J., Soutsos, M.N., Millard, S.G. and Bungey, J.H. (2006), "Strength development of mortars containing ground granulated blast-furnace slag: Effect of curing temperature and determination of apparent activation energies", Cement Concrete Res., 36(3), 434-440. 

   상세보기

8. Borges, P.H.R., Costa, J.O., Milestone, N.B., Lynsdale, C.J. and Streatfield, R.E. (2010), "Carbonation of CH and CeSeH in composite cement pastes containing high amounts of BFS", Cement Concrete Res., 40, 284-292. 

   상세보기

9. Briere, V., Harries, K.A., Kasanc, J. and Hagerd, C. (2013), "Dilation behavior of seven-wire prestressing strand-the Hoyer effect", Constr. Build. Mater., 40, 650-658. 

   상세보기

10. British Standards Institution (2004), Eurocode 2: Design of Concrete Structures: Part 1-1: General Rules and Rules for Buildings, British Standards Institution. 

11. CEN (2004), EN 1992-1-2 Eurocode 2: Design of Concrete Structures. Part 1-2: General Rules-Structural Fire Design Comite Europeen de Normalisation, Brussels, Belgium. 

12. Gruyaert, E., Heede, P.V. and Belie, N.D. (2013), "Carbonation of slag concrete: Effect of the cement replacement level and curing on the carbonation coefficient effect of carbonation on the pore structure", Cement Concrete Compos., 35(1), 39-48. 

    상세보기

13. Hamilton, H.R. and Brenkus, N.R. (2013), Long Spans with Transportable Precast Prestressed Girders, University of Florida (Sponsored by Florida Department of Transportation), Michigan, U.S.A. 

14. Han, M.Y., Hwang, E.S. and Lee, C. (2003), "Prestressed concrete girder with multistage prestressing concept", ACI Struct. J., 100(6), 723-731. 

    상세보기

15. Jeon, J.K., Moon, H.Y., Ann, K.Y., Kim, H.S. and Kim, Y.B. (2006), "Effect of ground granulated blast furnace slag, pulverized fuel ash, silica fume on sulfuric acid corrosion resistance of cement matrix", Int. J. Concrete Struct. Mater., 18(2E), 97-102. 

    원문보기 상세보기

16. KCI (2012), Korea Structural Concrete Design Code, Korea Concrete Institute, Seoul, Korea. 

17. Kim, J.K., Seong, T.R., Jang, K.P. and Kwon, S.H. (2013), "Tensile behavior of new 2,200 MPa and 2,400 MPa strands according to various types of mono anchorage", Struct. Eng. Mech., 47(3), 383-399. 

    상세보기

18. Kim, J.K., Yang, J.M. and Yim, H.J. (2016), "Experimental evaluation of transfer length in pretensioned concrete beams using 2,400-MPa prestressed strands", J. Struct. Eng., 142(11), 04016088. 

19. KS D7002 (2018), Uncoated Stress-relieved Steel Wires and Strands for Prestressed Concrete, Korean Standards Association, Seoul, Korea. 

20. KS F2456 (2013), Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing, Korean Standards Association, Seoul, Korea. 

21. KS F2584 (2010), Standard Test Method for Accelerated Carbonation of Concrete, Korean Standards Association, Seoul, Korea. 

22. KS F4042 (2012), Polymer Modified Cement Mortar for Maintenance in Concrete Structure, Korean Standards Association, Seoul, Korea. 

23. Mahmoud, E., Ibrahim, A., El-Chabib, H. and Patibandla, V.C. (2013), "Self-consolidating concrete incorporating high volume of fly ash, slag, and recycled asphalt pavement", Int. J. Concrete Struct. Mater., 7(2), 155-163. 

    상세보기

24. Marti-Vargas, J.R., Arbelaez, C.A., Serna, P., Navarro-Gregori, J. and Pallares-Rubio, L. (2007), "Anlaytical model for transfer length prediction of 13 mm prestressing strand", Struct. Eng. Mech., 26(2), 211-229. 

    상세보기

25. Menendez, G.V.B.B., Bonavetti, V. and Irassar, E.F. (2003). "Strength development of ternary blended cement with limestone filler and blast-furnace slag", Cement Concrete Compos., 25(1), 61-67. 

    상세보기

26. Ministry of Land, Infrastructure and Transportation (MLIT) (2005), Highway Bridge Design Specification, Ministry of Land, Infrastructure and Transportation, Korea. 

27. Ministry of Land, Infrastructure and Transportation (MLIT) (2011), Railway Construction Specification, Ministry of Land, Infrastructure and Transportation, Korea. 

28. Ministry of Land, Infrastructure and Transportation (MLIT) (2015), Railway Design Code, Ministry of Land, Infrastructure and Transportation, Korea. 

29. Mitchell, D., Cook, W.D., Khan, A.A. and Tham, T. (1993), "Influence of high strength concrete on transfer and development length of pretensioning strand", PCI J., 38(3), 52-66. 

30. Oh, B.H., Lim, S.N., Lee, M.K. and Yoo, S.W. (2014), "Analysis and prediction of transfer length in pretensioned, prestressed concrete members", ACI Struct. J., 111(3), 549-560. 

    상세보기

31. Shin H.O., Yang, J.M., Yoon, Y.S. and Mitchell, D. (2016), "Mix design of concrete for prestressed concrete sleepers using blast furnace slag and steel fibers", Cement Concrete Compos., 74, 39-53. 

    상세보기

32. Yang, J.M., Kim, J.K. and Yoo, D.Y. (2018), "Transfer length in full-scale pretensioned concrete beams with 1.4 m and 2.4 m section depths", Eng. Struct., 171, 433-444. 

    상세보기

33. Yang, J.M., Yim, H.J. and Kim, J.K. (2016), "Transfer length of 2,400 MPa seven-wire 15.2 mm steel strands in high-strength pretensioned prestressed concrete beam", Smart Struct. Syst., 17(4), 577-591. 

    상세보기

34. Yang, J.M., Yoo, D.Y., Kim, Y.C. and Yoon, Y.S. (2017), "Mechanical properties of steam cured high-strength steel fiber-reinforced concrete with high-volume blast furnace slag", Int. J. Concrete Struct. Mater., 11(2), 391-401. 

    원문보기 상세보기

35. Yim, H.J., Yang, J.M. and Kim, J.K. (2018), "Improved prestressed concrete girder with hybrid segments system", Struct. Eng. Mech., 65(2), 183-190.