$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

초록이 없습니다.

AI 본문요약
AI-Helper 아이콘 AI-Helper

* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.

문제 정의

  • 비구조재의 구조 성능을 평가하기 위한 연구는 풍하중에 대한 평가와 파손에 대한 연구1),5),16),17),18)가 주를 이루고 있으며, 지진에 대한 해석‧실험 연구는 그리 많지 않다. 따라서 기존 건축물의 외장재 일체화로 인한 문제점에 대한 효과적인 내진 보강 변위 추종 외장재를 설명하고자 한다.
  • 본고는 변위 발생에 대한 추종 성능의 개선과 이를 위한 클립형 철물을 이용한 외장재를 소개하였다. 소개된 외장 판넬은 지진이나 바람과 같은 수평 하중이 발생할 때의 구조 성능을 검토하였고, 외장재 손상과 추락 방지를 통한 2차 피해로부터의 안전 성 확보를 생각해 보았다.

가설 설정

  •  바람에 의한 변위 제한의 권장사항은 건물 높이의 1/500 에 해당되는 변위가 지진에 의한 허용 층간 변위를 만족할 경우 건축구조기준을 만족한다고 가정한다.
본문요약 정보가 도움이 되었나요?

질의응답

핵심어 질문 논문에서 추출한 답변
가공 방식에 따라 크게 알루미늄 복합 판넬과 금속 시트 판넬로 구분할 수 있는데 금속 시트 판넬은 무엇인가? 알루미늄 복합 판넬은 알루미늄 합금 판과 충진재 또는 합금 코어를 사용하여 판상으로 제조한 것이다. 금속 시트 판넬은 판상으로 제작된 아연 도금 강판 또는 알루미늄 판을 단일 금속 원판으로 절곡, 용 접, 연마, 도장하여 제조한 판넬이다. 이러한 외장재들은 절곡 공정으로 인해 나타나는 판의 굴곡 현상과 더불어 진동 흡수 기능이 없으므로 추락 위험성을 지니고 있다.
알루미늄 복합 판넬은 무엇인가? 기존 외장재는 가공 방식에 따라 크게 알루미늄 복합 판넬과 금속 시트 판넬로 구분할 수 있다. 알루미늄 복합 판넬은 알루미늄 합금 판과 충진재 또는 합금 코어를 사용하여 판상으로 제조한 것이다. 금속 시트 판넬은 판상으로 제작된 아연 도금 강판 또는 알루미늄 판을 단일 금속 원판으로 절곡, 용 접, 연마, 도장하여 제조한 판넬이다.
기존 외장재는 가공 방식에 따라 2가지로 구분하면? 기존 외장재는 가공 방식에 따라 크게 알루미늄 복합 판넬과 금속 시트 판넬로 구분할 수 있다. 알루미늄 복합 판넬은 알루미늄 합금 판과 충진재 또는 합금 코어를 사용하여 판상으로 제조한 것이다.
질의응답 정보가 도움이 되었나요?

참고문헌 (19)

  1. Cho, K. P., & Hong, S. I., "Wind Damages of Claddings of High-Rise Apartment Building under Strong Wind", Journal of Architectural Institute of Korea, Vol.22, No.2, pp.43-50, 2006 

  2. Lee, D. W., Kwak, E. S., Shon, S. D., & Lee, S. J., "A Study on Horizontal Displacement Following Ability of Welded and Non-welded Building Hardware", Journal of Korean Association for Spatial Structures, Vol.16, No.4, pp.75-82, 2016 

  3. Kim, Y. S. (1996). A study on following capacity for metal panel curtain wall subjected to the horizontal displacement (Master's thesis). Soongsil University, Republic of Korea. 

  4. Lee, S. I., "Manual to Manufacturing Process for Curtain Wall", Journal of Architectural Institute of Korea, Vol.47, No.9, pp.44-50, 2003 

  5. Lee, Y. W., Yeun, K. W., & Kim, J. (2010). The Analysis of Wind Load on Curtain Wall Member of the Building. Proceeding of the Architectural Institute of Korea Autumn Conference, Republic of Korea, Vol.30, No.1, pp.37-38 

  6. Yim, H. C., Youn, K. J., Kim, J. H., & Park, J. H. (2010). Structural Performance Evaluation of Steel-Aluminum Unit Curtain-Walls for Super Tall Buildings. Proceedings of Architectural Institute of Korea, Republic of Korea, Vol.30, No.1, pp.109-110 

  7. Kwak, E. S., Jeong, G. M., Ki, C. G., Lee, S. H., & Lee, S. J. (2016). The Study on Structural Performance Review of Displacement Absorbing Performance Improvement Exterior Panel Utilizing Moving Clips. Proceedings of the Korea Institute for Structural Maintenance and Inspection Spring Annual Conference, Republic of Korea, Vol.20, No.1, pp.269-270 

  8. Lee, K. S., "A Development of Seismic Rehabilitation Method of RC Buildings Strengthened with X-Bracing Using Carbon Fiber Composite Cable", Journal of the Korea Institute for Structural Maintenance and Inspection, Vol.18, No.3, pp.1-9, 2014 

  9. Korea Meteorological Administration, Earthquake URL: http://www.kma.go.kr/weather/earthquake_volcano/report.jsp, 2016 

  10. Kim, K. S., "Wind Load on Tall Building", Journal of Architectural Institute of Korea, Vol.35, No.1, pp.29-32, 1991 

  11. Cho, Y. W. (2008). A Study on the Development of Structural Performance Evaluation Process/Manual for a Super High-Rise Building Curtain Wall System from the Construction, Manager's Perspective (Master's thesis). Seoul National University of Science and Technology, Republic of Korea. 

  12. Jeon, E. K., & Kim, H. J. (2010). A Study on Structural Design of Aluminum Curtain Walls - Focused on Mullions and Transoms. Proceedings of the Regional Association of Architectural Institute of Korea, Republic of Korea, Vol.2010, No.01, pp.285-289 

  13. Lee, Y. O. (2011). A Study on the Economical Structual Design Method of Aluminum Curtain Wall System: Focusing on Mullion (Master's thesis). Seoul National University of Science and Technology, Republic of Korea. 

  14. Min, S. H., Jang, Y. J., Sa, J. C., Lee, J. M., Yun, J. E., ... Kim, Y. H. (2012). A Survey about Installation Trend for Exterior in Domestic. Proceedings of the Korean Institute of Fire Science & Engineering Spring Annual Conference, Republic of Korea, pp.11-14 

  15. Chang, K. K., & Park, N. W., "Development and Performance Evaluation of Under Cut Anchor Stone Curtain Wall Construction Method", Journal of the Korea Institute for Structural Maintenance and Inspection, Vol.18, No.4, pp.138-146, 2014 

  16. Ham, H. J., & Kim, Y. S., "Cladding System Failure by Strong Wind and its Mitigation Methods", Journal of Architectural Institute of Korea, Vol.48, No.7, pp.51-55, 2004 

  17. Cho, K. P., Hong, S. I., & Kim, W. S., "Wind-Resistant Design of High-rise Apartment Building Glasses", Journal of Architectural Institute of Korea, Vol.22, No.1, pp.77-85, 2006 

  18. Shim, H. B., Kim, D. W., Jeon, H. S., & Lee, J. H., "Application of Wind Tunnel Test for the Exterior and Serviceability Enhancement of Jeju City Hotel", Journal of Architectural Institute of Korea, Vol.57, No.1, pp.86-90, 2013 

  19. Kwak, E. S., Ki, C. G., Lee, S. H., Shon, S. D., & Lee, S. J., "A Study on the Structural Performance of the Building Exterior Panel Using the Moving Clips", Journal of the Architectural Institute of Korea Structures & Construction, Vol.33, No.12, pp.29-36, 2017 

저자의 다른 논문 :

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로