최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국산업정보학회논문지 = Journal of the Korea Industrial Information Systems Research, v.24 no.2, 2019년, pp.15 - 23
투덴수런 오운자르갈 (창원대학교 전기공학과) , 고병수 (창원대학교 전기공학과) , 성해진 (창원대학교 전기공학과) , 박민원 (창원대학교 전기공학과) , 유인근 (창원대학교 전기공학과)
High temperature superconducting (HTS) generators for wind power systems are attractively researched with the advantages of high efficiency and smaller size compared with conventional generator. However, the HTS generators have high Lorentz force problem, which acts on HTS field coils due to their h...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Polinder, H., Van der Pijl, F.F.A., De Vilder, G.J. and Tavner, P.J., “Comparison of direct drive and geared generator concepts for wind turbines,” IEEE Transactions on Energy Conversion, Vol. 21, No. 3, pp. 725-733, 2006.
McDonald, A., "Structural analysis of low speed, high torque electrical generators for direct drive renewable energy converters," Ph.D. dissertation, School of Engineering & Electronics, University of Edinburgh, 2008.
Young, G.P., Woo, S.L., Jeyull, L., Seunghyun, S., Young, J.H., Yoon, D.C. and Tae, K.K., "Operational characteristics of HTS coils with flux diverters in semipersistent mode under alternating magnetic field," IEEE Transactions on Applied Superconductivity, Vol. 26, No. 4, Art. No. 5204105, 2016.
Hiroyuki, O., Yutaka, T., Rashidul, M.Q. and Masaki, S., "Electromagnetic characteristics of 10 MW class superconducting wind turbine generators," IEEE Electrical Machine and System (ICEMS), pp.1303-1306, 2010.
Klaus, G., Wilke, M., Frauenhofer, J., Nick, W. and Neumuller, H.W., "Design challenges and benefits of HTS synchronous machines," IEEE Power & Energy Society General Meeting, pp. 1-8, 2007.
Oomen, M., Herkert, W., Bayer, D., Kummeth, P., Nick, W. and Arndt. T., "Manufacturing and test of 2G HTS coils for rotating machines: challenges, conductor requirements, realization," Physica C: Superconducting, Vol. 482, pp. 111-118, 2012.
Go, B.S., Sung, H.J., Choi, J., Park, M. and Yu, I.K., "Modularization of the HTS field coils for a large scale superconducting generator," IEEE Transactions on Applied Superconductivity, Vol. 26, No. 3, Art. No. 5202905, 2016.
Zhang, W., Xia, D. and Dong, Z., "Analysis of the strain and stress in the HTS generator at different operating conditions," IEEE Transactions on Applied Superconductivity, Vol. 27, No. 4, Art. No. 5203405, 2017.
Weise, K., Schmidt, R., Carlstedt, M., Ziolkowski, M., Brauer, H. and Toepfer, H., "Optimal magnet design for Lorentz force eddy-current testing," IEEE Transactions on Magnetics, Vol. 51, No. 9, Art. No. 6201415, 2015.
Wahl, L., Maas, S., Waldmann, D., Zurbes, A. and Freres, P., "Shear stresses in honeycomb sandwich plates: Analytical solution, finite element method and experimental verification," Journal of Sandwich Structure and Materials, Vol. 14, pp. 449-468, 2012.
Kiruba, S.H., Swarn, K., Tabea A. and Ernst, W.S., "High power density supercoducting rotating machines development status and technology roadmap," Superconducting Science and Technology, Vol. 30, Art. No. 123002, 2017.
Han, W. C. and Kiruba, S., "Force analysis of superconducting coils in actively shielded air-core superconducting machines" IEEE Transactions on Applied Superconductivity, Vol. 28, No. 5, Art. No. 5206808, 2018.
Rouhollah, S. and Fatemeh, A., "Design of a combined screening and damping layer for a 10 MW class wind turbine HTS synchronous generator," IEEE Transactions on Applied Superconductivity, Vol. 28, No. 6, Art. No. 5208312, 2018.
http://www.theva.com/products (Accessed on November 9th, 2018)
Go, B.S., Sung, H.J., Park, M. and Yu, I.K., "Structural design of a module coil for a 12 MW class HTS generator for wind turbine," IEEE Transactions on Applied Superconductivity, Vol. 27, No. 4, Art. No. 5202405, 2017.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.