최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.18 no.5, 2019년, pp.66 - 73
박재경 (경상대학교 제어계측공학과(ERI)) , 김갑순 (경상대학교 제어계측공학과(ERI))
In this paper, we design a new automatic workpiece loading system for the loading and unloading of a workpiece for a CNC lathe. Conventional workpiece loading systems are bulky and require a large area when installed around a shelf. Therefore, an automatic loading system with small horizontal and ve...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
CNC 선반은 무엇인가? | 4차 산업혁명의 핵심인 스마트공장(smart factory)에서 CNC(Computer Numerical Control) 선반은 매우 중요한 구성요소 중에 하나이다. 이 선반은 공작물을 자동으로 가공하는 기계이고, 생산 성을 향상시키기 위해 공작물을 선반의 척에 장착 (loading)하고 탈착(unloading)하는 로봇이 있다. 이로봇들은 겐츄리 로봇(gantry robot), 산업용 로봇(industry robot), 스카라 로봇(scara robot) 등이 있다. | |
CNC 선반의 생산성을 향상시키기 위한 로봇은? | 4차 산업혁명의 핵심인 스마트공장(smart factory)에서 CNC(Computer Numerical Control) 선반은 매우 중요한 구성요소 중에 하나이다. 이 선반은 공작물을 자동으로 가공하는 기계이고, 생산 성을 향상시키기 위해 공작물을 선반의 척에 장착 (loading)하고 탈착(unloading)하는 로봇이 있다. 이로봇들은 겐츄리 로봇(gantry robot), 산업용 로봇(industry robot), 스카라 로봇(scara robot) 등이 있다. | |
겐츄리 로봇을 이용하여 공작물을 장착과 탈착을 하기 위한 자동정렬 및적재장치의 기능과 단점은? | Lee [1] 는 선반에 부착된 겐츄리로봇을 이용하여 공작물을 장착과 탈착을 하기 위한 자동정렬 및적재장치를 설계하였다. 이장치는 겐츄리 로봇이 잡을 수 있도록 정해진 위치에 공작물을 자동으로 위치시키는 기능과 직경이 100mm이고 높이가 100mm인 공작물을 56개를 적재 능력을 가지고 있으나 장치의 크기(2476×838×804mm)가 크다는 단점을 가지고 있다. 즉, 이 자동정렬 및 적재장치는 하나의 선반에 가공전 공작물과 가공후 공작물을 위해 두 대가 설치되어야 하므로 넓은 설치공 간이 필요한 단점을 가지고 있다. |
Kulkarni, R., Shivakumar, S. and Krao, R., "Productivity Improvement on a CNC Lathe by Automatic Loading and Unloading of Throttle Valve Component", International Journal of Scientific & Engineering Research, Vol. 2, No. 12, pp. 1-7, 2011.
Park, H. M., Jun, J. U. and Lee, S. J., "Design of Slide-Type Automatic Pallet Changer for M/C by Simulation", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 6, pp. 111-121, 2015.
Lee, M. K., Joo, P. J., Lee, E .S. and Kim, N. S., "A Study on the Z axis Defection Compensation of the Cross rail for Gantry type Machine tools", The Korean Society of Manufacturing Technology Engineers, Vol. 20, No.3, pp. 357-360, 2011.
Sawodny, O., Aschemann, H. and Lahres, S., "An automated gantry crane as a large workspace robot", Control Engineering Practice, Vol. 10, No. 12, pp. 1323-1338, 2002.
Kim, J. D., Cho, C. S., Kim, B. S., Kim, K. H. and Park, K. J., "A Study on the safety of high-speed and heavy-duty 3 axis gantry robot," Korean Society Of Precision Engineering, Annual Spring Conference vol. 1, pp. 337-338, 2011.
Park, J. B. and Lee, E. S., "Dynamic Structure Analysis for the Large Gantry Type Machine Tool", The Korean Society of Manufacturing Technology Engineers, The International Conference on Manufacturing Technology Engineers, pp. 201, 2012.
Yang, J. B., Jiang, L .J., and Chen, D. C., "Dynamic modelling and control of a rotating Euler-Bernoulli beam", Journal of Sound and Vibration, Vol. 274, No. 3-5, pp. 863-875, 2004.
Jang, U. I., Noh, M. S., Jeong, S. H. and Hong, D. S., "Static and Dynamic Analysis for 3Axis Articulated Robot for Gantry System", Korean Society Of Precision Engineering, Annual Fall Conference, pp. 503-504, 2008.
Gomez-Acedo, E., Olarra, A., Lopez, L. N., "A method for thermal characterization and modeling of large gantry-type machine tools", The International Journal of Advanced Manufacturing Technology, Vol. 62, No. 9-12, pp. 875-886, 2012.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.