최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국구조물진단유지관리공학회 논문집 = Journal of the Korea Institute for Structural Maintenance and Inspection, v.23 no.7, 2019년, pp.58 - 65
김정진 (롯데건설 기술연구원) , 심학보 (롯데건설 기술연구원)
Polymer concrete is expected to be widely used as a building material because it has a shorter hardening time and excellent compression, tensile, bending, bond strength, frictional resistance and abrasion loss compared to general concrete. The polymer concrete has excellent vibration damping perform...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
폴리머 콘크리트의 장점은? | 최근 콘크리트 구조물이 초고층화, 대형화 되어감에 따라, 고급형 구조물에 적합한 고품질의 콘크리트 개발이 요구되고 있는데, 콘크리트는 강도 및 내구성능은 우수한 반면, 최근 사회 문제화 되고 있는 층간소음 및 구조물 진동과 관련해서는 진동 감쇠성능이 작아 문제 시 되고 있다. 한편, 에폭시 계열 합성수지와 골재를 혼합한 폴리머 콘크리트에 대한 연구가 활발히 진행되고 있는데, 이러한 폴리머 콘크리트는 일반 콘크리트에 비해 경화시간이 짧고, 압축, 인장, 휨, 부착강도, 마찰저항성, 마모도 등이 우수해 건축 재료로써 폭넓은 활용이 기대되고 있다(Wang et al.,2003; Cortes et al. | |
폴리머 콘크리트란? | 최근 콘크리트 구조물이 초고층화, 대형화 되어감에 따라, 고급형 구조물에 적합한 고품질의 콘크리트 개발이 요구되고 있는데, 콘크리트는 강도 및 내구성능은 우수한 반면, 최근 사회 문제화 되고 있는 층간소음 및 구조물 진동과 관련해서는 진동 감쇠성능이 작아 문제 시 되고 있다. 한편, 에폭시 계열 합성수지와 골재를 혼합한 폴리머 콘크리트에 대한 연구가 활발히 진행되고 있는데, 이러한 폴리머 콘크리트는 일반 콘크리트에 비해 경화시간이 짧고, 압축, 인장, 휨, 부착강도, 마찰저항성, 마모도 등이 우수해 건축 재료로써 폭넓은 활용이 기대되고 있다(Wang et al.,2003; Cortes et al. | |
폴리머 콘크리트의 연구가 활발해진 배경은? | 최근 콘크리트 구조물이 초고층화, 대형화 되어감에 따라, 고급형 구조물에 적합한 고품질의 콘크리트 개발이 요구되고 있는데, 콘크리트는 강도 및 내구성능은 우수한 반면, 최근 사회 문제화 되고 있는 층간소음 및 구조물 진동과 관련해서는 진동 감쇠성능이 작아 문제 시 되고 있다. 한편, 에폭시 계열 합성수지와 골재를 혼합한 폴리머 콘크리트에 대한 연구가 활발히 진행되고 있는데, 이러한 폴리머 콘크리트는 일반 콘크리트에 비해 경화시간이 짧고, 압축, 인장, 휨, 부착강도, 마찰저항성, 마모도 등이 우수해 건축 재료로써 폭넓은 활용이 기대되고 있다(Wang et al. |
W. G. Wong, Ping Fang, J. K. Pan. (2003), Dynamic properties impact toughness and abrasiveness of polymer-modified pastes by using nondestructive tests, Cement and Concrete Research, 33(9), 1371-1374.
F. Cortes and G. Castillo. (2007), Comparison between the dynamical properties of polymer concrete and grey cast iron for machine tool applications, Material and Design, 28(5), 1461-1466.
J. Wongpa, K. Kiattikomol, C. Jaturapitakkul, Chindaprasirt. (2007), Compressive strength, modulus of elasticity, and water permeability of inorganic polymer concrete, Material and Design, 31(10), 4748-4754.
Rajoria, H., and Jalili, N. (2005), Passive Vibration Damping Enhancement Using Carbon Nanotube-epoxy Reinforced Composites, Composites Science and Technology, 65(14), 2079-2093.
Wang, J. C., and Zeng. X. (2006), Influence of Temperature and Pressure on the Dynamic Properties of Rubber-modified Asphalt Concrete, Journal of Materials in Civil Engineering, 18(1), 125-131.
Jeon, W., and Lee, J. Y. (2016), Efficient Damping of Vibration Using and Acoustic Black Hole, Proceedings of the KSNVE 2016 annual Spring Conference, 202-203.
Lee, W. H., Ivan, R., Haan, C. H., Han, S. H. (2009), Pilot Experiments of Estimated Proper Ratio of Latex Polymer Concrete for Reducing Floor Impact Sound, Proceedings of the KSNVE Annual Spring Conference, 532-533.
Cho, H. N.(2000), Flexural Behavior of Damaged Reinforced Concrete Beams repaired wity Epoxy Mortar, Master's Thesis of Ewha University.
Kwon, S. M, Ahn, S. K, Koh, H, I and Park, J, H. (2018), Analysis of Dynamic characteristics of complex polymer concrete according to structure of polymer concrete, Proceedings of the KSNVE 2018 annual Spring Conference, 202.
C. Y. Park and B. Y. Sohn.(1997), Estimation of loss energy from the measurement returning time of rebound for carbon black-filled natural rubber compounds, Journal of Korean Inst. Chem. Eng, 35, 154.
Saliba, J., Roziere, E., Grondin, F., and Loukill, A. (2011), Influence of Shrinkage-Reducing Admixture on Plastic and Long-Term Shrinkage, Cement and Concrete Composites, 33(2), 209-217.
Kobayashi, T and Ohama Y. (1984), Low-Temperature Curing of Polymethyl Methacrylate Polymer Concrete, Transportation Research Record 1003, Transportation Research Board(ISSN: 0361-1981), 15-18.
Ahn, N., Park, D. K,. Lee, J and Lee, M. K. (2009), Structureal Test of Precast Polymer Concrete, Journal of Applied Polymer Science, 114(3), 1370-1376.
Ahmad, S., Elahi, A., Barbhuiya, S. A., and Farid, Y. (2012), Use of Polymer modified mortar in controlling cracks in reinforced concrete beams, Construction and Building Materials, 27, 91-96.
Joo, M. J., Lee, Y. S., Hong, G. S., Hong, Y. K., and Choi, O. C. (1997), An Evaluation on the Flexural Strength of Concrete Beams Repaired by Polymer resin, Korea Institute for Structural Maintenance and Inspection, 1(10, 107-112.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.