최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기공업화학 = Applied chemistry for engineering, v.30 no.3, 2019년, pp.297 - 302
안동해 (충남대학교 응용화학공학과) , 김경훈 (충남대학교 응용화학공학과) , 김종구 (충남대학교 응용화학공학과) , 이영석 (충남대학교 응용화학공학과)
In order to investigate structural changes of the pyrolysis fuel oil (PFO), the volatile matters and heavy oil fractions were separated from PFO by heat treatment temperature. As a result of
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
잔사유의 특징은? | 석유화학공정에서 부생되는 잔사유는 나프탈렌, 안트라센 등 방향족 화합물을 대량 포함하고 있으며, 열중합을 통하여 탄소 육각망면을 쉽게 형성할 수 있기 때문에 탄소섬유, 코크스, 인조흑연 등 탄소 재료의 전구체로서 많이 활용되고 있다[1-6]. 이러한 석유계 잔사유에는 대표적으로 열분해 연료유(pyrolysis fuel oil, PFO), FCC-DO (flui- dized catalyst cracking decant oil), 감압 잔사유(vacuum residue, VR) 등이 있다. | |
열분해 연료유의 특징은 무엇인가? | 이러한 석유계 잔사유에는 대표적으로 열분해 연료유(pyrolysis fuel oil, PFO), FCC-DO (flui- dized catalyst cracking decant oil), 감압 잔사유(vacuum residue, VR) 등이 있다. 이 중 PFO는 200 Da 내외의 낮은 분자량 분포를 갖는 것으로 알려져 있으며, 지방족 탄화수소 작용기가 매우 불규칙적으로 붙어있는 나프탈렌(naphthalene)계 2환 방향족 화합물을 주성분으로 하고 있다[7-12]. 방향족 화합물의 곁사슬(sidechain)로 결합되어 있는 지방족 탄화수소 작용기들은 피치 제조 공정 간 크래킹 반응에 의하여 대부분 제거되는 것으로 알려져 있다. | |
석유계 잔사유의 종류는 무엇인가? | 석유화학공정에서 부생되는 잔사유는 나프탈렌, 안트라센 등 방향족 화합물을 대량 포함하고 있으며, 열중합을 통하여 탄소 육각망면을 쉽게 형성할 수 있기 때문에 탄소섬유, 코크스, 인조흑연 등 탄소 재료의 전구체로서 많이 활용되고 있다[1-6]. 이러한 석유계 잔사유에는 대표적으로 열분해 연료유(pyrolysis fuel oil, PFO), FCC-DO (flui- dized catalyst cracking decant oil), 감압 잔사유(vacuum residue, VR) 등이 있다. 이 중 PFO는 200 Da 내외의 낮은 분자량 분포를 갖는 것으로 알려져 있으며, 지방족 탄화수소 작용기가 매우 불규칙적으로 붙어있는 나프탈렌(naphthalene)계 2환 방향족 화합물을 주성분으로 하고 있다[7-12]. |
M. S. Park, S. Cho, E. Jeong, and Y.-S. Lee, Physico-chemical and electrochemical properties of pitch-based high crystallinity cokes used as electrode material for electric double layer capacitor, J. Ind. Eng. Chem., 23, 27-32 (2015).
K. H. Kim, D. An, J. W. Kim, and Y.-S. Lee, The effect of fluorination on wettability between cokes and binder pitch for carbon block with high density, Appl. Chem. Eng., 29, 677-681 (2018).
J. G. Kim, J. H. Kim, B. C. Bai, Y. J. Choi, J. S. Im, T.-S. Bae, and Y.-S. Lee, Influence of kneading ratio on the blending interaction of coke aggregates on manufacturing a carbon block, Carbon Lett., 28, 24-30 (2018).
J. G. Kim, F. Liu, C.-W. Lee, Y.-S. Lee, and J. S. Im, Boron-doped carbon prepared from PFO as a lithium-ion battery anode, Solid State Sci., 34, 38-42 (2014).
B. C. Bai, J. G. Kim, J. H. Kim, C. W. Lee, Y.-S. Lee, and J. S. Im, Blending effect of pyrolyzed fuel oil and coal tar in pitch production for artificial graphite, Carbon Lett., 25, 78-83 (2018).
J. G. Kim, J. H. Kim, B.-J. Song, C. W. Lee, Y.-S. Lee, and J. S. Im, Empirical approach to determine molecular weight distribution using MALDI-TOF analysis of petroleum-based heavy oil, Fuel, 186, 20-23 (2016).
A. Cristadoro, S. U. Kulkarni, W. A. Burgess, E. G. Cervo, H. J. Rader, K. Mullen, D. A. Bruce, and M. C. Thies, Structural characterization of the oligomeric constituents of petroleum pitches, Carbon, 47, 2358-2370 (2009).
M. Ghashghaee, Predictive correlations for thermal upgrading of petroleum residues, J. Anal. Appl. Pyrolysis, 115, 326-336 (2015).
P. Alvarez, N. Diez, C. Blanco, R. Santamaria, R. Menendez, and M. Granda, An insight into the polymerization of anthracene oil to produce pitch using nuclear magnetic resonance, Fuel, 105, 471-476 (2013).
Y. Cheng, C. Fang, J. Su, R. Yu, and T. Li, Carbonization behavior and mesophase conversion kinetics of coal tar pitch using a low temperature molten salt method, J. Anal. Appl. Pyrolysis., 109, 90-97 (2014).
J.-S. Hwang, C.-H. Lee, K.-H. Cho, M.-S. Kim, C.-J. Kim, S.-K. Ryu, and B.-S. Rhee, Preparation of anisotropic/isotropic pitches from NCC-PFO, Korean J. Chem. Eng., 33, 551-558 (1995).
K. H. Kim, S. Lee, D. An, and Y.-S. Lee, Effect of ${\beta}$ -resin of petroleum-based binder pitch on density of carbon block, Appl. Chem. Eng., 28, 432-436 (2017).
M.-J. Jung, J.-Y. Jung, D. Lee, and Y.-S. Lee, A new pitch reforming from pyrolysis fuel oil by UV irradiation, J. Ind. Eng. Chem., 22, 70-74 (2015).
S. W. Seo, J. H. Kim, Y.-S. Lee, and J. S. Im, Identification of synthesized pitch derived from pyrolyzed fuel oil (PFO) by pressure, Appl. Chem. Eng., 29, 652-656 (2018).
J. G. Kim, J. H. Kim, J. S. Im, Y.-S. Lee, and T.-S. Bae, Empirical study of petroleum-based pitch production via pressureand temperature- controlled thermal reactions, J. Ind. Eng. Chem., 62, 176-184 (2018).
J. G. Kim, J. H. Kim, B.-J. Song, Y. P. Jeon, C. W. Lee, Y.-S. Lee, and J. S. Im, Characterization of pitch derived from pyrolyzed fuel oil using TLC-FID and MALDI-TOF, Fuel, 167, 25-30 (2016).
Y. Zhu, X. Zhao, L. Gao, and J. Cheng, Pyrolysis kinetics and microstructure of thermal conversion products on toluene soluble component from two kinds of modified pitch, Carbon Lett., 28, 38-46 (2018).
S. L. Silva, A. M. S. Silva, J. C. Ribeiro, F. G. Martins, F. A. D. Silva, and C. M. Silva, Chromatographic and spectroscopic analysis of heavy crude oil mixtures with emphasis in nuclear magnetic resonance spectroscopy: A review, Anal. Chim. Acta, 707, 18-37 (2011).
V. J. Mayani, S. V. Mayani, Y. Lee, and S.-K. Park, A non-chromatographic method for the separation of highly pure naphthalene crystals from pyrolysis fuel oil, Sep. Purif. Technol., 80, 90-95 (2011).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.