국내 범용 비철금속의 2014-2018 년간 수요 공급과 스크랩 리싸이클링 현황 조사 A Review on the Demand and Supply of Major Non-Ferrous Metals and their Recycling of Scraps during 2014-2018 in Korea원문보기
비철금속의 국내 수요 공급과 스크랩들의 리싸이클링 현황을 파악하는 것은 자원재활용 관련업계와 연구자들에게 매우 필요한 일이다. 국내에서는 10여 년 전부터 한국자원리싸이클링학회지를 통하여 3~5년 주기로 주요 비철금속의 수급과 스크랩 리싸이클링 현황을 조사, 발표하고 있는데, 전체 비철금속에 대해서 조사하기에는 분량이 너무 방대하여 사용량이 많은 범용 비철금속과 그 스크랩들에 국한하여 발표하고 있다. 본 조사연구에서는 기존 조사대상인 동, 알루미늄, 아연, 연, 니켈, 마그네슘 6종에 주석을 추가하여 총 7종의 비철금속에 대하여 관세청 수출입 통계와 한국비철금속협회 자료 및 비철산업 관련 정보지들을 통해서 최근 5년 (2014 ~ 2018년) 간의 국내 수급 현황을 조사하였고 이를 토대로 그 스크랩들의 재활용율을 추정하였다.
비철금속의 국내 수요 공급과 스크랩들의 리싸이클링 현황을 파악하는 것은 자원재활용 관련업계와 연구자들에게 매우 필요한 일이다. 국내에서는 10여 년 전부터 한국자원리싸이클링학회지를 통하여 3~5년 주기로 주요 비철금속의 수급과 스크랩 리싸이클링 현황을 조사, 발표하고 있는데, 전체 비철금속에 대해서 조사하기에는 분량이 너무 방대하여 사용량이 많은 범용 비철금속과 그 스크랩들에 국한하여 발표하고 있다. 본 조사연구에서는 기존 조사대상인 동, 알루미늄, 아연, 연, 니켈, 마그네슘 6종에 주석을 추가하여 총 7종의 비철금속에 대하여 관세청 수출입 통계와 한국비철금속협회 자료 및 비철산업 관련 정보지들을 통해서 최근 5년 (2014 ~ 2018년) 간의 국내 수급 현황을 조사하였고 이를 토대로 그 스크랩들의 재활용율을 추정하였다.
It is very necessary for the metal recycling industries and the researchers to understand the current status of demand and supply of non-ferrous metals and their scraps. Domestic demand and supply of non-ferrous metals and their scraps have been surveyed and reported on the journal of the Korean Ins...
It is very necessary for the metal recycling industries and the researchers to understand the current status of demand and supply of non-ferrous metals and their scraps. Domestic demand and supply of non-ferrous metals and their scraps have been surveyed and reported on the journal of the Korean Institute of Resources Recycling since ten years before. However, it was confined to six major non-ferrous metals such as copper, aluminum, zinc, lead, nickel and magnesium because there are so many kind of non-ferrous metals. In this article also, demand and supply of these non-ferrous metals in addition tin during recent five years (2014 ~ 2018) in Korean markets were reviewed, and their recycling ratio of scraps were briefly estimated. The statistical data were mainly cited from the data issued by Korea Customs Service (KCS) and Korea Non-Ferrous Metal Association, and some fragmental published review articles from magazines and other technical reports.
It is very necessary for the metal recycling industries and the researchers to understand the current status of demand and supply of non-ferrous metals and their scraps. Domestic demand and supply of non-ferrous metals and their scraps have been surveyed and reported on the journal of the Korean Institute of Resources Recycling since ten years before. However, it was confined to six major non-ferrous metals such as copper, aluminum, zinc, lead, nickel and magnesium because there are so many kind of non-ferrous metals. In this article also, demand and supply of these non-ferrous metals in addition tin during recent five years (2014 ~ 2018) in Korean markets were reviewed, and their recycling ratio of scraps were briefly estimated. The statistical data were mainly cited from the data issued by Korea Customs Service (KCS) and Korea Non-Ferrous Metal Association, and some fragmental published review articles from magazines and other technical reports.
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
제안 방법
본 조사 보고에서는 기존에 발표했던 동, 알루미늄, 아연, 연, 니켈, 마그네슘 6종의 비철금속에 주석을 추가하여 총 7종의 범용 비철금속과 그 스크랩들에 대하여 관세청 수출입 통계와 한국비철금속협회 자료 및 비철산업 관련 정보지들을 통해서 최근 5년(2014 ~ 2018 년) 간의 국내 수요 공급 현황을 조사하고 이를 근거로 스크랩들의 재활용율을 추정하였다.
수량 면에서 많이 사용되고 산업적으로도 중요한 동, 알루미늄, 아연, 연, 니켈, 주석 및 마그네슘과 같은 7 종의 범용 비철금속에 대하여 국내의 수급현황을 조사 하고 스크랩들의 재활용율을 추정 산출하여 보았다. 조사 결과 2018년 이들 비철금속의 재활용율이 동 25.
여기서는두 가지를 모두 고려하여 리싸이클링 현황을 검토하였으며, Table 1의 수급통계와 Table 3의 스크랩 수출입 통계를 참조하여 리싸이클링율(Recycling Ratio: R.R.) 을 국내수요량 대비 재생지금생산량으로 추정 계산하였다(R.R. ≡ 재생지금생산량/국내수요량 × 100 %).
연간 40만 톤 이상 발생되고 있는 제강분진(Zn 품위약 28 %)으로부터 연간 10만 톤 이상의 조산화아연 (ZnO 품위: 60 ~ 67 %)을 생산할 수 있기 때문에 2013년부터 (주)베페사징크코리아(Befesa Zinc Korea Co.)에서 Waelz Kiln Process에 기초한 HKZ Process를 개발하고 이를 사업화하였다10). 또, 2014년부터는 영국의 Zinc Co.
대상 데이터
2014년부터 2018년까지 최근 5년간의 주요 비철금속 일차지금(ingot)의 수급동향을 Table 1에 요약 기술하였다. 이 표는 주로 대한민국관세청 수출입통계5)와 한국 비철금속협회의 집계자료6) 에 근거하여 작성한 것으로서, 국내 비철금속 주요 품목별 지금(ingot) 생산능력(producing capacity)은 2018년도에 전기동 705천 톤/년, 아연 1,060천 톤/년, 연 904천 톤/년(전기연: 500천 톤, 재생연: 404천 톤), 니켈 92천 톤/년이며, 마그네슘은 재생금속 약 22천 톤/년 정도로 파악된다.
알루미늄 괴의 내수는 2014년에 알루미늄 압연업체의 생산증가로 지금 수요가 1,490천 톤에 이르렀는데, 이 수요가 지속적으로 유지되어 2018년에도 일차지금 수요가 1,456,500 톤으로 집계되었다. 또, 알루미늄제품 가공업 체에서 수입 알루미늄스크랩을 구입하여 알루미늄괴와 함께 용해하여 사용하는데, 2018년도에는 알루미늄스크랩 773,566 톤을 수입하였다8). 이 수입 스크랩으로부터 약 70 %의 금속을 회수한다고 하면 재생 지금 또는 합금양이 541.
성능/효과
수량 면에서 많이 사용되고 산업적으로도 중요한 동, 알루미늄, 아연, 연, 니켈, 주석 및 마그네슘과 같은 7 종의 범용 비철금속에 대하여 국내의 수급현황을 조사 하고 스크랩들의 재활용율을 추정 산출하여 보았다. 조사 결과 2018년 이들 비철금속의 재활용율이 동 25.0 %, 알루미늄 30.6 %, 연 41.2 %, 니켈 1.9 %, 마그네슘 48 % 로 산출되었다. 다만, 아연과 주석의 경우는 단일 스크랩으로 발생하는 경우가 거의 없어서 재활용율을 추산하기가 어려운 문제점이 있었다.
후속연구
국내 비철금속의 수요는 향후에도 증가할 것으로 전망되고 이에 따라 스크랩의 발생량도 증가할 것이다. 비철금속의 리싸이클링을 향상시키기 위해서라도 이러한 조사 연구가 꾸준히 지속되기를 바라며, 본 조사 연구가 국내 비철금속 관련 산학연 관계자 분들께 조금이나마 도움이 되기를 기대한다.
그리고 2017년도에는 멕시코 자본이 공동출자한 ㈜글로벌스틸더스트코리아(GDSK) 사에서도 년간 30,000톤 규모의 조산화아연 생산을 목표로 제강분진처리 공장을 착공하였다고 보도되었다12). 아직까지 이들 업체들의 생산실적이 구체적으로 발표되지 않고 있으나 향후 제강분진의 리싸이클링은 활발히 진행될 것으로 기대된다. 현재는 제강더스트 원료 확보가 문제점으로 대두되고 있다.
2018년도 연의 수요는 내수용 609,000 톤, 수출용 336,500 톤을 기록하였으며, 생산 실적으로는 전기연 411,000 톤, 재생연 약 390,000 톤으로 총 801,000 톤을 기록하였다. 향후에도 국내 폐자동차에서 납축전지의 발생량이 늘어날 것으로 예상되므로 재생연의 생산량은 더 늘어날 것으로 전망된다.
질의응답
핵심어
질문
논문에서 추출한 답변
폐마그네슘 제품으로부터 마그네슘을 회수하여 재활용한 통계가 집계되지 않는 이유는?
마그네슘은 알루미늄과 합금으로 사용되는 양이 제일 많고, 또 알루미늄합금의 첨가제로 사용되는 것이 대부분이기 때문에 폐마그네슘 단일 스크랩으로의 발생량이 별로 없다. 이에 따라 폐마그네슘 제품으로부터 마그네슘을 회수하여 재활용한 통계는 집계되지 않고 있다.
주석은 어떤 재료로 사용되는가?
주석은 철도금 재료로 사용되는 양이 제일 많고(약 40 % 추정), 납땜재료, 청동, 베어링합금재료 등으로 사용된다. 국내는 주석 생산량은 없으며 수요를 전량 수입에 의존하고 있는데, 국내 수요가 년간 14,000톤 내외로 일정하며 2018년도 수요는 약 14,500 톤이었다.
우리나라 주요 재생 알루미늄합금괴 생산업체는?
재생업체는 크게 알루미늄 합금괴 생산업체와 제강용 탈산제업체로 구분된다. 주요 재생 알루미늄합금괴 생산업체로는 삼보산업, 우신금속, 아진금속 등이다. 제강용 탈산제업체로는 알덱스, (주)포스코엠텍과(생산능력 각각 70,000 톤, 50,000 톤 규모) 몇몇 중소업체가 있다.
참고문헌 (13)
Jae-Hyun Oh, Mi-Sung Kim, and Hee-Duck Shin, 2003 : Recycling of Non-Ferrous Metals, Journal of the Korean Institute of Resources Recycling, 12(4), pp.3-19.
Hyungkyu Park and Heeduck Shin, 2009 : Current Status on the Recycling of Domestic Non-Ferrous Metal Scraps, Journal of the Korean Institute of Resources Recycling, 18(1), pp.52-57.
Hyungkyu Park, 2013 : Survey on the Recycling of Domestic Commercial Non-Ferrous Metal Scraps, Journal of the Korean Institute of Resources Recycling, 22(6), pp.81-86.
Hyungkyu Park and Hosang Sohn, 2015 : Current Status on the Recycling of Domestic Major Non-Ferrous Metal Scraps, Journal of the Korean Institute of Resources Recycling, 24(5), pp.72-79.
Korea Customs Service, 2018 : Trade Statistics for Export/Imports, www.customs.go.kr
Korea Nonferrous Metal Association (KONMA), 2018: Demand and Supply of Non-Ferrous Metal Ingots of Korean Markets in recent years (2014-2018), www.nonferrous.or.kr
KONMA, 2018 : Prospection on the Demand and Supply of Non-Ferrous Metals of Korean Markets in 2019, www.nonferrous.or.kr
KONMA, 2018 : Domestic Exports and Imports of Non-Ferrous Metals (2014-2018), www.nonferrous.or.kr
KONMA, 2018 : Domestic Exports and Imports of Non-Ferrous Metal Scraps (2014-2018), www.nonferrous.or.kr
Jae-Hong Yoon, 2013 : Design/Construction and Production Special Quality Evaluation of Waelz Kiln Plant for Recycling of Electric Arc Furnace Dust, Digest of the 2013 Fall Meeting and 41th Conference of the Korean Institute of Resources Recycling, Kintex, Ilsan, Sep. 5-6, 2013, pp.3-4.
Korean Institute of Resources Recycling, 2014 : 2014 Korean Recycling Fact, pp.298-301.
Korea Metal Journal 2017 : Metal World, Aug. 2017, pp.24-25.
Chang-Hyun Wi, Seong-Hun Hong, and Byung-Don You, 2010 : A Study on the Evaporation of Magnesium Alloy (AM50) Scrap Melt under Reduced Pressure, Kor. J. Met. Mater. 48(3), pp.241-247.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.