최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국재난정보학회논문집 = Journal of the Society of Disaster Information, v.15 no.2 = no.44, 2019년, pp.259 - 267
박승진 (Department of Urban Engineering, Incheon National University)
Purpose: In this paper adhesive-bonded cylindrical lap joints are analyzed by assuming that the adherends are elastic and the adhesive is linearly viscoelastic. Method: The distribution of the stresses in the adhensive is evaluated using the Finite Element Method. Nuverical examples for identical an...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
접착제의 역할은? | 접착제는 최신 기술의 발달로 인해 공학분야, 특히 구조 경량화․고기능화가 요구되는 분야에서 널리 사용되고 있다. 본 논문에서 사용되고 있는 Fig. | |
본 논문은 피착제를 탄성체로 접착제 층을 4요소 모델의 선형 점탄성체로 가정하여, 접착제 층 내부의 응력 특성을 어떤 방법으로 해석하였는가? | 본 논문에서는 피착제를 탄성체로 접착제 층을 4요소 모델의 선형 점탄성체로 가정하여, 접착제 층 내부의 응력 특성을 유한요소법에 의한 근사해법으로 해석한다. | |
접착제층의 점탄성을 고려한 랩접착된 원통체의 접착제층의 응력분포에 대해서 4요소 탄성체 모델을 사용하여 수치해석을 하였고, 접착제 층의 응력분포의 시간에 대한 변화 및 응력의 감소 경향에 대한 영향을 알아보았다. 이 연구의 결론은? | 1) 에폭시계의 접착제 재료를 한 예로서, 피착체에는 8절점 아이소파라메트릭 요소와 6절점 접착요소를 이용한 유한요소법에 의해 접착제층의 응력 분포에 대한 해석을 통해 알아보았다. 2) 응력의 감소는 피착체의 강성의 크기에 크게 의존하고, 접착체의 강성이 클수록 작아진다. 3) 수직응력 N의 감소는 전단응력 T보다 크다. |
Adams, R.D., Peppiatt, N.A. (2016). "Stress analysis of adhesive bonded tubular lap joints." J. Adhes, Vol. 9, pp. 1-8.
Jeon, I.K., Jeon, C.K. (2010). "Manufacture and Construction Technology of Polyamide Fiber Reinforced Shotcrete in Tunnel." Journal of the Korea Institute for Structural Maintenance and Inspection, Vol. 14, No. 6, pp. 41-45.
Kim, Y.G., Kim, S.C., Kim, M.H. (2012). "A Study on the Dynamic Properties of Cement Mortar with Recycled PET Fiber." Journal of the Korea Institute of Building Construction, Vol. 2, No. 4, pp. 113-122.
KS F 2566:2000 (2000). Test Method for Flexural Toughness of Steel Fiber Reinforced Concrete. Korean Standards Association.
Lee, I.W., Kim, S.H., Choi, T.J., Hong, B.T., Kim, H.H., Won, J.P. (2011). "Fracture Performance of Stuructural Synthetic Fiber Reinforced Concrete." Conference paper on Korea Concrete Institute, Vol. 23, No. 2, pp. 103-104.
Lubkin, J.L., Reissner, E. (2015). "Stress distribution and design data for adhesive lap joints between circular tubes." J. Appl. Mech, Trans. ASME. pp. 78-81.
Mobasher, B., Shah, S.P. (1990). "Interaction between fibers and the matrix in glass fiber reinforced concrete, Thin-Section Fiber Reinforced Concrete and Ferrocement." SP 124, American Concrete Institute, Detroit, MI, 1990, pp. 137-156.
Soroushian, P., Khan, A., Hsu, J.W. (1992). "Mechanical Properties of Concrete Materials Reinforced with Polypropylene or Polyethylene Fibers." ACI Materials Journal, Vol. 89, No. 2, pp. 535-540.
Yoon, J.H., Jeon, I.K., Jeon, C.K., Lee, S.C. (2012). "Experimental Construction of Polyamide Fiber Reinforced Shotcrete Technology." Journal of the Korean Recycled Construction Resource Institute, Vol. 7, No. 2, pp. 78-83.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.