엔드라인 폭연방지기는 수직 환기장치에 폭연방지와 함께 대기방출을 하도록 한다. 엔드라인 폭연방지장치는 선박과 같은 산업현장의 다양한 분야에 적용된다. 폭연방지기에서 스프링은 스프링 부하와 스프링의 탄성이 후드 개방 모멘트를 결정하므로 필수 부품이다. 더욱이, 장치 내 스프링은 고온의 상태에서도 작동해야 한다. 따라서, 폭연이 나타나기 시작할 때 스프링의 기계적 하중과 탄성을 분석할 필요가 있다. 이 연구에서는 엔드라인 폭연방지기의 작동 프로세스의 시뮬레이션을 기반으로 열 및 구조해석을 수행하으며, 스프링의 3차원 모델은 CFD 시뮬레이션을 이용하였다. CFD 해석은 FEM 시뮬레이션 값을 입력하여 스프링 구조를 분석한다. 본 연구에서는 스프링 부하의 43 kg, 93 kg 및 56 kg 세 가지 경우 즉, 150 mm 스프링 디플렉션에 부합하도록 집중적으로 관찰하였다. 결과적으로, $1,000^{\circ}C$ 가열조건 하에서 5분 후에 스프링 부하가 10 kg 감소했다. 시뮬레이션 결과는 연소 시간 변화에 따라 스프링의 부하와 탄성을 예측하고 추정할 수 있었다. 또한, 연구의 결과는 폭연방지기의 제조자들에게 역화방지장치뿐만 아니라 스프링의 설계를 최적화하기 위한 참고 자료로 활용할 수 있다.
엔드라인 폭연방지기는 수직 환기장치에 폭연방지와 함께 대기방출을 하도록 한다. 엔드라인 폭연방지장치는 선박과 같은 산업현장의 다양한 분야에 적용된다. 폭연방지기에서 스프링은 스프링 부하와 스프링의 탄성이 후드 개방 모멘트를 결정하므로 필수 부품이다. 더욱이, 장치 내 스프링은 고온의 상태에서도 작동해야 한다. 따라서, 폭연이 나타나기 시작할 때 스프링의 기계적 하중과 탄성을 분석할 필요가 있다. 이 연구에서는 엔드라인 폭연방지기의 작동 프로세스의 시뮬레이션을 기반으로 열 및 구조해석을 수행하으며, 스프링의 3차원 모델은 CFD 시뮬레이션을 이용하였다. CFD 해석은 FEM 시뮬레이션 값을 입력하여 스프링 구조를 분석한다. 본 연구에서는 스프링 부하의 43 kg, 93 kg 및 56 kg 세 가지 경우 즉, 150 mm 스프링 디플렉션에 부합하도록 집중적으로 관찰하였다. 결과적으로, $1,000^{\circ}C$ 가열조건 하에서 5분 후에 스프링 부하가 10 kg 감소했다. 시뮬레이션 결과는 연소 시간 변화에 따라 스프링의 부하와 탄성을 예측하고 추정할 수 있었다. 또한, 연구의 결과는 폭연방지기의 제조자들에게 역화방지장치뿐만 아니라 스프링의 설계를 최적화하기 위한 참고 자료로 활용할 수 있다.
An end-line flame arrester allows free venting in combination with flame protection for vertical vent applications. End-line flame arresters are employed in various fields, especially in shipping. In flame arresters, springs are essential parts because the spring load and the spring's elasticity det...
An end-line flame arrester allows free venting in combination with flame protection for vertical vent applications. End-line flame arresters are employed in various fields, especially in shipping. In flame arresters, springs are essential parts because the spring load and the spring's elasticity determine the hood opening moment. In addition, the spring has to work under a high-temperature condition because of the burning gas flame. Therefore, it is necessary to analyze the mechanical load and elasticity of the spring when the flame starts to appear. Based on simulations of the working process of a specific end-line flame arrester, a thermal and structural analysis of the spring is performed. A three-dimensional model of a burned spring is built using computational fluid dynamics (CFD) simulation. Results of the CFD analysis are input into a finite element method simulation to analyze the spring structure. The research team focused on three cases of spring loads: 43, 93, and 56 kg, correspondingly, at 150 mm of spring deflection. Consequently, the spring load was reduced by 10 kg after 5 min under a $1,000^{\circ}C$ heat condition. The simulation results can be used to predict and estimate the spring's load and elasticity at the burning time variation. Moreover, the obtained outcome can provide the industry with references to optimize the design of the spring as well as that of the flame arrester.
An end-line flame arrester allows free venting in combination with flame protection for vertical vent applications. End-line flame arresters are employed in various fields, especially in shipping. In flame arresters, springs are essential parts because the spring load and the spring's elasticity determine the hood opening moment. In addition, the spring has to work under a high-temperature condition because of the burning gas flame. Therefore, it is necessary to analyze the mechanical load and elasticity of the spring when the flame starts to appear. Based on simulations of the working process of a specific end-line flame arrester, a thermal and structural analysis of the spring is performed. A three-dimensional model of a burned spring is built using computational fluid dynamics (CFD) simulation. Results of the CFD analysis are input into a finite element method simulation to analyze the spring structure. The research team focused on three cases of spring loads: 43, 93, and 56 kg, correspondingly, at 150 mm of spring deflection. Consequently, the spring load was reduced by 10 kg after 5 min under a $1,000^{\circ}C$ heat condition. The simulation results can be used to predict and estimate the spring's load and elasticity at the burning time variation. Moreover, the obtained outcome can provide the industry with references to optimize the design of the spring as well as that of the flame arrester.
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
문제 정의
The flame arresters selection and investigation should be carefully performed to ensure that the device reliably operates in the event of a malfunction. In this research, the authors focuses on end-line flame arresters which arranged on the top of LPG tanks as ventilation and light-back preventing equipments. The flame arrester's spring plays an important role in determining the hood opening time which ensure a stable temperature.
가설 설정
2) In all three cases, because of spring pad, the spring load decrease rapidly during the first firing 30 seconds and then gradually decrease after 5 minutes in high temperature.
제안 방법
Fluid Structure Interaction (FSI) model which combine Computational Fluid Dynamic (CFD) model and Finite Element Method (FEM) are applied to predict spring load and spring elasticity under high temperature working conditions. The author performs two separate simulations which are CFD simulation and FEM simulations. The CFD model is used to indicate spring thermal conditions under the influence of a 1,000℃ natural gas flame.
The CFD and FEM model is meshed independently. The numerical model adopted hexa and tetra mesh style which consists of 2.1 million nodes for CFD model and 1.1 million nodes for FEM model (Fig. 2). The mesh quality values are in acceptable range for both models.
Therefore, the main objective of the presented work is performance in the spring dynamic response of specific medium-size flame arresters model, so as to predict and evaluate the springs mechanical elasticity and stresses. Finally, the simulation results can be used to estimate the maker’s springs design.
대상 데이터
The Table 6 illustrate the spring's case studies. The spring material is STS 316. The inner diameter is similar in all cases.
이론/모형
1 and Table 1 illustrated the main parts. The flame arrester model is imported in ANSYS. In ANSYS, the finite element model of the flame arrester is built.
This paper introduce part of author’s work on long term study about the flame arresters structural analysis.
Chiu, C. H. , C. L. Hwan, H. S. Tsai and W. P. Lee (2007), An experimental investigation into the mechanical behaviors of helical composite springs, Compos. Struct., Vol. 77, Issue 3, pp. 331-340.
Kapadia, D. , P. H. Desai and A. Sonami (2016), Design and Analysis of composite leaf spring for light weight vehicle, International Journal of engineering sciences and research technology, Vol. 3, Issue 6, pp. 666-672.
Lingaiah, K. , and B. R. Narayana Iyengar (2006), Machine Design Data Handbook, Suma publishers.
Pavani, P. N. L. , B. K. Prafulla, R. Pola Rao and S. Srikiran (2014), Design, Modeling and Structural Analysis of Wave Springs, 3rd International Conference on Materials Processing and Characterisation (ICMPC 2014), Procedia Materials Science, Vol. 6, pp. 988-995.
Pinjarla, Poornamohan and T. Lakshmama Kishore (2012), Design and analysis of a shock absorber, International Journal of Research in Engineering and Technology, Vol. 1, Issue 4, pp. 578-592.
PTB (2010), Physikalich Technische Bundesanstalt, EC typeexamination certificates of static flame arresters with crimped ribbon flame arrester elements.
Syambabu, Nutalapati (2015), Structural analysis of shock absorber by using ANSYS, International Journal of Engineering Research-Online, Vol. 3, Issue 6, pp. 588-608.
Weggel, D. C. , D. M. Boyajian and S. E. Chen (2007), Modeling structures as system springs, World Transactions on Engineering and Technology Education Vol. 6, No. 1, pp. 169-172.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.