[논문]군용장갑차 및 자주포용 송풍기의 내구수명 향상에 대한 연구

박영민; 김병욱; 김성훈; 노상완

doi:10.7469/jksqm.2019.47.3.453

[국내논문] 군용장갑차 및 자주포용 송풍기의 내구수명 향상에 대한 연구
A Study on Durability Life Improvement of Blower for Military Armored Vehicle and Self-propelled Artillery 원문보기

品質經營學會誌 = Journal of Korean society for quality management, v.47 no.3, 2019년, pp.453 - 465

박영민 (국방기술품질원) , 김병욱 (한화디펜스) , 김성훈 (국방기술품질원) , 노상완 (국방기술품질원)

Abstract ▼ AI-Helper

Purpose: A main purpose is to increase the operational rate and reduce operating maintenance costs by Improving the durability of Blower of Military Armored Vehicle and Self-propelled Artillery. As a result, it is expected to improve the service quality of customers. Methods: After analyzing the cause of the stop of the blower, the improvement plans were established and the effectiveness of each improvement plans were verified by testing. Results: Mechanical, electrical and environmental factors affecting brush wear were reviewed, but it was difficult to specify the cause, which necessitated a review of the application of the BLDC motor. Conclusion: After applying the BLDC motor to the blower, tests proved that the existing blower can be replaced. It is expected that this study will help improve the durability life of similar equipment that is applied with Brushed DC motors as well as blowers.

주제어

표/그림 (18)

그림 Figure 1. Factors of Brush Wear(Fishbone Diagram)
그림 Figure 2. Brush Position
표 Table 1. Comparison of Ripple Measurement Results
표 Table 2. Vibration Profile(Grms)
표 Table 3. Operating Force by Samples
표 Table 4. Improvement Plan of Brush Wear Factors
그림 Figure 3. Test Layout of Blower
그림 Figure 4. Brush Length by Time after Application of Improvement Plan 1, 2
표 Table 5. Vibration Measurement after Application of Improvement Plan 3
그림 Figure 5. Static Pressure Test
표 Table 6. Current and RPM Variation according to Static Pressure
그림 Figure 6. Temperature Test
표 Table 7. Brush Length by Time according to Static Pressure
표 Table 8. Brush Length by Time with Temperature Variation
그림 Figure 7. Results of Starting Current Test
그림 Figure 8. Comparison of Counter electromotive force between Sample and FEMM
표 Table 9. Comparison of Components after Application of BLDC Motor
표 Table 10. Summary of Test Results after Application of BLDC Motor

참고문헌 (17)

Department of Defense(DoD). 2006. CHARACTERISTICS OF 28 VOLT DC INPUT POWER TO UTILIZATION EQUIPMENT IN MILITARY VEHICLE. MIL-STD-1275D.
Department of Defense(DoD). 2007. REQUIREMENTS FOR THE CONTROL OF ELECTOMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT. MIL-STD-461F.
Department of Defense(DoD). 2008. ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS. MIL-STD-810G.
Eom, Hak-Yong, Lee, Gi-Chun, Chang, Mu-Seong, Park, Jong-Won, and Lee, Yong-Bum. 2018. "Accelerated Life Test of Industrial Cleaner Motor." Journal of Applied Reliability 18(3):193-200.

원문보기 상세보기
Kang, Bosik, Lee Youngbum, Jeong, Dongsoo, and Lee, Chungsung. 2018. "Study on the Analysis of Failure Cause and Determination of Life Test Mode of Capsule." Journal of Applied Reliability 18(3):260-270.

원문보기 상세보기
Kim, Jung-Yul, and Shin, Wae-Gyeong. 2010. "Correlation Analysis Carbon Brush Wear and Blower DC Motor Performance and the Estimation of Brush Life by Regression Analysis." The Korean Society of Mechanical Engineers, Spring and Autumn conference, 2026-2030.
Kim, Sung-An, and Cho, Yun-Hyun 2019. "Optimal Design for Performance Improvements of Brushless DC Motor considering Adnanced Twelve Step Control." Journal of IKEEE 23(1):9-13.
Kim, Sunghoon, and Seo, Hyun-Soo. 2018. "A Study on Service the Quality of Defence Quality Assurance Activites using Kano Model by Company Size." Journal of the Korean Society for Quality Management 46(3):397-410.
Korea Dictionary Research Publishing(KDR). 1995. "Quality." MECHANICAL ENGINEERING GLOSSARY.
Lee, Hakyong. 2007. "The Development Report of Dust Extractor Blower Motor for K1A1 MBT" DTaQ Technical Report, DTaQ-07-1367-D.
Lee, Sang Jong. 2017. "A Study on the Robust Structure for Improvement of Front Insulator Noise Improvement" Journal of Applied Reliability 17(3):197-206.
Seo, Hyun-Soo, Seo, Jae-Hyun, and Kim, Hyun-Min. 2017. "A Study on Service Quality of Defence Quality Assurance Activites using Kano Model & PCSI Index." Journal of the Korean Society for Quality Management 45(2):261-274.
Shin, Jaesik, Kang, Jungho, and Kim, Hyongjun. 2018. "Cleaning Interval Selection for SCR considering Endurance Reliability and Emissions Reduction Efficiency in Heavy Duty Commercial Engine." Journal of Applied Reliability 18(1):66-71.

원문보기 상세보기
Shin, Wae Gyeong. 2010. "A Study on Brush Wear Analysis for Life Prediction of Brush type DC Motors." A doctoral dissertation at Yonsei University.
Shin, Wae Gyeong. 2018. "A Study on the Life Cycle Characteristics of Brush-type DC Motor for Automobiles." The Korean Society of Mechanical Engineers, Spring and Autumn conference, 98-99.
Yoon, Hyo-Jin, Nam, Yoon-Wook, and Park, Kyoung-Sik. 2018. "A Study on Reliability Improvement of BLDC Motor for Combat Vehicle in High Temperature Environment." Journal of the Korean Society of Manufacturing Process Engineers 17(5):97-102.
Zhu, He-Lin, Mok, Hyung-Soo, Lee, Hyeong-Geun, Han, Soo-Hee, and Seo, Hyeon-UK. 2019. "Controller Design of BLDC Motor Fin Position Servo System by Employing H-infinity Loop Shaping Merhod." THE TRANSACTIONS OF KOREAN INSTITUTE OF POWER ELECTRONICS 24(1):49-55.

LOADING...

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증