최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of KIBIM = 한국BIM학회논문집, v.9 no.3, 2019년, pp.30 - 40
함남혁 (한양사이버대학교 건축도시건설공학부 디지털건축도시공학과) , 양정혜 (한양사이버대학교 건축도시건설공학부 디지털건축도시공학과) , 여옥경 (한양사이버대학교 건축도시건설공학부 디지털건축도시공학과)
Extraction of fabrication documents is very important because it provides information related to tasks of fabrication and construction. Therefore, in the case of a prefabricated member such as a steel structure, it is necessary to improve the productivity of fabrication documents through 3D BIM. How...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
설계도면에 2D 주석요소는 무엇인가? | 마지막으로 설계도면에 2D 주석요소(ex. 키맵, 실명, 치수, 재료명, 범례, 상세선 등)를 추가적으로 표현하여 정보를 상세화한다. 3D BIM을 활용한 도면 작성의 가장 큰 장점은 설계변경 및 도면 수정 시간의 단축이다. | |
설계단계의 업무 중 도면 산출은 제작 및 시공과 연계하여 정보를 제공하기에 제작도면 산출에 대한 생산성을 향상시키는 것이 특히 요구되는 분야는 ? | 설계단계의 업무 중 도면 산출은 제작 및 시공과 연계하여 정보를 제공하기 때문에 중요도가 매우 높다. 특히, 철골공사와 같이 부재가 공장에서 사전 제작되어 현장에 반입되어야 하는 경 우 제작도면 산출에 대한 생산성을 향상시키는 것이 매우 중요하다(Lim, 2017). 이러한 측면에서 BIM 기반 설계도면 작성은 투입인력과 시간을 절감하는데 매우 중요하다(Chin, 2016). | |
3D BIM 작성의 역할은 무엇인가? | 일반적으로 알려진 BIM의 주요 기능은 Table 1과 같다. 이 중 3D BIM 작성은 객체(Object) 정보 기반으로 3D Model을 작성하고, 시각화하는 것으로 설계오류 및 간섭검토, 물량산출, 도면작성, 시각화, 공정 시뮬레이션 등 관련 업무의 기준이 된다. 특히, 본 연구에서 3D Model은 설계 및 엔지니어링 정보를 설계도면에 일관되게 공급할 수 있는 데이터베이스 역할을 한다. |
Chin, S. Y. (2016). The Truth of 2D Drawing Extraction from BIM, Magazine of KIBIM, Winter 2016. pp. 27-30.
Ministry of Land, Infrastructure and Transport. (2018). Department of Technology Policy, Smart construction technology roadmap for construction productivity innovation and safety enhancement, pp. 1-26.
EOM, J. U., Shin, T. S. (2010). A Study on the Automation of the Connection modeling for Steel Structures based on BIM, Journal of Korean Society of Steel Construction, 22(1), pp. 99-108.
EOM, J. U., Shin, T. S. (2011). A Development of Interface Module between Structural Design and Detail Design based on BIM, Journal of Korean Society of Steel Construction, 23(1), pp. 113-124.
Ham, N. H., Moon, S., Kim, J. H., Kim, J. J. (2018). Downloaded 565 times Case Studies Economic Analysis of Design Errors in BIM-Based High-Rise Construction Projects: Case Study of Haeundae L Project, Journal of Construction Engineering and Management Vol. 144, Issue 6 (June 2018), https://doi.org/10.1061/(ASCE)CO.1943-7862.0001498
Isolda, A. J., Florian, M., Norman, H., Timothy, W., Guillaume, H. (2017). Potential benefits of digital fabrication for complex structures: Environmental assessment of a robotically fabricated concrete wall, Journal of Cleaner Production. 154, 2017, pp.330-340.
Jang, S., Lee, G. (2018). Process, productivity, and economic analyses of BIM-based multi-trade prefabrication-a case study, Automation in Construction, vol. 89, pp. 86-98.
Kaner, I., Sacks, R., Kassian, W., Quitt, T. (2008). Case Studies of BIM Adoption for Precast Concrete Design by Mid-sized Structural Engineering Firms, ITcon Vol. 13, pp. 303-323.
Kim, B. J., Kim, Y. J., Chin, S. Y. (2018). A development of a checklist to check the consistency of BIM and drawings at the construction documentation phase, Journal of KIBIM, 8(1), pp. 33-42.
Kim, H. J. (2017). Analysis of BIM utilization in construction site, Construction Technology, Ssangyong Construction, pp. 68-73.
Kim, J. K., Yoo, M. Y., Ham, N. H., Kim, J J., Choi, C. S. (2018). Process of Using BIM for Small-Scale Construction Projects - Focusing on the Steel-frame Work -, Journal of KIBIM, 8(2), pp. 41-50.
Kim, S. J., Park, Y. M., Park, J. J. (2017). Review of Freeform Buildings using CNC T-BAR System, Journal of Academic and Technical Papers, Journal of The Korean Institute of Building Construction, 17(1), pp. 60-61.
Lee, J. S., Kwon, N. H., Ham, N. H., Kim, J. J., Ahn, Y. H. (2019). BIM-Based Digital Fabrication Process for a Free-Form Building Project in South Korea, https://doi.org/10.1155/2019/4163625 (Jul. 03. 2019).
Lim, C. H. (2017). Application of 3D Information to Reduce Rework, Thesis (Master) - Hanyang University Graduate School of Engineering: Plant Engineering Major 2017. 2
Nahangi, M., Haas, C. T. (2014). Automated 3D compliance checking in pipe spool fabrication, Advanced Engineering Informatics, vol. 28, no. 4, pp. 360-369.
Neelamkavil, J., Ahamed, S. S. (2012). The Return on Investment from BIM-driven Projects in Construction. IRC-RR-324, National Research Council, Canada, 2012.
Oh, H. O., Jung, J. H., Lee, J. C. (2013). A Guideline for Structural Drawings Based on BIM, Journal of the Architectural Institute of Korea Structure & Construction, 29(3), pp. 39-46.
Park, S. M., Ryu, J. R., Woo, S. H., Choo, S. Y. (2016). A Proposal for Required Drawing Information Standard and Its Effectiveness for Writing BIM-Based Construction Consent Documents, Journal of the regional association of architectural institute of korea, 18(2), pp. 19-26.
Public Procurement Service (2017). Facility Project Basic Guide for Applying BIM, v1.32, https://www.pps.go.kr/mobile/item/domesticView.dom?boardSeqNo3127&pageIndex1&boardIdPPS089 (Jul. 15. 2019).
Shin, T. S., Yang, J. M. (2009). A Proposal for the Automation Process of Creating Shop Drawings in Steel Constructions, Journal of the regional association of architectural institute of korea, 11(4), pp. 267-274.
Wang, H. K., Choi, J. H. (2019). Data-driven Interactive Planning Methodology for EPC Plant Projects, Korean Journal of Construction Engineering and Management, 20(2), pp. 95-104.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.