최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국안전학회지 = Journal of the Korean Society of Safety, v.34 no.5, 2019년, pp.111 - 118
이동규 (한국가스안전공사 가스안전연구원) , 최명성 (단국대학교 토목환경공학과)
Recently, a variety of special concrete structures have been designed in domestic and overseas construction markets and more advanced construction technology is required. Therefore, it is necessary to secure quantitative construction technology. For this purpose, it is essential to develop a standar...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
레오미터란 무엇인가? | 또한, 초기 시공단계에서 일정한 품질 제어가 가능한 안정적인 시공이 가능해지며, 이로 인해 시공시 건설 시스템 안전기술 확보 등 기존 정성적인 안전관리기술 수준에서 정량적인 안전 시스템 구축 및 체계화가 가능해진다. 아울러, 현재까지 개발된 다양한 유동성 정량 측정시스템 즉, 레오미터(Rheometer)에 대한 보정(Calibration)이 가능해지고, 배관압송시험, 펌프장비 마모성 평가, 디지털프린팅 등 정량적 유동성능 제어를 필요로 하는 여러 분야에서 활용될 수 있다. 이에 국외를 중심으로 콘크리트의 유동특성을 모사할 수 있는 표준물질에 대한 연구가 일부 수행되고 있지만 국내의 경우 표준물질에 대한 명확한 규정이 아직까지 부재한 실정이다11). | |
특수구조물에 요구되는 것은 무엇인가? | 이에 따라 국내⋅외에서는 더욱 다양한 형태의 특수콘크리트 구조물이 요구되어지는 등 특수콘크리트 공사에 대한 수요는 지속적으로 증대되고 있다1-3). 한편, 이러한 특수구조물은 시공과정에서 완벽한 구조물 시공을 위해 보다 향상된 최적의 콘크리트 배합설계와 효과적인 타설 및 이송 기술이 요구된다4). 이를 위해서는 설계기술 및 시공기술에 대한 객관적 분석이 이루어져야 하며, 최적의 품질관리 및 시공관리가 가능한 콘크리트의 정량적 평가기술이 요구된다5). | |
특수콘크리트 공사에 대한 수요가 지속적으로 증대되는 이유는 무엇인가? | 현재 국내⋅외 건설 산업은 설계 및 재료 기술과 아울러 시공기술에 대한 발전이 상당히 이루어지고 있다. 특히, 우리나라에서는 롯데타워, 인천대교 등 초대형 건설기술 실적과 함께 해외 건설시장까지 규모가 확대되는 등 세계적으로 시공 기술을 인정받고 있다. 이에 따라 국내⋅외에서는 더욱 다양한 형태의 특수콘크리트 구조물이 요구되어지는 등 특수콘크리트 공사에 대한 수요는 지속적으로 증대되고 있다1-3). |
D. K. Lee, K. W. Lee, G. J. Park, S. W. Kim, J. J. Park, Y. J. Kim and M. S. Choi, "Guideline for Filling Performance of Concrete for Modular LNG Storage Tanks", J. Korean Soc. Saf., Vol. 33, No. 2. pp. 86-93, 2018.
D. K. Lee, K. W. Lee and M. S. Choi, "Study on Filling Capacity of Self-Consolidating Concrete for Modular LNG Storage Tank", J. Korean Soc. Saf., Vol. 33, No. 6, pp. 50-57, 2018.
S. Y. Hwang, H. K. Lee and B. H. Kang, "A Study on the Applicability of High-Workable Concrete in Field", J. Korean Soc. Civ. Eng., Vol. 14, Issue 7, pp. 71-78, 1998.
G. H. Tattersall and P. F. Banfill, "The Rheology of Fresh Concrete", Pitman. London, UK, 1993.
N. Roussel, A. Lemaitre, R. J. Flatt and P. Coussot, "Steady State Flow of Cement Suspensions", A Micromechanical State of the Art", J. Cem. Concr., Vol. 40, Issue 1, pp. 77-84, 2010.
J. E. Wallevik, "Rheological Properties of Cement Paste Thixotropic Behavior and Structural Breakdown", J. Cem. Concr., Vol. 39, Issue 1, pp. 14-29, 2009.
L. J. Struble and W. G. Lei, "Rheological Changes Associated with Setting of Cement Paste", J. Adv. Cem. Based Mater., Vol. 2, Issue 6, pp. 224-230, 1995.
D. K Lee, K. W. Lee and M. S. Choi, "Study on the Develop of Standard Reference Materials for Safety Control of Construction Materials." J. Korean Soc. Saf., Vol. 32, No. 5, pp. 54-61, 2017.
C. F. Ferraris, P. E. Stutzman, W. F. Guthrie and J. Winpigler, "Certification of SRM 2492 : Bingham Paste Mixture for Rheological Measurements", NIST Special Publication, pp. 260-174, 2012.
C. F. Ferraris, H. K. Obla and H. Russell, "The Influence of Mineral Admixtures on the Rheology of Cement Paste and Cncrete",Cement and Concrete Research, Vol. 31, Issue 2, pp. 245-255, 2001.
G. C. Lee, "Study on Rheological Properties of Suspension by Shear Box Test", Journal of the Architectural Institute of Korea, Vol. 23, No. 8, pp. 149-156, 2007.
M. He, Y. Wang and E. Forssberg, "Parameter Studies on the Rheology of Limestone Slurries", International Journal of Mineral Processing, Vol. 78, Issue 2, pp. 63-77, 2006.
K. H. Sweeny and R. D. Geckler "The Rheology of Suspensions", J. Applied Physics, Vol. 25, Issue 9, 1954.
J. F. Swindells, R. C. Hardy and R. L. Cottington, “Precise Measurements With Bingham Viscometers and Cannon Master Viscometers,” Journal of the Research of the National Bureau of Standards, Vol. 52, No. 3, pp. 105-115, 1954.
M. Nehdi and M. A. Rahman, "Estimating Rheological Properties of Cement Pastes using Various Rheological Models for Different Test Geometry, Gap and Surface Fiction.", J. Cem. Concr. Res., Vol. 34, Issue 11, pp. 1993-2007, 2004.
S. Kulasegarm, B. L. Karihaloo and A. Ghanbari, "Modelling the Flow of Self-compacting Concrete", Int. J. Numer. Anal. Meth. Geomech, Vol. 35, Issue 6, pp. 713-723, 2011.
R. E. Robertson and H. A. Stiff Jr., "An Improved Mathematical Model for Relating Shear Stress to Shear Rate in Drilling Fluids and Cement Slurries", J. Soc. Pet. Eng., Vol. 16, Issue 1, pp. 31-36, 1976.
A. Papo and L. Piani, "Effect of Various Superplasticizers on the Rheological Properties of Portland Cement Pastes", Cement and Concrete Research, Vol. 34, Issue 11, pp. 2097-2101, 2004.
L. Struble and G. K. Sun, "Viscosity of Portland Cement Paste as a Function of Concentration", J. Adv. Cem. Based Materials, Vol. 2, Issue 2, pp. 62-69, 1995.
H. Uchikawa, K. Ogawa and S. Uchida, "Influence of Character of Clinker on the Early Hydration Process and Rheological Property of Cement Paste", J. Cem. Concr. Res., Vol. 15, Issue 4, pp. 561-572, 1995.
D. A. Williams, A. W. Saak, H. M. Jennings, "The Influence of Mixing on the Rheology of Fresh Cement Paste", J. Cement and Concrete Research, Vol. 29, Issue 9, pp. 1491-1496, 1999.
T. E. R. Jones and S. Taylor, "A Mathematical Model Relating the Flow Curve of a Cement Paste to its Water/cement ratios", J. Magazine of Concrete Research, Vol. 29, Issue 101, pp. 207-212, 1977.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.