최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국산학기술학회논문지 = Journal of the Korea Academia-Industrial cooperation Society, v.21 no.1, 2020년, pp.387 - 392
최정주 (동아대학교 기계공학과)
This paper proposes a flow-rate control system for industrial valves. Industrial valves are used in piping systems to control the flow rate and pressure. In general, valves used in pipelines are classified into globe valves, butterfly valves, and ball valves according to the shape. Motor, hydraulic,...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
산업용 밸브의 역할은 무엇인가? | 본 논문은 산업용 밸브의 유량제어시스템을 제안하였다. 산업용 밸브는 주로 배관시스템에 장착되어 유량 및 압력 제어에 사용된다. 제어밸브의 구조 및 작동 방식은 설치환경과 작업용도에 따라 상이하다. | |
신호압축법의 원리는 무엇을 이용하는 것인가? | 신호압축법의 원리는 임펄스응답의 라플라스 변환이 전달함수임을 이용한다. 임펄스 신호는 물리적으로 구현이 불가능함으로 임펄스 신호의 스펙트럼을 관심 주파수 영역에서 균일한 크기를 가지는 스펙트럼 신호를 이용하여 전달함수를 구하는 방법이다. | |
압력계를 이용한 유량 계측의 원리는? | 그루브 밸브의 유량제어시스템을 설계하기 위해서는 밸브를 통과한 유량을 계측하여야 하지만, 본 논문에서는 고가의 유량계는 사용하지 않고 압력계를 이용하여 제어 하는 방법을 제안하였다. 제어밸브는 밸브의 개폐정도에 따라 밸브를 통과하는 유량을 유량계수로 나타낼 수 있고 이는 밸브 전후의 압력차에 비례한다[7,8]. 이는 IEC 534-1, IEC 534-2-3 규정에서 다음과 같이 나타낸다. |
A. M. Jazi and H. Rahimzadeh, "Waveform Analysis of Cavitation in Globe valve," Ultrasonics, Vol. 49, pp. 577-582, 2009. DOI: http://www.doi.org/10.1016/j.ultras.2009.02.004
B. Liu, J. Zhao and J. Qian, "Numerical analysis of cavitation erosion and particle erosion in butterfly valve," Engineering Failure Analysis Vol. 80, pp. 312-324, 2017. DOI: http://www.doi.org/10.1016/j.engfailanal.2017.06.045
J. Jung and P. Seong, "Error analysis in improved motor control center method for stem thrust estimation of motor-operated valves in nuclear power plants," IEEE Transactions on Nuclear Science, vol. 50, No. 3, pp. 735-740, 2003. DOI: http://www.doi.org/10.1109/TNS.2003.812458
S. Kang, S. Park, D. Lee, Y. Kim and D. Kim, "A study on the stem friction coefficient behavior of motor-operated valves," Nuclear Engineering and Design, Vol. 241, pp. 961-967, 2011. DOI: http://www.doi.org/10.1016/j.nucengdes.2011.01.017
J. U. Byeon, C. H. Kim, S. H. Park, M. W. Lee and M. C. Kang, "Effects of Flow Rate and Discharge Pressure with Compressing Spring in Non-diaphragm Type Stem of Water Pressure Reducing Valve," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18, No. 5, pp.103-109, 2019. DOI: http://www.doi.org/10.14775/ksmpe.2019.18.5.103
C. W. Kang, C. S. Yi, S. M. Jang and C. W. Lee, "A Study of the Measurement of the Flow Coefficient Cv of a Ball Valve for Instrumentation," Journal of the Korean Society of Manufacturing Process Engineers Vol. 18, No. 3, pp. 103-108, 2019. DOI: http://www.doi.org/10.14775/ksmpe.2019.18.3.103
C. Alimonti, "Experimental characterization of globe and gate valves in vertical gas-liquid flows," Experimental Thermal and Fluid Science, Vol. 54, pp. 259-266, 2014. DOI: http://www.doi.org/10.1016/j.expthermflusci.2014.01.001
L. Wanga, X. Liub and C. Wang, "Improved disturbance observer based control for airborne photoelectric stabilized platform," International Journal for Light and Electron Optics, Vol. 188, pp. 133-136, 2019. DOI: http://www.doi.org/10.1016/j.ijleo.2019.05.041
'N. Aoshima, "Measurement of nonlinear vibration by signal compression method," Journal of the Acoustical Society of America, vol. 76, no. 3, pp. 794-801, 1984. DOI: http://www.doi.org/10.1121/1.391303
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.