최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.19 no.12, 2020년, pp.8 - 13
서영진 (금오공과대학교 기계공학과)
Seamless pipes are fabricated by drilling a hole in a cylindrical material and drawing the material to the desired diameter. These pipes are used in environments where high reliability is required. In this study, the pipe drawing process was simulated using DEFORM, a commercial finite element method...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Ahn, S., Park, J., Kim, Y., Won, J., Kim, H., & Kang, I., "An Analytical Study by Variation of Die and Plug Angle in Drawing Process for the Strength Optimization of Ultra High Pressure Common Rail Fuel Injection Tube Raw Materia," Transactions of the Korean Society of Automotive Engineers, Vol. 24, No. 3, pp. 338-344, 2016.
Dixit, U. S., & Dixit, P. M., "An analysis of the steady-state wire drawing of strain-hardening materials," Journal of Materials Processing Technology, Vol. 47, No. 3-4, pp. 201-229, 1995.
Kampus, Z., "Analysis of factors influencing accuracy in the drawing of round rods," Journal of Materials Processing Technology, Vol. 87, No.13, pp. 90-96, 1999.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.