최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기전기전자학회논문지 = Journal of IKEEE, v.24 no.1, 2020년, pp.319 - 325
정지택 (School of Electrical and Computer Engineering, University of Seoul) , 윤범수 (School of Electrical and Computer Engineering, University of Seoul) , 최중호 (School of Electrical and Computer Engineering, University of Seoul)
In this paper, a discontinuous-conduction mode (DCM) DC-DC buck converter is presented for mobile device applications. The buck converter consists of compensator for stable operations, pulse-width modulation (PWM) logic, and power switches. In order to achieve small hardware form-factor, the number ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
영 전류 감지 회로의 기능은? | 벅 변환기의 DCM 동작 중 인덕터의 역전류를 방지하기 위해 영 전류 감지 회로를 추가하였다. 영 전류 감지 회로는 인덕터 전류가 0이 되었을 때 off-스위치를 open 하여 역전류를 방지한다. | |
Soft start-up 회로의 기능은? | Soft start-up 회로는 벅 변환기의 초기 동작 시 인덕터의 돌입전류를 낮추고 출력전압의 오버슈트 현상을 억제하므로 회로를 안정적으로 동작할 수 있게 한다. | |
배터리 기술이 회로기술 발전을 따라 잡지 못한 결과는? | 그러나 배터리 기술은 회로기술의 발전을 따라 잡지 못하고 있다. 그 결과 무선기기 시대에 전력 관리회로는 점점 더 복잡한 문제가 되고 있다[2]. 또한, IoT edge node는 점점 더 복잡한 센싱, 연산, 연결 능력을 더 작은 폼-팩터(form-factor)에 집적 하고 있다[3]. |
Y. Yokoyama et al., "40-nm 64-kbit Buffer/Backup SRAM with 330 nW Standby Power at $65^{\circ}C$ Using 3.3 V IO MOSs for PMIC less MCU in IoT Applications," 2018 IEEE Asian Solid-State Circuits Conference (A-SSCC), pp.9-12, 2018. DOI: 10.1109/ASSCC.2018.8579327
C. Shi, B. C. Walker, E. Zeisel, B. Y. Hu, and G. H. McAllister, "A Highly Integrated Power Management IC for Advanced Mobile Applications," IEEE Journal of Solid-State Circuits, Vol.42, No.8, pp.1723-1731, 2007. DOI: 10.1109/CICC.2006.320982
S. Kim et al., "A Single-Stage, Single-Inductor, 6-Input 9-Output Multi-Modal Energy Harvesting Power Management IC for $100{\mu}W$ -120MW Battery-Powered IoT Edge Nodes," 2018 IEEE Symposium on VLSI Circuits, pp.195-196, 2018. DOI: 10.1109/VLSIC.2018.8502301
R. W. Erickson, D. Maksimovic, Fundamentals of Power Electronics, 2nd ed., Kluwer Academic Publishers, 2001.
K. Shibata and C. Pham, "A DC-DC Converter using a high speed soft-start control circuit," in Proc. of 2010 IEEE International Symposium on Circuits and Systems, pp.833-836, 2010. DOI: 10.1109/ISCAS.2010.5537434
S. Zhou and G. A. Rincon-Mora, "A high efficiency, soft switching DC-DC converter with adaptive current-ripple control for portable applications," in IEEE Transactions on Circuits and Systems II: Express Briefs, Vol.53, No.4, pp.319-323, 2006. DOI: 10.1109/TCSII.2005.859572
F. Reverter and M. Gasulla, "Optimal Inductor Current in Boost DC/DC Converters Operating in Burst Mode Under Light-Load Conditions," IEEE Trans. Power Electronics, Vol.31, No.1, pp.15-20, 2016. DOI: 10.1109/TPEL.2015.2454331
L. Mei, D. Williams and W. Eberle, "A predictive analog dead-time control circuit for a buck converter," 2013 26th IEEE Canadian Conference on Electrical and Computer Engineering (CCECE), pp.1-5, 2013. DOI: 10.1109/CCECE.2013.6567695
※ AI-Helper는 부적절한 답변을 할 수 있습니다.