최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기대한토목학회논문집 = Journal of the Korean Society of Civil Engineers, v.40 no.2, 2020년, pp.191 - 195
남영준 (연세대학교 건설환경공학과) , 김정현 (K-water 융합연구원) , 배철호 (K-water 융합연구원) , 임윤묵 (연세대학교 건설환경공학과)
In this work, tensile tests, one of the most common test method to assess the condition of a corroded pipe, were conducted. According to ASTM E8 method, the use of flat or curved uni-axial tension test is allowed under the recommendation with the usage of grips corresponding to a curvature of the pi...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
관의 상태를 평가하는 방법 중 직접평가는 무엇인가? | 간접평가는 관로의 제원과 환경을 통해서 평가를 진행한다. 직접평가는 관체 내·외면 상태를 직접 조사하는데 그 종류로는 인장 실험, 원주방향 휨 파괴강도 실험, 파열 인장실험 등이 있다. 그 중 본 연구에서는 인장 실험을 진행하였다. | |
곡률을 가진 관체를 대상으로 인장실험을 할 때 관체의 두꼐가 20mm 이하인 경우 어떻게 실험을 진행해야 하는가? | 평평한 시편을 실험할 때에는 곡률이 없기 때문에 인장실험기의 지그(zig)에 변화를 줄 필요가 없다. 하지만, 본 연구가 대상으로하는 관체의 경우 곡률이 있기 때문에, 관체의 두께가 20 mm 이하인 경우 인장 실험을 함에 있어 그 곡률에 맞는 지그를 제작하여 실험을 하거나 그립부분을 열을 가하지 않고 평평하게 가공을 하여 실험을 진행해야한다(ASTM E8, 2016). 본 연구에서 대상으로 하는 관체는 20 mm 이하의 벽 두께를 가진다. | |
부식으로 인한 관로의 상태를 정확하게 추정할 수 있는 기술이 필요한 이유는? | 그 이유는 주로 관로의 노후화에 있는 것으로 파악이 된다. 이에 대하여 K-water(2017)에서는 현재 노후관 개량에 대해 굉장히 큰 비용이 소요될 것으로 예측하고 있으며(광역 상수관로는 2030년까지 3조9천억원, 지방 상수도는 52조원이 소요될 것으로 추정), 육안으로 두께 게이지를 통한 기존의 점적인 조사를 통한 진단은 오진 즉, 구조물의 상태를 과소 혹은 과대평가할 위험성이 높다. 따라서 부식으로 인한 관로의 상태를 정확하게 추정할 수 있는 기술이 관로의 운영과 유지관리 측면에서 필요하다. |
ABAQUS (2014). User's manual: Version 6.14, Simulia, United States.
ASTM E8 (2016). Standard test methods for tension testing of metallic materials, ASTM International, West Conshohocken, PA, www. astm.org.
Fernandez, I., Bairan, J. M. and Mari, A. R. (2016a). "Mechanical model to evaluate steel reinforcement corrosion effects on ${\sigma}-{\varepsilon}$ and fatigue curves. Experimental calibration and validation." Engineering Structures, Vol. 118, pp. 320-333.
Fernandez, I., Bairan, J. M. and Mari, A. R. (2016b). "3D FEM model development from 3D optical measurement technique applied to corroded steel bars." Construction and Building Materials, Vol. 124, pp. 519-532.
Garbatov, Y., Guedes S. C., Parunov, J. and Kodvanj, J. (2014). "Tensile strength assessment of corroded small scale specimens." Corrosion Science, Vol. 85, pp. 296-303.
K-water (2017). Buried water main condition assessment.monitoring technology guide - Focus on non-destructive detection and structural condition monitoring, No. 2017-WS-SR-625-1000 (in Korean).
Sheng, J. and Xia, J. (2017). "Effect of simulated pitting corrosion on the tensile properties of steel." Construction and Building Materials, Vol. 131, pp. 90-100.
Wang, Y., Xu, S., Wang, H. and Li, A. (2017). "Predicting the residual strength and deformability of corroded steel plate based on the corrosion morphology." Construction and Building Materials, Vol. 152, pp. 777-793.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.