최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.19 no.1, 2020년, pp.29 - 35
채일석 (조선대학교 일반대학원 기계시스템.미래자동차공학과) , 김은지 (조선대학교 일반대학원 기계시스템.미래자동차공학과) , 김재열 (조선대학교 기계시스템미래자동차공학부)
Car inspection systems are regularly carried out by the state to ensure the safety and emission status of cars, thereby improving the safety and quality of life by reducing fine dust and greenhouse gases that are the main culprits of vehicle defects and air pollution. These automobile inspections ar...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Jo, H. S., Sim, J. I., Kim, J. R., "Quantitative Effectiveness Analysis of Vehicle Inspection," Journal of Korean Society of Transportation, Vol. 25, No. 3, pp. 65-74, 2007.
Jin, K. S., Lee, C. H., "A Study on the Characteristics of Smoke Emissions from Heavy Duty Diesel Vehicles Using a Chassis Dynamometer," Journal of the Korean Society of Safety, Vol. 24, No. 4, pp. 1-10, 2009.
Yi, C. S., Lee, T. E., Lee, C. W., "Numerical Analysis of the Internal Flow of 8kW Grade Diesel Generator Muffler," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 3, pp. 45-50, 2018.
Kim, T. H., Lee, C. W., "A Comparative Study on Engine Performance and Exhaust Emission Characteristics of Response Power 150HP & 240HP Turbocharged Marine Diesel Engine," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12, No. 1, pp. 43-51, 2013.
Yang, Y. J., "Study on Simulation of Fuel Injection Nozzle for Marine Medium Speed Diesel Engine," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12, No. 3, pp. 41-47, 2013.
Yi, C. S., Jeong, I. G., Suh, J. S., Park, C. D., Jeong, K. Y., "A Numerical Analysis on Flow Uniformity of SCR Reactor for 5,000PS Grade Marine Engine," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 6, pp. 28-35, 2012.
Yi, C. S., Lee, C. W., "A Study on the Exhaust Gas After Treatment for Small Ship," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 3, pp. 76-81, 2017.
Kim, Y. J., Park, K. S., "A Study of the Opacity Correlation Factor between the Filtration Type and Light Extinction Type Diesel Smoke Meters," Transactions of the Korean Society of Automotive Engineers, Vol. 15, No. 5, pp. 146-152, 2007.
Jung, Y. D., Yeo, U. S., Lim, Y. J., Ryu1, I. H., "Research on the Improvement of the Emission Inspection Program for Diesel Vehicle," Vehicles Transactions of the Korean Society of Automotive Engineers, Apr. 29, pp. 394-399, 2009.
Jo, J. G., Lee, D. W., "Research on the Relation of the Exhaust Gas Concentration between Lug-Down3 Test Mode and D147 Test Mode on the Driving Car Using Diesel Fuel," Korean Society for Atmospheric Environment, Oct. 13, pp. 62-65, 2008.
Kim, J. C., Eom, M. D., Park, Y. H., Kwon, S. I., Lee, J. B., Kim, J. W., Yeo, U. S., "Research on the Introduction and Application of the Road-Load Inspection Program for Heavy Duty Diesel Vehicle" Korean Society of Automotive Engineers, Vol. 1, pp. 306-311. 2005.
Chae, I. S., Kim, S. Y., Kim, J. Y., "Improvement of Soot Probe Efficiency for Automotive Emission Measurement." Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18, No. 8, pp. 74-81 2019.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.