최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기韓國地盤工學會論文集 = Journal of the Korean geotechnical society, v.36 no.2, 2020년, pp.29 - 42
이민지 (공주대학교 건설환경공학과) , 윤종석 (공주대학교 건설환경공학과) , 추연욱 (공주대학교 건설환경공학과)
In this study, centrifuge tests were performed to investigate the effect of the lateral load-moment combination on the p-y curves for 7 m-diameter monopiles installed in sand for offshore wind turbine. For the objectives, a centrifuge testing system was developed and tests were conducted at an accel...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
낙사법의 특징은 무엇인가? | 96으로 통일분류법에 의해 SP로 분류되는 모래이다. 모래지반 조성은 균질한 모래 지반의 조성이 가능하고, 낙사 높이 및 모래입자의 낙하속도를 조절하여 조성 지반의 밀도를 조절할 수 있는 낙사법(Sand Pluviation Method)을 이용하였다. | |
해상 풍력 발전단지 및 관련 기술의 개발이 증가하는 이유는 무엇인가? | 신재생에너지에 대한 수요의 급증으로 인하여 해상 풍력 발전단지 및 관련 기술의 개발이 증가하고 있다. 이러한 추세에 따라 해상발전기의 용량도 대형화 되어, 이를 지지하는 하부지지구조물도 대형화가 요구되고 있다. | |
수평하중-모멘트 조합의 영향을 분석하기 위한 실험의 진행 방식은 무엇인가? | 본 연구에서는 모래지반에 설치된 해상풍력 지지용 직경 7m 모노파일의 p-y 곡선에 대한 수평하중-모멘트 조합의 영향을 분석하기 위하여 원심모형실험을 수행하였다. 이를 위하여 원심모형실험시스템을 구축하였고, 다수의 게이지를 부착한 계측용 모노파일 모형을 사용하여 68.83g에서 원심모형실험을 수행하였다. 지표면으로부터 직경의 1배와 직경의 5배 높이에서 하중재하를 하는 2개의 수평하중-모멘트 조합으로 재하시험이 수행되었다. |
Achmus, M., Rahman, K. A., and Peralta, P. (2005), "On the Design of Monopile Foundations with Respect to Static and Quasi-static Cyclic Loading", Copenhagen offshore wind 2005.
Achmus, M., Kuo, Y. S., and Rahman, K.A. (2009), "Behavior of Monopile Foundations under Cyclic Lateral Load", Computers and Geotechnics 36, pp.725-735.
Alderlieste, E. A., Dijkstra, J., and Van Tol, A. F. (2011), "Experimental Investigation into Pile Diameter Effects of Laterally Loaded Mono-piles", Proceedings of the ASME 2011 30th International Conference on Ocean, Offshore and Arctic Engineering OMAE 2011, Rotterdam, The Netherlands.
API (American Petroleum Institute). (2011), "Geotechnical and Foundation Design Considerations", Washington, DC.
Bayton, S. and Black, J. (2016), "The Effect of Soil Density on Offshore Wind Turbine Monopile Foundation Performance", Proc. In the 3rd Eurofuge, Vol.16 pp.245-251.
Bienen, B. and Klinkvort, R. T., Fan, S., Black, J., Bayton, S., Thorel, L., Blanc, M., Madabhushi, G. S. P., Haigh, S., Broad, T., Zania, V., Askarinejad, A., Li, Q., Kim, D. S., Park, S., Almeida, M., Barra, M. F. W., Prendergast, L., Kong, D., and Zhu, B. (2019), "Centrifuge Benchmark Testing of Laterally Loaded Monopiles in Sand", Procds. of the 16th Asian Regional Conference on soil mechanics and Geotechnical Engineering.
Choo, Y. W., Kim, D. W., Park, J. H., Kwak, K. S., Kim, J. H., and Kim, D. S. (2014), "Lateral Response of Large Diameter Monopiles for Offshore Wind Turbines from Centrifuge Model Tests", Geotechnical Testing Journal, Vol.37, No.1.
Choo, Y. W. and Kim, D. W. (2016), "Experimental Development of the p-y Relationship for Large-diameter Offshore Monopiles in Sands: Centrifuge Tests", J. Geotech. Geoenviron. Eng., 2016, Vol. 142, No.1, 04015058.
DNV (Det Norske Veritas). (2014), "Design of Offshore Wind Turbine Structures" DNV-OS-J101, Hlvik, Norway.
Doherty, P. and Gavin, P. (2012), "Laterally Loaded Monopile Design for Offshore Wind Farms", Article in Energy, Vol.165, No.1, pp.7-17.
Dyson, G. J. and Randolph, M. F. (2001), "Monotonic Lateral Loading of Piles in Calcareous Sand", J. Geotech. Geoenviron. Eng. 2001. Vol.127, pp.346-352.
Haiderali, A. E. and Madabhushi, G. S. P. (2013), "Evaluation of the p-y Method in the Design of Monopiles for Offshore Wind Turbines", Offshore Technology Conference OTC 24088, Texas, USA.
Hearn, E. N. and Edgers, L. (2010), "Finite Element Analysis of an Offshore Wind Turbine Monopile", GeoFlorida 2010: Advances in Analysis, Modeling & Design, GSP 199 (C) 2010 ASCE.
Kim, K. J., Nam, B. H., and Youn, H. J. (2015), "Effect of Cyclic Loading on the Lateral Behavior of Offshore Monopiles Using the Strain Wedge Model", Hindawi Publishing Corporation Mathematical Problems in Engineering. Vol.2015, pp.12.
Kirkwood, P. (2015) "Cyclic Lateral Loading of Monopile Foundations in Sand", Ph. D. Thesis, University of Cambridge.
Klinkvort, R. T. (2018), "Monopile Design through Centrifuge Technology", OSIG Evening Geoforum, OSIG-SUT London, UK.
Klinkvort, R. T., Leth, C. T., and Hededal, O. (2010), "Centrifuge Modelling of a Laterally Cyclic Loaded Pile", Physical Modelling in Geotechnics - Springman, Laue & Seward (eds) (C) 2010 Taylor & Francis Group, London, ISBN 978-0-415-59288-8.
Kong, L. G. and Zhang, L. M. (2006) "Rate-controlled Lateral-load Pile Tests Using a Robotic Manipulator in Centrifuge", Geotech. Test.J., Vol.30(3), pp.192-201.
Lee, M. J., Yoo, M. T., Bae, G. T., Kim, Y. S., Nam, B. H., and Youn, H. J. (2019), "Centrifuge Tests on the Lateral Behavior of Offshore Monopile in Saturated Dense Sand under Cyclic Loading", Journal of Testing and Evaluation, Vol.47, No.3, pp.1809-1828.
Moller, I. F. and Christiansen, T. H. (2011), "Laterally Loaded Monopile in Dry and Saturated Sand-static and Cyclic Loading; Experimental and Numerical Studies", Master Project, June 2011 Aalborg University Esbjerg.
O'Neill, M. W. and Murchison, J. M. (1983), "An Evaluation of p-y Relationships in Sands", Research Rep. Dept. of Civil Engineering, Univ. of Houston, Houston, No. GT-DF02-83.
Park, J. O., Choo, Y. W., and Kim, D. S. (2009), "Evaluating of Bearing Capacity of Piled Raft Foundation on OC Clay Using Centrifuge and Numerical Modeling", Journal of the Korean Geotechnical Society, KGS, Vol.25, pp.23-33
Rahman, K. A. and Achmus, M. (2005), "Finite Element Modelling of Horizontally Loaded Monopile Foundations for Offshore Wind Energy Converters in Germany", Institute of Soil Mechanics, Foundation Engineering and Waterpower Engineering, University of Hannover, Germany.
Wilson, D. (1998), "Soil-pile-superstructure Interaction in Liquefying Sand and Soft clay", Ph. D. dissertation, University of California, Davis, CA
Yang, K. and Liang, R. (2006) "Methods for Deriving p-y Curves from Instrumented Lateral Load Tests", Geotech. Test. J., Vol.30(1), pp.1-8.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.