최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국전산구조공학회논문집 = Journal of the computational structural engineering institute of Korea, v.33 no.2, 2020년, pp.95 - 101
이보건 (동국대학교 기계로봇에너지공학과) , 서성원 (LG전자 ESS 개발팀) , 송명호 (동국대학교 기계로봇에너지공학과)
The wind turbine blades should be designed to possess a high stiffness and should be fabricated with a light and high strength material because they serve under extreme combination of lift and drag forces, converting kinetic energy of wind into shaft work. The goal of this study is to understand the...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
풍력터빈 블레이드란 무엇인가? | 풍력터빈 블레이드는 바람의 운동에너지를 축일로 변환하는 장치로서 상대적으로 고속 회전하면서 양력과 항력의 다양한 하중 조합과 진동에 견딜 수 있도록 내구 강도가 큰 경량의 재료를 선택하여 강성을 증가시키는 구조를 갖도록 설계되어야 한다. 본 연구는 CFRP 프리프레그를 사용하여 소형 풍력 블레이드를 제작하는 경우 공정 시간을 단축하는 기술을 개발하려는 목적으로 수행되었다. | |
소형 풍력블레이드 제작시 블래더 가압 방식을 적용할 때 얻을 수 있는 장점은? | 인장 강도 시험의 불확실도를 개선하기 위해 ASTM D638 규정을 수정하여 새로운 시편의 형상을 제안하였고, 기존 형상의 인장 강도와 유사한 평균값을 얻되 파단 위치의 재현성이 향상됨을 확인하였다. 일련의 실험을 통해 소형 풍력블레이드의 제작에 블래더 가압 방식을 적용하면 충분한 내구 강도를 확보하면서 공정시간을 단축할 수 있음을 확인하였다. | |
풍력 블레이드를 경량 블레이드로 만들 경우의 장점은? | 풍력 블레이드는 강성을 증가시키는 구조를 갖도록 설계하는 동시에 내구 강도가 큰 경량의 재료를 선택하여야 한다. 경량 블레이드는 로터의 회전 균형 유지 및 지지구조의 단순화에 유리하며, 보다 중요하게는 로터의 회전관성을 감소시켜서 회전수를 용이하게 제어하도록 하여 운전효율의 향상을 가능하게 한다. |
Czel, G., Jalavand, M., Wisnom, M.R. (2016) Hybrid Specimens Eliminating Stress Concentrations in Tensile and Compressive Testing of Unidirectional Composites, Compos.: Part A, 91, pp.436-447.
Davim, J.P., Reis, P. (2005) Damage and Dimensional Precision on Milling Carbon Fiber Reinforced Plastics Using Design Experiments, J. Mater. Proc. Technol., 160, pp.160-167.
Dvorak, P. (2017) Small Wind Market Size Worth $1.79 Billion by 2025, CAGR: 14.3%: Grand View Research Inc., www.windpowerengineering.com/small-wind-market-size.
Harman, A., Risborg, A., Wang, C.H. (2008) Experimental Testing of BMI Lamenates with Stress Concentrations and the Evaluation of SIFT to Predict Failure, Compos. Struct., 86, pp.85-95.
Herzog, D., J aesch ke, P., Meier, O ., H aferkamp, H. (2008) Investigations on the Thermal Effect Caused by Laser Cutting with Respect to Static Strength of CFRP, Int. J. Mach. Tools & Manuf., 48, pp.1464-1473.
Jureczko, M., Pawlak, M., Mezyk, A. (2005) Optimization of Wind Turbine Blades, J. Mater. Proc. Technol., 167, pp.463-471.
Kashfuddoja, M., Prasath, R.G.R., Ramji, M. (2014) Study on Experimental Characterization of Carbon Fiber Reinforced Polymer Panel Using Digital Image Correlation: A Sensitivity Analysis, Opt. & Lasers Eng., 62, pp.71-30.
Korea Wind Energy Industry Association (KWEIA) (2018) 2018 Annual Report on Wind Energy Industry in Korea, KWEIA Report.
Martin, D. (2018) QBlade Short Manual, http://www.q-blade.org/.
Mone, C., Hand, M., Bolinger, M., Rand, J., Heimiller, D., Ho, J. (2017) 2015 Cost of Wind Energy Review, Technical Report, NREL/TP-6A20-66861, p.10.
Noh, H.C., Yoon, Y.C. (2010) Effect of Random Poisson's Ratio on the Response Variability of Composite Plates, J. Comput. Struct. Eng. Inst. Korea, 23(6), pp.727-738.
Paiva, J.M.F., Mayer, S., Rezende, M.C. (2006) Comparison of Tensile Strength of Different Carbon Fabric Reinforced Epoxy Composites, Mater. Res., 9(1), pp.83-89.
Schubel, P.J., Crossley, R.J. (2012) Wind Turbine Blade Design, Energ., 5, pp.3425-3447.
Tang, X., Huang, X., Peng, R., Liu, X. (2015) A Direct Approach of Design Optimization for Small Horizontal Axis Wind Turbine Blades, CIRP 25th Design Conference Innovative Product Creation, pp.12-16.
Weinert, K., Kempmann, C. (2004) Cutting Temperatures and Their Effects on the Machining Behaviour in Drilling Reinforced Plastic Composites, Adv. Eng. Mater., 6(8), pp.684-689.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.