최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Composites research = 복합재료, v.33 no.2, 2020년, pp.76 - 80
허원욱 (Department of Organic Material Science and Engineering, Pusan National University) , 전길우 (Korea Textile Development Institute) , 안승국 (Department of Organic Material Science and Engineering, Pusan National University)
In this study, vacuum bag hot-press (V-HP) process can be used as an out-of-autoclave (OOA) process by improving the inefficient process of the autoclave forming method with excellent physical properties and surface quality. A carbon fiber composite was molded via V-HP process and analyzed the physi...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
진공백 가압프레스 공정의 특징은 무엇인가? | 진공백 가압프레스 공정은 기존 오토클레이브의 우수한 품질은 유지하면서 단가 및 생산공정의 단축이 가능하여 오토클레이브 공정을 대체할 수 있는 수단이 될 것으로 생각되나, 실제 산업으로의 적용을 위해서는 해당 공정으로 제작된 탄소섬유복합제와 기존 공정으로 제작된 복합제간 물성 비교분석이 필요하다. | |
오토클 레이브 공정의 한계는 무엇인가? | 다양한 복합재료의 제조공정은 생산공정과 효율 및 제품의 요구 물성에 따라 Hand lay-up, Vacuum assisted resin transfer molding(VaRTM), Hot-press molding, Autoclavemolding 등 다양한 형태로 발전되어 왔으며, 그 중 오토클 레이브 공정(Autoclave process)은 우수한 수지 함침성과 물성으로 각종 첨단수송 산업에서 핵심소재로 주목을 받았다. 그러나 높은 공정 운영비와 장시간의 성형시간은 최종 수요산업에서 단가상승과 생산성 저하의 원인이 되어 소재사용에 한계를 지닌다고 알려져 있다[1-3]. | |
오토클 레이브 공정이 첨단수송 산업에서 주목받은 이유는 무엇인가? | 다양한 복합재료의 제조공정은 생산공정과 효율 및 제품의 요구 물성에 따라 Hand lay-up, Vacuum assisted resin transfer molding(VaRTM), Hot-press molding, Autoclavemolding 등 다양한 형태로 발전되어 왔으며, 그 중 오토클 레이브 공정(Autoclave process)은 우수한 수지 함침성과 물성으로 각종 첨단수송 산업에서 핵심소재로 주목을 받았다. 그러나 높은 공정 운영비와 장시간의 성형시간은 최종 수요산업에서 단가상승과 생산성 저하의 원인이 되어 소재사용에 한계를 지닌다고 알려져 있다[1-3]. |
Grunenfelder, L.K., Centea, T., Hubert, P., and Nutt, S.R., "Effect of Room-temperature Out-time on Tow Impregnation in an Out-of-autoclave Prepreg", Composites: Part A, Vol. 45, 2013, pp. 119-126.
Centea, T., Grunenfelder, L.K., and Nutt, S.R., "A Review of Out-of-autoclave Prepregs - Material Properties, Process Phenomena, and Manufacturing Considerations", Compoistes: Part A, Vol. 70, 2015, pp. 132-154.
Thorfinnson, B., and Biermann, T., "Degree of Impregnation of Prepregs - Effects on Porosity", Proc 32nd int SAMPE Symp. Anaheim, CA: Society for the Advancement of Material and Process Engineering; 1987, p. 9.
Juska, T.D., Musser, B.S., Jordan, B.P., and Hall, J.C., "The New Infusion: oven Vacuum Bag Prepreg Fabrication", Proc SAMPE 2009 Conf. Baltimore, MD: Society for the Advancement of Material and Process Engineering, 2009.
Yoon, B.I., "Effect of Fiber Volume Fraction on the Mechanical Properties in Carbon Fiber-Epoxy Composites", Polymer Society of Korea, Vol. 12, No. 7, 1988, pp. 619-626.
Moon, Y.J., "A Study on the Shape of the Fiber-reinforced Composite Material According to the Durability and Mechanical Properties", Ph.D Thesis, Pukyong University, Korea, 2011.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.