최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.19 no.4, 2020년, pp.36 - 44
김동환 (한국국제대학교 항공부품공학과) , 설상석 (창원대학교 메카트로닉스연구원)
This study analyzed the deformation behavior of the high density polyethylene (HDPE) bottle in the blow molding process. We carried out finite element (FE) simulations using ANSYS Polyflow. First, the axisymmetric model was executed by 2D FE-simulation to determine the change of bottle wall thicknes...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
사출 인장 블로우 성형에서 패리손 형상 결정이 중요한 이유 | 특히, 압출 블로우 성형공법에서는 예비성 형체(Preform), 즉 패리손 형상을 결정하는 것이 매우 중요하다. 만약 패리손의 성형온도가 너무 높으면 고분자 소재의 용융강도(Melt Strength)가낮아져 처짐(Sagging)현상이 발생하고 반대로 온도가 낮으면 패리손의 두께 편차가 커 균일한 최종 제품으로 성형하기가 어렵다. | |
중공성형 또는 블로우 성형은 무엇인가? | 중공성형 또는 블로우 성형(Blow Molding)은 플라스틱 소재를 압출 즉, 사출 성형공법으로 패리손(Parison)을 만들어 이것을 금형 안으로 이송 시킨 후 공기를 주입시켜 성형하는 방법이다. 이 공법은 저렴한 비용으로 복잡하고 다양한 형상의 제품을 신속하게 양산 할 수 있는 장점이 있다[1~4]. | |
블로우 성형의 종류는? | 블로우 성형은 일반적으로 사출 인장 블로우 성형(Injection Stretch Blow Molding), 사출 블로우 성형(Injection Blow Molding), 그리고 압출 블로우 성형(Extrusion Blow Molding, Direct Blow Molding)의 세 가지 방법이 있다. |
Martienssen, W., Warlimoont, H., Springer Handbook of Condensed Matter and Materials Data, pp 483-485, 2005.
Lyu, M. Y., Kim, H. C., Lee, J. S., Shin, H. C. and Pae, Y., "Causes of Cracks in Petaloid Bottom of Carbonated PET Bottle," International Polymer Processing, 16, pp. 72-78. 2001.
Lyu, M. Y., Kim, H. C., Shin, H. C., Lee, J. S., Joo, S. T., Kim, Y. W., "A Study on the Bottom Design of Petaloid Carbonated PET Bottle to Prebent Bottom Crack," SPE ANTEC Technical Papers, 47, pp. 2808. 2001.
Lyu, M. Y., Kim, Y. H., "Investigation of Design Parameters and Novel Design of Pataloid PET Bottles," International Polymer Processing, Vol. 17, No. 3, pp. 279-283, 2002.
Lyu, M. Y., Pae, Y. L., "Bottom Design of Carbonated Soft Drink Polyethylene Terephthalate Bottle to Prevent Solvent Cracking," Journal of Applied Polymer Science, 2003.
Ansys, Ansys Inc, Tutorial 2. 2D axisymmetric Blow Molding, pp. 1-27, 2012
Ansys, Ansys Inc, Tutorial 4. 3D Blow Molding of a Bottle, pp. 1-10, 2012.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.