[논문]치과용 초음파 스케일러/수술기 통합 시스템의 스케일링 및 절삭 시 온도 변화에 관한 연구

사민우; 고태조; 김종영

doi:10.14775/ksmpe.2020.19.02.001

[국내논문] 치과용 초음파 스케일러/수술기 통합 시스템의 스케일링 및 절삭 시 온도 변화에 관한 연구
A Study on Temperature Changes during Bone Scaling and Cutting of Dental Ultrasonic Scaling/Surgery System 원문보기

한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.19 no.2, 2020년, pp.1 - 8

사민우 (SJ TOOLS 기업부설연구소) , 고태조 (영남대학교 기계공학부) , 김종영 (안동대학교 기계공학과)

Abstract ▼ AI-Helper

While dental clinics still use the ultrasonic scaling/surgery tool for teeth scaling and cleaning the tool's use is expanding steadily to include treatment of damaged teeth and bone tissue. In this study, a handpiece moving system (HMS) was developed to evaluate bone scaling and cutting in the field of dentistry. The HMS, through a scaling test of bone using a scaler tip, it was able to identify surface damage. Additionally, a thermos-graphic camera was used to observe the temperature distribution that occurred during the bone scaling and cutting process. Consequently, we found that increasing the working load increased the amount of surface damage. Changes in temperature distribution occurred slowly and were maintained within safety bounds for 10 minutes. Going forward, we will compare the HMS performance on scaling and cutting with other devices.

Keyword

AI 본문요약
AI-Helper

* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.

제안 방법

The focus of this study was to develop a new handpiece moving system (HMS) for precision testing, and to evaluate the characterization of experimental studies like temperature distribution during bone scaling and cutting by HMS after fabricating bone specimens.
The surgery unit was set at “low”, “medium” and “high” conditions.
Bone scaling tests were prepared according to the experimental procedure reported in previous studies^[10,12,14] , and the experiment performed at room temperature (19˚C). The cooling irrigation solution used was by distilled water stored at room temperature (19˚C).
. Heat generation of specimen and handpiece parts were studied by performing bone scaling and cutting tests using the Ultrasonic NX device for 2, 4, 6, 8, and 10 minutes. The amount of heat generated while operating the Ultrasonic NX device for 2, 4, 6, 8, and 10 minutes without moving test was compared to changes in heat regeneration during bone scaling and cutting at “high” setting conditions, as shown in Fig.
In this study, bone scaling and cutting testing was successfully carried out using a dental ultrasonic scaling/surgery system. With regard to the bone scaling and cutting times of the tested HMS, we found that increasing the working time and output will damage the bone surfaces.

참고문헌 (16)

Gurenlian, J. R., "The Role of Dental Plaque Biofilm in Oral Health," Journal of Dental Hygiene, Vol. 81, No. 5, 2007.
Shaddox, L. M. and Walker, C., "Treating chronic periodontitis: current status, challenges, and future directions," Clinical Cosmetic Investing Dental, Vol. 2, pp. 79-91, 2010.
Kenneth, W. Aschheim, "Esthetic Dentistry: A Clinical Approach to Techniques and Materials," Book Aid International, 2014.
Vercellotti, T., "Technological Characterstics and Clinical Indications of Piezoelectric Bone Surgery," Miverva Stomatologica, Vol. 53, pp. 207-214, 2004.
Lee, J.-H., Oh, J.-M., Hong, Y. W., Kim, S. K., Paik, J. H., Lee, Y.-J., Lee, J.-B. and Lee, S.-D., “Design and Evaluation of Ultrasonic Bone Surgical Instruments for Dental Application,” Journal of the Korean Institute of Electrical and Engineers, Vol. 25, No. 12, pp. 990-995, 2012.

원문보기 상세보기
Hennet, P., "Piezoelectric Bone Surgery: A Review of the Literature and Potential Applications in Veterinary Oral Maxillofacial Surgery," Frontiers in Veterinary Science, Vol. 2, No. 8, 2015.
Magrin, G. L., Sigua-Rodriquez, E. A., Goulart, D. R. and Asprino, L., "Piezosurgery in Bone Augmentation Procedures Previous to Dental Implant Surgery: A Review of the Literature," The Open Dentistry Journal, Vol. 9, pp. 426-430, 2015.

상세보기
Leong, T., Ashokkumar, M. and Kentish, S., “The Fundamentals of Power Ultrasound-A Review,” Acoustics Australia, Vol. 39, No. 2, pp. 54-63, 2011.

상세보기
Kwon, S. J., Park, Y. J., Jun, S. H., Ahn, J.-S., Lee, I. B., Cho, B. H., Son, H. H. and Seo, D. G., “Thermal Irritation of Teeth during Dental Treatment Procedures,” Restorative Dentistry & Endodontics, Vol. 38, No. 3, pp. 105-112, 2013.

원문보기 상세보기
Hong, J. W., "Effect of Wear on Tooth Surface and Efficiency of New Ultrasonic Scaler Tip," School of Dentistry, Master's Degree, Seoul National University, South Korea, 2013.
Baek, S.-H., Shon, W.-J., Bae, K.-S., Kum, K.-Y., Lee, W.-C. and Park, Y.-S., "Evaluation of the Safety and Efficiency of Novel Metallic Ultrasonic Scaler Tip on Titanium Surfaces," Clinical Oral Implants Research, Vol. 23, pp. 1269-1274, 2012.

상세보기
Harder, S., Wolfart, S., Mehl, C. and Kern, M., “Performance of Ultrasonic Devices for Bone Surgery and Associated Intraosseous Temperature Development,” The International Journal of Oral & Maxillofacial Implants, Vol. 24, No. 3, pp. 484-490, 2009.

상세보기
Sa, M. W., Shim, H. R., Ko, T. J., Lee, J. M. and Kim, J. Y., “A Study about Experimental Evaluation of an Ultrasonic Surgery Unit for Bone Cutting,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 1, pp. 1-7, 2016.
Lea, S. C, Felver, V, Landini, G. and Walmsley, A. D., “Ultrasonic Scaler Oscillations and Tooth-surface Defects,” Journal of Dental Research, Vol. 88, No. 3, pp. 229-234, 2009.

상세보기
Cardoni, A., MacBeath, A. and Lucas, M., "Methods for Reducing Cutting Temperature in Ultrasonic Cutting of Bone," Ultrasonics, Vol. 44, pp. 37-42, 2006.

상세보기
Eriksson, A. R., Albrektsson, T. and Albrektsson, B, R., “Heat Caused by Drilling Cortical Bone: Temperature Measured In Vivo in Patients and Animals,” Acta Orthopaedica Scandinavica, Vol. 55, No. 6, pp. 629-631, 1984.

상세보기

저자의 다른 논문 :

활용도 분석정보

상세보기

다운로드

내보내기

활용도 Top5 논문

해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증